HP HP0-P10, de formation et d'essai

Si vous vous inscriez le test HP HP0-P10, vous devez choisir une bonne Q&A. Le test HP HP0-P10 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification HP HP0-P10, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Code d'Examen: HP0-P10
Nom d'Examen: HP (HP Integrity Server Multi-OS Installation and Deployment)
Questions et réponses: 147 Q&As

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test HP HP0-P10 et passer le test à la première fois.

Obtenez la Q&A de test HP HP0-P10 de Pass4Test plus tôt, vous pouvez réussir le test Certification HP HP0-P10 plus tôt.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test HP HP0-P10, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test HP HP0-P10 coûtant un peu d'argent.

HP0-P10 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-P10.html

NO.1 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A

HP examen   HP0-P10 examen   HP0-P10 examen   HP0-P10   HP0-P10 examen   HP0-P10

NO.2 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB

HP   certification HP0-P10   certification HP0-P10   HP0-P10 examen

NO.3 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C

HP   HP0-P10   certification HP0-P10   HP0-P10 examen   HP0-P10

NO.4 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B

certification HP   HP0-P10   HP0-P10   HP0-P10 examen

NO.5 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C

HP examen   HP0-P10 examen   HP0-P10

NO.6 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A

HP   HP0-P10 examen   certification HP0-P10   HP0-P10

NO.7 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C

HP   HP0-P10 examen   HP0-P10   certification HP0-P10   HP0-P10   certification HP0-P10

NO.8 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C

HP   certification HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10

NO.9 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A

certification HP   certification HP0-P10   HP0-P10

NO.10 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE

HP examen   HP0-P10 examen   certification HP0-P10   HP0-P10   HP0-P10

NO.11 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B

HP   certification HP0-P10   HP0-P10 examen

NO.12 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B

HP   HP0-P10   HP0-P10 examen   HP0-P10

NO.13 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D

HP examen   HP0-P10   HP0-P10 examen

NO.14 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A

HP   HP0-P10   HP0-P10   HP0-P10 examen

NO.15 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A

certification HP   HP0-P10   HP0-P10 examen   certification HP0-P10   HP0-P10   HP0-P10 examen

NO.16 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D

certification HP   certification HP0-P10   certification HP0-P10   certification HP0-P10

NO.17 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B

certification HP   HP0-P10   HP0-P10   certification HP0-P10   certification HP0-P10

NO.18 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C

HP   HP0-P10 examen   HP0-P10

NO.19 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B

HP examen   certification HP0-P10   HP0-P10   HP0-P10   HP0-P10 examen   HP0-P10 examen

NO.20 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A

HP examen   certification HP0-P10   HP0-P10   HP0-P10

NO.21 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A

HP   HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10   HP0-P10

NO.22 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A

HP   HP0-P10   HP0-P10

NO.23 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C

HP   HP0-P10   HP0-P10   HP0-P10 examen

NO.24 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B

certification HP   HP0-P10   certification HP0-P10

NO.25 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C

HP examen   HP0-P10 examen   HP0-P10 examen   HP0-P10   certification HP0-P10

NO.26 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B

HP examen   certification HP0-P10   HP0-P10 examen   HP0-P10

NO.27 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE

HP   HP0-P10   HP0-P10 examen   HP0-P10 examen   certification HP0-P10   HP0-P10

NO.28 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B

HP   HP0-P10   HP0-P10   HP0-P10   HP0-P10

NO.29 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C

HP examen   HP0-P10   certification HP0-P10

NO.30 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B

HP   HP0-P10   HP0-P10 examen

Vous aurez une assurance 100% à réussir le test HP HP0-P10 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Meilleur HP HP0-S01 HP0-P11 HP0-P10 test formation guide

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test HP HP0-S01 HP0-P11 HP0-P10 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A HP HP0-S01 HP0-P11 HP0-P10 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test HP HP0-S01 HP0-P11 HP0-P10 plus facilement avec la Q&A de Pass4Test.

Pour vous laisser savoir mieux que la Q&A HP HP0-S01 HP0-P11 HP0-P10 produit par Pass4Test est persuadante, le démo de Q&A HP HP0-S01 HP0-P11 HP0-P10 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test HP HP0-S01 HP0-P11 HP0-P10 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Code d'Examen: HP0-S01
Nom d'Examen: HP (HP AssetCenter v5 x Software Exam)
Questions et réponses: 84 Q&As

Code d'Examen: HP0-P11
Nom d'Examen: HP (HP Integrity Entry-Level Server Techonlogies)
Questions et réponses: 205 Q&As

Code d'Examen: HP0-P10
Nom d'Examen: HP (HP Integrity Server Multi-OS Installation and Deployment)
Questions et réponses: 147 Q&As

Pass4Test est un seul site de provider le guide d'étude HP HP0-S01 HP0-P11 HP0-P10 de qualité. Peut-être que vous voyiez aussi les Q&A HP HP0-S01 HP0-P11 HP0-P10 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification HP HP0-S01 HP0-P11 HP0-P10. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test HP HP0-S01 HP0-P11 HP0-P10.

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

HP0-P10 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-P10.html

NO.1 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B

HP examen   certification HP0-P10   HP0-P10 examen   HP0-P10 examen   HP0-P10 examen

NO.2 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B

HP examen   HP0-P10   HP0-P10 examen

NO.3 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C

certification HP   HP0-P10   HP0-P10 examen

NO.4 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C

HP   certification HP0-P10   HP0-P10   certification HP0-P10

NO.5 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C

HP examen   certification HP0-P10   HP0-P10   HP0-P10

NO.6 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D

HP   HP0-P10 examen   HP0-P10   certification HP0-P10   HP0-P10 examen   HP0-P10

NO.7 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C

HP   HP0-P10   certification HP0-P10

NO.8 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B

certification HP   HP0-P10   certification HP0-P10

NO.9 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C

certification HP   certification HP0-P10   certification HP0-P10   HP0-P10

NO.10 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE

certification HP   HP0-P10 examen   certification HP0-P10   HP0-P10   HP0-P10

NO.11 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A

certification HP   HP0-P10   HP0-P10 examen

NO.12 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A

HP   certification HP0-P10   HP0-P10   HP0-P10

NO.13 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE

HP   certification HP0-P10   HP0-P10   HP0-P10   certification HP0-P10   certification HP0-P10

NO.14 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A

HP examen   HP0-P10   certification HP0-P10

NO.15 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B

HP examen   HP0-P10 examen   HP0-P10

NO.16 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB

HP   certification HP0-P10   certification HP0-P10

NO.17 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B

HP examen   HP0-P10   HP0-P10 examen   HP0-P10

NO.18 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B

HP   certification HP0-P10   certification HP0-P10

NO.19 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B

HP examen   HP0-P10   certification HP0-P10

NO.20 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C

HP   HP0-P10 examen   HP0-P10 examen

NO.21 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A

HP   HP0-P10 examen   HP0-P10 examen   HP0-P10   certification HP0-P10

NO.22 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B

HP   HP0-P10   HP0-P10   HP0-P10 examen   certification HP0-P10

NO.23 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D

HP   HP0-P10   certification HP0-P10   certification HP0-P10   certification HP0-P10

NO.24 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B

HP examen   HP0-P10   certification HP0-P10   certification HP0-P10

NO.25 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C

HP   HP0-P10   certification HP0-P10   certification HP0-P10   HP0-P10 examen

NO.26 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A

certification HP   certification HP0-P10   certification HP0-P10   HP0-P10

NO.27 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A

certification HP   certification HP0-P10   HP0-P10   certification HP0-P10   HP0-P10

NO.28 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A

HP   HP0-P10 examen   certification HP0-P10   HP0-P10 examen   HP0-P10   certification HP0-P10

NO.29 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C

certification HP   certification HP0-P10   HP0-P10   HP0-P10 examen

NO.30 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A

certification HP   HP0-P10   HP0-P10   HP0-P10 examen   certification HP0-P10

L'avènement de la certification HP pratique d'examen HP0-P10 questions et réponses

Le produit de Pass4Test peut assurer les candidats à réussir le test HP HP0-P10 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A HP HP0-P10 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Code d'Examen: HP0-P10
Nom d'Examen: HP (HP Integrity Server Multi-OS Installation and Deployment)
Questions et réponses: 147 Q&As

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification HP HP0-P10. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test HP HP0-P10.

Vous avez aussi la possibilité à réussir le test HP HP0-P10. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

HP0-P10 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-P10.html

NO.1 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE

HP   certification HP0-P10   HP0-P10 examen   HP0-P10

NO.2 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A

HP   certification HP0-P10   HP0-P10

NO.3 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B

HP   HP0-P10   certification HP0-P10

NO.4 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A

certification HP   HP0-P10   HP0-P10   HP0-P10   certification HP0-P10   HP0-P10 examen

NO.5 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B

HP   HP0-P10   HP0-P10   HP0-P10 examen

NO.6 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B

HP   HP0-P10 examen   certification HP0-P10   certification HP0-P10

NO.7 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C

HP   certification HP0-P10   HP0-P10   HP0-P10   HP0-P10

NO.8 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B

HP   certification HP0-P10   HP0-P10 examen

NO.9 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A

certification HP   HP0-P10   HP0-P10

NO.10 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B

HP   HP0-P10   certification HP0-P10   HP0-P10   HP0-P10

NO.11 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D

HP   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.12 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B

HP examen   HP0-P10 examen   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.13 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B

certification HP   HP0-P10   HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.14 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C

HP examen   HP0-P10   HP0-P10 examen

NO.15 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB

HP examen   HP0-P10   HP0-P10   certification HP0-P10   HP0-P10

NO.16 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A

HP examen   HP0-P10 examen   HP0-P10

NO.17 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C

certification HP   HP0-P10   HP0-P10   certification HP0-P10

NO.18 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A

HP examen   HP0-P10 examen   certification HP0-P10   HP0-P10   certification HP0-P10

NO.19 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C

HP   certification HP0-P10   certification HP0-P10

NO.20 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A

HP examen   HP0-P10 examen   HP0-P10

NO.21 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C

HP   HP0-P10 examen   HP0-P10

NO.22 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B

HP   HP0-P10   HP0-P10   certification HP0-P10   HP0-P10

NO.23 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C

HP   HP0-P10 examen   HP0-P10   HP0-P10   HP0-P10

NO.24 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A

certification HP   HP0-P10 examen   HP0-P10 examen   HP0-P10   HP0-P10

NO.25 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D

HP   HP0-P10   certification HP0-P10   HP0-P10 examen

NO.26 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE

HP examen   certification HP0-P10   HP0-P10 examen   HP0-P10 examen

NO.27 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B

certification HP   HP0-P10 examen   HP0-P10 examen   certification HP0-P10

NO.28 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C

HP examen   HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10

NO.29 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A

HP   HP0-P10   HP0-P10

NO.30 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C

certification HP   certification HP0-P10   HP0-P10   certification HP0-P10

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Pass4Test offre de HP HP0-P10 matériaux d'essai

Le test HP HP0-P10 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test HP HP0-P10. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test HP HP0-P10. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel HP HP0-P10 peut vous assurer à réussir 100% le test HP HP0-P10. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Avec l'aide du Pass4Test, vous allez passer le test de Certification HP HP0-P10 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de HP HP0-P10, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A HP HP0-P10 dans Pass4Test pour se former avant le test HP HP0-P10.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-P10. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: HP0-P10
Nom d'Examen: HP (HP Integrity Server Multi-OS Installation and Deployment)
Questions et réponses: 147 Q&As

HP0-P10 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-P10.html

NO.1 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A

HP   HP0-P10   HP0-P10   certification HP0-P10   HP0-P10

NO.2 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D

HP   certification HP0-P10   HP0-P10   HP0-P10

NO.3 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE

HP examen   certification HP0-P10   HP0-P10   HP0-P10

NO.4 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A

HP   HP0-P10   certification HP0-P10   HP0-P10 examen

NO.5 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A

HP   HP0-P10 examen   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.6 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B

HP   HP0-P10   HP0-P10

NO.7 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A

HP examen   HP0-P10   HP0-P10   HP0-P10 examen   certification HP0-P10

NO.8 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C

HP   certification HP0-P10   certification HP0-P10   certification HP0-P10   certification HP0-P10

NO.9 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D

HP   HP0-P10 examen   certification HP0-P10   HP0-P10 examen

NO.10 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B

certification HP   HP0-P10   HP0-P10   HP0-P10

NO.11 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB

HP   HP0-P10   HP0-P10   HP0-P10 examen   certification HP0-P10

NO.12 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B

HP   HP0-P10 examen   certification HP0-P10   HP0-P10 examen   HP0-P10 examen

NO.13 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C

certification HP   HP0-P10   certification HP0-P10   certification HP0-P10   HP0-P10

NO.14 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C

HP   HP0-P10 examen   HP0-P10   HP0-P10

NO.15 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B

HP   HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10

NO.16 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C

HP   HP0-P10   certification HP0-P10   certification HP0-P10

NO.17 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE

certification HP   HP0-P10 examen   certification HP0-P10

NO.18 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B

HP   HP0-P10   HP0-P10

NO.19 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B

certification HP   HP0-P10   HP0-P10

NO.20 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A

HP   HP0-P10 examen   HP0-P10 examen   certification HP0-P10

NO.21 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A

HP   HP0-P10   HP0-P10   HP0-P10 examen

NO.22 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C

certification HP   certification HP0-P10   HP0-P10   HP0-P10   HP0-P10 examen

NO.23 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C

HP   HP0-P10   certification HP0-P10   HP0-P10   HP0-P10   HP0-P10 examen

NO.24 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C

certification HP   HP0-P10   HP0-P10 examen

NO.25 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A

HP   HP0-P10   HP0-P10   HP0-P10

NO.26 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A

certification HP   HP0-P10   HP0-P10 examen   HP0-P10 examen

NO.27 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B

HP examen   certification HP0-P10   certification HP0-P10   HP0-P10 examen   certification HP0-P10

NO.28 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C

HP examen   certification HP0-P10   HP0-P10   HP0-P10   certification HP0-P10

NO.29 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B

HP   HP0-P10   HP0-P10

NO.30 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B

HP   HP0-P10   HP0-P10 examen   certification HP0-P10   HP0-P10

Le test HP HP0-P10 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test HP HP0-P10 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification HP HP0-P10.

Dernières HP HP0-P10 examen pratique questions et réponses

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test HP HP0-P10 à la première fois.

Participer au test HP HP0-P10 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat HP HP0-P10 symbole bien la professionnalité d'un travailleur dans cette industrie.

Code d'Examen: HP0-P10

Nom d'Examen: HP (HP Integrity Server Multi-OS Installation and Deployment)

Questions et réponses: 147 Q&As

Le test HP HP0-P10 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test HP HP0-P10. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test HP HP0-P10. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Le programme de formation HP HP0-P10 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test HP HP0-P10, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test HP HP0-P10.

HP0-P10 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-P10.html

NO.1 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A

HP   certification HP0-P10   HP0-P10   HP0-P10   HP0-P10 examen   HP0-P10

NO.2 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B

HP   certification HP0-P10   HP0-P10 examen

NO.3 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C

certification HP   HP0-P10   HP0-P10   HP0-P10 examen   certification HP0-P10

NO.4 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B

HP   certification HP0-P10   HP0-P10   certification HP0-P10

NO.5 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B

certification HP   HP0-P10   certification HP0-P10

NO.6 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A

HP   HP0-P10   certification HP0-P10

NO.7 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A

HP   HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.8 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C

HP   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.9 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B

certification HP   HP0-P10 examen   certification HP0-P10

NO.10 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B

HP   HP0-P10 examen   HP0-P10 examen

NO.11 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C

HP examen   certification HP0-P10   certification HP0-P10   HP0-P10 examen

NO.12 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE

HP   certification HP0-P10   HP0-P10 examen

NO.13 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A

HP   HP0-P10   HP0-P10   HP0-P10   HP0-P10 examen

NO.14 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C

HP   HP0-P10   certification HP0-P10   HP0-P10

NO.15 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A

certification HP   HP0-P10 examen   HP0-P10   certification HP0-P10

NO.16 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C

certification HP   HP0-P10   HP0-P10   HP0-P10

NO.17 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB

HP   HP0-P10 examen   HP0-P10   HP0-P10 examen

NO.18 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A

HP   HP0-P10 examen   HP0-P10   HP0-P10   HP0-P10 examen

NO.19 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B

certification HP   certification HP0-P10   HP0-P10   HP0-P10 examen   HP0-P10

NO.20 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D

HP   certification HP0-P10   HP0-P10 examen

NO.21 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C

certification HP   HP0-P10   HP0-P10 examen

NO.22 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B

HP   HP0-P10   certification HP0-P10   HP0-P10   HP0-P10 examen

NO.23 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A

HP   HP0-P10   HP0-P10 examen

NO.24 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B

HP   certification HP0-P10   certification HP0-P10   HP0-P10 examen   HP0-P10

NO.25 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B

HP   HP0-P10 examen   HP0-P10 examen   HP0-P10   HP0-P10

NO.26 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D

HP examen   certification HP0-P10   HP0-P10   certification HP0-P10   HP0-P10 examen

NO.27 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A

HP examen   HP0-P10 examen   HP0-P10 examen   HP0-P10

NO.28 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE

HP   HP0-P10   certification HP0-P10   certification HP0-P10

NO.29 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C

HP examen   HP0-P10 examen   certification HP0-P10   HP0-P10

NO.30 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C

HP   HP0-P10   HP0-P10 examen   HP0-P10   HP0-P10

Vous HP HP0-P10 pouvez télécharger le démo HP HP0-P10 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.