Dernières FileMaker FM0-308 examen pratique questions et réponses

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification FileMaker FM0-308, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Finalement, la Q&A FileMaker FM0-308 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test FileMaker FM0-308 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification FileMaker, vous aurez un meilleur salaire et une plus grande space à se développer.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Code d'Examen: FM0-308
Nom d'Examen: FileMaker (Developer Essentials for FileMaker 13)
Questions et réponses: 112 Q&As

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel FileMaker FM0-308 peut vous assurer à réussir 100% le test FileMaker FM0-308. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test FileMaker FM0-308 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test FileMaker FM0-308 réel est lancée. C'est possible à réussir 100% avec le produit de FileMaker FM0-308. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

En quelques années, le test de certification de FileMaker FM0-308 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de FileMaker FM0-308? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification FM0-308. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification FM0-308, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

FM0-308 Démo gratuit à télécharger: http://www.pass4test.fr/FM0-308.html

NO.1 Which two techniques could be used to successfully generate the data points for a pie chart?
(Choose two.)
A. Concatenate multiple number fields from the current record into a return-delimited list.
B. Set up multiple data series, each of which points to a number field in the current record.
C. Specify a summary field from a related set of records as the data series and put the chart in a
Subsummary layout part.
D. Specify a summary field from the current found set as the data series and put the chart in a
Leading Grand Summary layout part.
Answer: A,D

FileMaker examen   certification FM0-308   FM0-308 examen   FM0-308 examen   FM0-308

NO.2 Which two FileMaker Pro 13 objects will display data contents even if unrelated to the current
layout's table occurrence? (Choose two.)
A. Merge variable
B. Indexed timestamp field
C. A text field from a shadow table
D. Globally stored number field placed in a portal
E. A container field defined with the Store as reference only option enabled
Answer: A,D

FileMaker   certification FM0-308   certification FM0-308   certification FM0-308

NO.3 Which statement is true about a container field set to Store container data externally in
FileMaker 13?
A. Data will not be stored externally if the file is transferred to an iOS device and used via FileMaker
Go 13.
B. Externally stored container data will not be backed up by FileMaker Server 13 scheduled backup
routines.
C. When hosted on FileMaker Server, external container data must be stored in a subdirectory of
the database folder.
D. Externally stored container data will be embedded in the file when it is downloaded via the
Server Admin Console.
Answer: A

FileMaker examen   certification FM0-308   FM0-308   FM0-308   FM0-308 examen   FM0-308 examen

NO.4 A table in a FileMaker 13 solution has a text field CompanyName. The following field
validation options are set for this field:
-Validate data in this field only during data entry -Allow user to override during data entry -Require
not empty -Display custom message if validation fails
A user imports a set of records into this table. Some records have no value in the CompanyName
field. What will occur?
A. All of the records will be imported, No error message will be displayed.
B. The user will see the custom error message, but the import will continue if the user overrides the
error.
C. All records with a value for CompanyName will be imported. The user will see the specified
custom message.
D. All records with a value for CompanyName will be imported. The user will see an error dialog
from the FileMaker Pro application stating that some records could not be imported due to errors,
along with a count of those records.
Answer: A

FileMaker examen   certification FM0-308   FM0-308 examen   certification FM0-308   FM0-308   FM0-308 examen

NO.5 What is the maximum number of files that can be hosted on FileMaker Server 13?
A. 100
B. 125
C. 250
D. 999
Answer: B

certification FileMaker   certification FM0-308   FM0-308 examen   certification FM0-308

NO.6 A text field called FirstLast in FileMaker Pro 13 is set to auto-enter the following formula:
FirstName & " " & LastName
FirstName and LastName are text fields in the same table. The option Do not evaluate if all
referenced fields are empty is unchecked. The option Do not replace existing value of field (if any) is
checked.
Under which two circumstances will the value of the calculation be inserted into the FirstLast field?
(Choose two.)
A. A record is first created
B. Each time the value of the FirstName or LastName field is modified
C. A user selects the menu item Records> Relookup Field Contents
D. Any field value on the record is modified and the FirstLast field is empty
E. The FirstName or LastName field is modified and the FirstLast field is empty
Answer: A,E

FileMaker examen   FM0-308 examen   certification FM0-308   certification FM0-308   FM0-308   certification FM0-308

NO.7 What is the maximum number of recursive calls that can be made utilizing a custom function
in FileMaker Pro 13 Advanced?
A. 10,000
B. 32,000
C. 50,000
D. 64.000
Answer: C

certification FileMaker   FM0-308 examen   certification FM0-308   FM0-308

NO.8 Which three field options may be set for a shadow field from an External ODBC Data Source?
(Choose three.)
A. Validation: not empty
B. Validation: unique value
C. Validation: existing value
D. Auto-enter creation timestamp
E. Auto-enter serial number, on creation
F. Storage: automatically create indexes as needed
Answer: A,D,E

FileMaker examen   FM0-308 examen   certification FM0-308   FM0-308 examen   FM0-308 examen

Dernières FileMaker FM0-303 examen pratique questions et réponses

Vous allez choisir Pass4Test après essayer une partie de Q&A FileMaker FM0-303 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification FileMaker FM0-303.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat FileMaker FM0-303. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test FileMaker FM0-303. Choisir le produit de Pass4Test particulier pour le test Certification FileMaker FM0-303 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A FileMaker FM0-303 de Pass4Test.

En quelques années, le test de certification de FileMaker FM0-303 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de FileMaker FM0-303? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification FM0-303. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification FM0-303, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test FileMaker FM0-303 et passer le test à la première fois.

Code d'Examen: FM0-303
Nom d'Examen: FileMaker (Developer Essentials for FileMaker 9)
Questions et réponses: 335 Q&As

FM0-303 Démo gratuit à télécharger: http://www.pass4test.fr/FM0-303.html

NO.1 What is the maximum number of bytes available in a FileMaker Pro 9 text field?
A. 64 megabytes
B. 1 gigabyte
C. 2 gigabytes
D. 4 gigabytes
E. Limited only by disk space
Answer: C

certification FileMaker   certification FM0-303   certification FM0-303   FM0-303   FM0-303

NO.2 Which two statements are true about the [Guest] account that is included by default when creating a
new FileMaker Pro 9 database? (Choose two.)
A. It is not enabled.
B. It cannot be deleted.
C. It can log in without entering a password.
D. It can log in using Instant Web Publishing without entering either a username or password.
Answer: AB

FileMaker   certification FM0-303   FM0-303   certification FM0-303   FM0-303   FM0-303

NO.3 Which of the following are supported in FileMaker 9 as External ODBC Data Sources?
A. Oracle 10g, Oracle 11g, SQL Server Express, SQL Server 2005, MySQL 5.0 Community Edition
B. Oracle 9g, Oracle 10g, SQL Server 2000, SQL Server 2005, MySQL 5.0 Community Edition
C. Oracle 10g, Oracle 11g, SQL Server 2000, SQL Server 2005, MySQL 5.0 Community Edition
D. Oracle 9g, Oracle 10g, SQL Server 2000, SQL Server 2005, MySQL 5.0 Enterprise Server
Answer: B

FileMaker examen   FM0-303 examen   certification FM0-303   FM0-303

NO.4 In FileMaker Pro 9, which two statements about portals are true? (Choose two.)
A. Container fields can be placed in portals.
B. The initial row setting of a portal can be set by a script.
C. A sort order applied to a portal overrides any sort order set up for the relationship.
D. If there are multiple portals on a layout, the Go to Portal Row [First] script step will activate the portal
closest to the top, left corner of the layout.
Answer: AC

FileMaker   FM0-303   FM0-303   FM0-303 examen

NO.5 A layout showing records from a People table has the Save record changes automatically check box
disabled in the Layout Setup dialog.
Which two actions cause FileMaker Pro 9 to display a dialog asking whether or not you want to save
changes to the current record? (Choose two.)
A. Importing records into the People table
B. Editing a field value on the layout and attempting to commit the record
C. Running a script that navigates to that layout, changes a field value, and performs a Commit
Records/Requests[No Dialog] script step
D. Running a script that navigates to that layout, changes a field value, and performs a Commit
Records/Requests[Skip data entry validation] script step
Answer: BD

FileMaker examen   certification FM0-303   certification FM0-303   FM0-303 examen

NO.6 Which of the following is a likely reason why a file converted from FileMaker Pro 6 to FileMaker Pro 9
may open slowly?
A. Use of repeating fields
B. Obsolete data sources
C. Using outdated script steps
D. Having to resolve 2-digit year dates
Answer: B

FileMaker   FM0-303   FM0-303   FM0-303 examen   FM0-303

NO.7 Which three of the following actions in FileMaker Pro 9 will directly trigger a FileMaker Pro 6 database
to be converted? (Choose three.)
A. Open the FileMaker Pro 6 file
B. Import / access data from the file
C. Import / access a value list from the file
D. Use the Convert File script step on the file
E. Drag and drop the file onto the FileMaker Pro 9 icon
Answer: ADE

FileMaker examen   FM0-303   certification FM0-303   certification FM0-303   FM0-303   certification FM0-303

NO.8 Which two of the following statements are true regarding tooltips? (Choose two.)
A. Tooltips are not visible in Preview mode.
B. Tooltip text can only incorporate indexed/stored data.
C. A tooltip can be attached to any FileMaker layout object (excluding parts).
D. Tooltips created in FileMaker Pro 9 Advanced can be edited in FileMaker Pro 9, but not added or
deleted.
Answer: AC

FileMaker examen   FM0-303   FM0-303   certification FM0-303

NO.9 In order to retain FileMaker Pro 6 database behavior, FileMaker Pro 9 may insert a Select Window
script step after which two of the following script steps as the file is converted? (Choose two.)
A. Open File
B. Go To Layout
C. Perform Script
D. Refresh Window
E. Go to Related Record
Answer: CE

FileMaker examen   FM0-303 examen   FM0-303   FM0-303 examen   FM0-303

NO.10 Which software is required to share FileMaker data via ODBC to remote clients?
A. FileMaker Server 9
B. FileMaker Pro 9 Advanced
C. FileMaker Server 9 Advanced
D. Internet Information Server (IIS)
Answer: C

FileMaker   FM0-303 examen   FM0-303 examen   FM0-303

NO.11 Which three functions can be performed using the Save Records As PDF script step? (Choose three.)
A. Append to an existing PDF file
B. Add a password to an existing PDF file
C. Specify the magnification for the initial view
D. Enable the copying of text, images, and other content
E. Set the color scale of the document to Black & White
Answer: ACD

FileMaker examen   FM0-303 examen   FM0-303   FM0-303 examen   FM0-303   certification FM0-303

NO.12 When running FileMaker Server 9 Advanced in an environment that uses a firewall, which ports, at a
minimum, need to be open for FileMaker Pro 9 and FileMaker Server Admin Console to communicate
with FileMaker Server Advanced across the firewall from an end user machine?
A. Ports 5003, 5006, 50003
B. Ports 2399, 5003, 16000
C. Ports 5003, 16000, 16001
D. Ports 16000, 16001,16004
Answer: C

FileMaker   FM0-303   FM0-303 examen   FM0-303   certification FM0-303   FM0-303

NO.13 Which three statements are true about FileMaker Pro 9 Advanced? (Choose three.)
A. It can import tables directly from a FileMaker Pro 8 file.
B. It can import tables directly from a FileMaker Pro 6 file.
C. It will retain internal IDs for fields when importing tables.
D. It can copy/paste script steps, scripts, fields, and tables.
E. It can import relationships and table occurrences from FileMaker Pro 9 files.
Answer: ACD

FileMaker   FM0-303 examen   FM0-303   FM0-303

NO.14 Which two statements are correct regarding the FileMaker Pro 9 batch conversion process when
converting files from FileMaker Pro 6? (Choose two.)
A. A .fp7 extension is added to filenames that do not have file extensions.
B. Existing files are automatically suffixed with 'Old' (i.e., Customer Old.fp5).
C. A prompt is displayed asking where the converted files should be created.
D. Multiple files converted at the same time will be copied into one file with multiple tables.
E. A solution organized with files in nested folders should be converted one level at a time starting with the
files in the highest level / folder.
Answer: AC

FileMaker   FM0-303   FM0-303 examen   FM0-303

NO.15 Script A:
Allow User Abort [Off]
Go To Layout ["Layout1"]
Pause/Resume Script [Indefinitely]
Perform Script ["Script B"]
Go To Layout ["Layout2"]
Pause/Resume Script [Indefinitely]
Script B:
Go To Layout ["Layout3"]
Pause/Resume Script [Indefinitely]
Allow User Abort [On]
Go to Layout "Layout4"]
Pause/Resume Script [Indefinitely]
When Script A is run, on which layout(s) will both the "Continue" and "Cancel" buttons be displayed
during the Pause/Resume script steps? (Assume the Status Area is visible.)
A. Layout4
B. Layout1 and Layout3
C. Layout1 and Layout2
D. Layout2 and Layout4
E. Layout1, Layout2, and Layout3
Answer: D

FileMaker examen   FM0-303 examen   certification FM0-303   FM0-303

NO.16 When importing table schema and data using FileMaker Pro 9 Advanced, which statement is true?
A. Privileges from the source file are retained
B. Relationships between tables are imported
C. Tables can be imported directly from FileMaker Pro 6 files
D. The user must have [Full Access] privileges to both the source and destination files
Answer: D

FileMaker   FM0-303   certification FM0-303   FM0-303   FM0-303

NO.17 For FileMaker Pro 9 files that are opened (i.e. to resolve a relationship) and where the window
remains hidden, which statement is true about a script set to perform when opening this file?
A. It will not execute.
B. It will execute as soon as the file is opened.
C. It will execute as soon as the file's first window is drawn.
D. It will execute when the file is opened only if the script has the run script with full access privileges
option enabled.
Answer: C

FileMaker   FM0-303   FM0-303 examen   FM0-303 examen   certification FM0-303

NO.18 When publishing FileMaker 9 files for web access, which two statements are true? (Choose two.)
A. In order to work with a FileMaker Pro database via Instant Web Publishing, a user's web browser must
have JavaScript enabled.
B. In order to access a FileMaker Pro database using Instant Web Publishing, a user account must have
the [fmiwp] extended privilege enabled.
C. A FileMaker Pro database may be configured for access via either Custom Web Publishing with XML
OR Custom Web Publishing with PHP, but not both.
D. A FileMaker Pro database hosted via Instant Web Publishing using the FileMaker Pro or FileMaker Pro
Advanced client can only be accessed by programs and users on the same computer.
Answer: AB

FileMaker   FM0-303   certification FM0-303   certification FM0-303   FM0-303 examen

NO.19 Which three of the following are supported operating systems for FileMaker Pro 9 and FileMaker Pro 9
Advanced? (Choose three.)
A. Mac OS X 10.4.8
B. Mac OS X 10.3.9
C. Windows Vista Ultimate
D. Windows XP Professional (Service Pack 1)
E. Windows XP Professional (Service Pack 2)
Answer: ACE

FileMaker   FM0-303 examen   FM0-303   FM0-303

NO.20 Which elements of a FileMaker file should be reviewed for behavior consistency after converting from
FileMaker Pro 6 to FileMaker Pro 9? (Choose four.)
A. Record locking
B. Repeating fields
C. Calculation results
D. Instant Web Publishing settings
E. Scripts set to perform When opening this file in File Options
Answer: ACDE

FileMaker examen   certification FM0-303   FM0-303   FM0-303   FM0-303 examen

NO.21 Click the Exhibit button.
A user wants to build a FileMaker Pro 9 database that models a business organizational chart. One
person may manage zero or more people. One person may be managed by, at most, one other person.
The user wants to build the system in such a way that a single layout about a person can display the
name of the current person's manager as well as a portal of the people managed by the current person
(as shown in the Exhibit).
Assume that there are no lookup fields, calculation fields, or fields with auto-entered calculations defined
in any table, and there are no scripts in the file.
What is the minimum number of table occurrences that must be used to construct the layout?
A. 1
B. 2
C. 3
D. 4
Answer: C

FileMaker examen   FM0-303   FM0-303 examen   certification FM0-303   FM0-303

NO.22 Which three statements are true about field indexing in FileMaker Pro 9? (Choose three.)
A. Indexing improves the speed at which finds are performed.
B. Value lists require at least one referenced field to be indexed.
C. To establish a relationship between two fields, both fields are required to be indexed.
D. Using Unicode as the default language by which a field is indexed causes sorts on that field to be case
sensitive.
E. A value index, used in establishing relationships, stores up to 60 primary characters or digits per
return-delimited line.
Answer: ABD

FileMaker   certification FM0-303   FM0-303 examen   FM0-303   FM0-303   FM0-303 examen

NO.23 Which three of the following are supported operating systems for FileMaker Server 9 and Filemaker
Server 9 Advanced? (Choose three.)
A. Mac OS X Server 10.4.9
B. Mac OS X Server 10.3.9
C. Windows NT Server SP4
D. Windows XP Professional SP2
E. Windows 2003 Server Standard Edition SP2
Answer: ADE

FileMaker examen   FM0-303   FM0-303   FM0-303

NO.24 What is the maximum number of characters that can be entered or imported into a single record's text
field in FileMaker Pro 9?
A. 64 thousand
B. 1 million
C. 1 billion
D. 2 billion
E. Limited only by disk space
Answer: C

FileMaker   FM0-303   certification FM0-303   FM0-303 examen   FM0-303

NO.25 On conversion to FileMaker Pro 9, what does the old password from a FileMaker Pro 6 file become?
A. A privilege set
B. Only the account name
C. Only the account password
D. Both an account name and account password
Answer: D

FileMaker examen   FM0-303   certification FM0-303

NO.26 What are the theoretical maximum limits of file size and record count in FileMaker Pro 9?
A. 8 gigabytes file size and 64 billion records
B. 64 gigabytes file size and 64 billion records
C. 2 gigabytes file size and 100 million records
D. 8 terabytes file size and 64 quadrillion records
Answer: D

FileMaker   FM0-303   certification FM0-303   FM0-303   FM0-303

NO.27 How many simultaneous Instant Web Publishing sessions can FileMaker Server 9 Advanced host?
A. 50
B. 100
C. 125
D. 250
Answer: B

certification FileMaker   FM0-303   FM0-303   certification FM0-303   FM0-303

NO.28 Which two of the following are true about the Data Viewer in FileMaker Pro 9 Advanced? (Choose two.)
A. It always displays the values of all global variables defined in a file.
B. It can only be accessed by users with the [Full Access] privilege set.
C. It can be used to manually change the value of a variable during debugging of a script.
D. It automatically displays the values of fields referenced by calculations used in the currently running
script.
Answer: CD

FileMaker   FM0-303   FM0-303

NO.29 Click the Exhibit button.
A user can install FileMaker Server, the Web Publishing Engine, and all of the associated software
components on the same machine as the web server. Which two of the following groups of ports must
be open to provide database services, web services, and administrative services via the Admin Console?
(Choose two.)
A. 80, 5003, 16004
B. 80, 5003, 16000
C. 5003, 5006, 16014
D. 16001,16016, 16018
E. 16001, 16004, 16007
Answer: BD

FileMaker   FM0-303   FM0-303   FM0-303

NO.30 Given: A one-to-many relationship from Planet to Moon. Which two formulas could be used as a
calculation field in the Planet table to return the name of the last related Moon record? (Choose two.)
A. Max (Planet::Name)
B. GetNthRecord (Planet::Name ; Count (Planet::Name))
C. GetNthRecord (Planet::Name ; Max (Planet::Name))
D. Let ( planetList = List (Planet::Name) ;
GetValue (planetList ; ValueCount (planetList)))
Answer: BD

certification FileMaker   certification FM0-303   FM0-303   certification FM0-303   FM0-303

Si vous êtes intéressé par l'outil formation FileMaker FM0-303 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Pass4Test offre de FileMaker FM0-301 matériaux d'essai

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test FileMaker FM0-301 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test FileMaker FM0-301 réel est lancée. C'est possible à réussir 100% avec le produit de FileMaker FM0-301. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Le test FileMaker FM0-301 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test FileMaker FM0-301. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Pass4Test vous promet de vous aider à passer le test FileMaker FM0-301, vous pouvez télécharger maintenant les Q&As partielles de test FileMaker FM0-301 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Le Certificat FileMaker FM0-301 est un passport rêvé par beaucoup de professionnels IT. Le test FileMaker FM0-301 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test FileMaker FM0-301. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test FileMaker FM0-301 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A FileMaker FM0-301 pour prendre un essai.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Le test simulation FileMaker FM0-301 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test FileMaker FM0-301 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test FileMaker FM0-301 à se preuver. Mais le taux du succès et bien bas. Participer le test FileMaker FM0-301 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Code d'Examen: FM0-301
Nom d'Examen: FileMaker (Filemaker7 Developer essentials exam)
Questions et réponses: 120 Q&As

FM0-301 Démo gratuit à télécharger: http://www.pass4test.fr/FM0-301.html

NO.1 Given the following formula:
If( DayOfWeek (myDate) = 3 and (myField = 13 or myField = 23) ;
Get (FoundCount) ; Get (TotalRecordCount))
Which two statements are true? (Choose two.)
A. If myField is 13, the test to see if myField = 23 will not be performed.
B. If DayOfWeek(myDate) returns 6, neither of the tests involving myField will be performed.
C. If DayOfWeek(myDate) returns 3 and myField returns 8, then this formula will return the total number
of records in the found set.
D. Regardless of whether the test is true or false, both Get(FoundCount) and Get(TotalRecordCount) will
be evaluated during execution of this formula.
Answer: AB

certification FileMaker   FM0-301   FM0-301   certification FM0-301   certification FM0-301

NO.2 Which three are affected by changing the behavior of a field to navigate to the next field using Tab,
Enter and Return in FileMaker Pro 7? (Choose three.)
A. exiting a record
B. executing a find
C. scripted navigation
D. navigating tab order
E. continuing a paused script
Answer: ABE

FileMaker   FM0-301   certification FM0-301   FM0-301   FM0-301

NO.3 What is the maximum number of characters that can be entered or imported into a text field in
FileMaker Pro 7?
A. 64 thousand
B. 1 million
C. 1 billion
D. 1 trillion
E. Number of characters is limited only by disk space.
Answer: C

FileMaker   certification FM0-301   FM0-301   certification FM0-301   FM0-301 examen

NO.4 Click the Exhibit button.
Given the FileMaker Pro 7 Relationships Graph shown in the exhibit, which table occurrence should be
assigned to a layout that contains a portal that shows all students for all of a teacher's classes?
A. Classes
B. Advisors
C. Teachers
D. Enrollment
Answer: C

FileMaker   FM0-301   FM0-301   FM0-301

NO.5 If a field in FileMaker Pro 7 has been set to validate Always, which three actions will trigger validation
on that field? (Choose three.)
A. importing data into that field
B. exporting data from that field
C. editing data in the field using Instant Web Publishing
D. clicking into the field, then immediately exiting the field
E. attempting to change the value of the field using a Set Field[ ] script step
Answer: ACE

FileMaker   FM0-301   FM0-301

NO.6 Click the Exhibit button.
You have a FileMaker Pro 7 layout based on the table occurrence of Classes. You have a portal showing
records from the table occurrence Students.
What happens if you place the field Students::Name into the portal?
A. The field displays <Field Missing> .
B. The field displays an enrolled student's name in each row of the portal.
C. The field displays the first matching student's name in every portal row.
D. The field displays an enrolled student's name in each row of the portal only if the student name is
calculated in the Enrollment table.
Answer: B

FileMaker examen   certification FM0-301   FM0-301

NO.7 Click the Exhibit button.
You want to build a FileMaker Pro 7 database that models a business organizational chart. One person
may manage no one or many people. One person may be managed by at most one other person.
You want to build the system in such a way that a single layout showing information about a person can
display both the name of the current person's manager (if any) and the names of all people managed by
the current person.
What is the minimum number of tables you must define in the Tables tab of the Define Database dialog to
construct the layout?
A. one
B. two
C. three
D. four
Answer: A

FileMaker examen   FM0-301 examen   FM0-301

NO.8 What is the maximum number of files that can be hosted on FileMaker Server 7?
A. 125
B. 250
C. 350
D. 500
E. The number is limited only by server hardware.
Answer: A

FileMaker   certification FM0-301   certification FM0-301

NO.9 Consider two FileMaker Pro 7 files, Alpha and Beta, where a table from Beta appears as an externally
referenced table occurrence on Alpha's Relationships Graph. Which three statements are true? (Choose
three.)
A. Layouts in Alpha can display data from Beta.
B. Alpha can contain multiple valid file references to Beta.
C. It is impossible to lock records in both Alpha and Beta simultaneously.
D. Layouts from Beta cannot be displayed in the same window as layouts from Alpha.
E. A table occurrence from Beta is required on Alpha's Relationships Graph in order to call a script in Beta
from Alpha.
Answer: ABD

FileMaker   FM0-301   FM0-301 examen   FM0-301

NO.10 Which three statements are true about field indexing in FileMaker Pro 7? (Choose three.)
A. Indexing improves the speed at which finds are performed.
B. Value lists require at least one of any field they reference to be indexed.
C. To establish a relationship between two fields, both fields are required to be indexed.
D. A value index, used in establishing relationships, stores up to 60 primary characters or digits per
return-delimited line.
E. Using Unicode or ASCII as the default language by which a field is indexed causes sorts on that field to
be case sensitive.
Answer: ABE

certification FileMaker   FM0-301 examen   FM0-301   certification FM0-301   FM0-301   certification FM0-301

NO.11 Click the Exhibit button.
On a FileMaker Pro 7 layout based on the table occurrence Teachers, a portal is designed to show all the
students based on the table occurrence Students. Which two statements are true about adding a new
student in the portal? (Choose two.)
A. The table occurrence Students must be directly connected to Teachers.
B. All the relationships from Teachers to Students must be set to be able to create records.
C. Only the relationship between Enrollment and Students must allow creation of related records.
D. All the relationships between the table occurrence Teachers and the table occurrence Students must
use the = operator.
Answer: CD

FileMaker   FM0-301 examen   FM0-301

NO.12 Which three statements about field validation are true in FileMaker Pro 7? (Choose three.)
A. Fields can only be validated by a single criterion.
B. Field validation warnings may be triggered by scripts.
C. Users can be prevented from overriding the validation warning.
D. Users can be presented with a specific message that will see when a field fails validation.
E. A script can be specified to run when manually entered field data fails validation.
Answer: BCD

FileMaker   FM0-301 examen   FM0-301   FM0-301   certification FM0-301

NO.13 A database has two tables, Planet and Moon. Moons are related to a single planet and their
relationship is set to delete related records in the Moon table when a Planet record is deleted. Which
two things happen when the Planet table is deleted from the Tables tab of the Define Database dialog?
(Choose two.)
A. All data in the Planet table are deleted.
B. All records in the Moon table are deleted.
C. All records in the Moon table remain unaffected.
D. All records in the Moon table are deleted if the option to "Also remove occurrences of these tables in
the graph" was selected when deleting the Planet table.
E. All table occurrences of both Planet and Moon tables are removed if the option to "Also remove
occurrences of these tables in the graph" was selected when deleting the Planet table.
Answer: AC

certification FileMaker   FM0-301   FM0-301   FM0-301   FM0-301

NO.14 Which two statements about relationships are true in FileMaker Pro 7? (Choose two.)
A. The > operator only works using numeric match fields.
B. You can build a relationship using multiple match fields.
C. It is possible to create a valid relationship where one match field is unindexed.
D. A table occurrence must be connected to at least one other table occurrence.
E. When enabling the option, "Allow creation of records in this table via this relationship", only =, >=,
<= will properly populate match keys.
Answer: BC

certification FileMaker   FM0-301   FM0-301   FM0-301   FM0-301

NO.15 Click the Exhibit button
Consider a FileMaker Pro 7 database with two tables called Salesperson and Order, and a relationship
between the two tables based on a SalespersonID field. The relationship is configured as shown in the
exhibit. There is a layout called Salesperson Detail, based on the Salesperson table occurrence, with a
portal showing Order records via the above relationship.
Which three statements are true? (Choose three.)
A. Deleting a Salesperson record also deletes all related Order records.
B. It is possible to create new Order records by importing data into the Salesperson table.
C. It is possible to create new Salesperson records by importing data into the Order table.
D. Users may create new Order records by entering data into the portal on the Salesperson Detail layout
E. It is possible to create a new Salesperson record using a Set Field [ ] script step in a script that runs in
the context of the Order table.
F. It is possible to create a new Salesperson record by typing into a related salesperson field displayed on
a layout that is based on the Order table.
Answer: DEF

FileMaker   FM0-301   FM0-301   FM0-301 examen

NO.16 You want to sort related records within a portal in a FileMaker Pro 7 database. What two methods
allow you to do this? (Choose two.)
A. select Sort by in the Edit Value List dialog
B. select Sort records in the Edit Relationship dialog
C. select Sort portal records in the Portal Setup dialog
D. select Sort records for the portal's table occurrence in the Specify Table dialog
E. select the Records>Sort Records... menu item, then select the portal's table occurrence in the Sort
Records dialog
Answer: BC

FileMaker examen   FM0-301   certification FM0-301   FM0-301 examen

NO.17 Consider a FileMaker Pro 7 database with the following tables and fields:
Using only Cartesian (cross or x ) relationships between occurrences of these tables, sorting if necessary,
which two actions can be performed? (Choose two.)
A. determine the mode of the order amount
B. determine the date of the most recent order
C. display all records from the Customer table in a portal
D. create a value list that shows all orders for a chosen customer
E. create a portal to show one record for each product that has ever been ordered
Answer: BC

FileMaker   certification FM0-301   FM0-301

NO.18 Consider the return delimited data in the Contact field of a FileMaker Pro 7 database are:
John Smith
Mary Jones
Julie Hyde
Which three formulas could be used to extract the string Mary Jones from Contact? (Choose three.)
A. Middle (Contact ; 12 ; 10)
B. MiddleValues (Contact ; 2)
C. MiddleWords (Contact ; 3 ; 2)
D. MiddleWords (Contact ; 3 ; 4)
E. MiddleValues (Contact ; 2 ; 1)
Answer: ACE

FileMaker   FM0-301 examen   FM0-301 examen   FM0-301   FM0-301

NO.19 Which statement is true in FileMaker Pro 7?
A. The Save record changes automatically layout option does not apply to users with [Full Access]
privileges.
B. On a layout by layout basis, you can specify whether record changes made in Browse mode will be
saved automatically.
C. On a layout by layout basis, you can specify whether changes made to the layout when exiting Layout
mode will be saved automatically.
D. If the Save record changes automatically option has been turned off for a layout, then users will be
prompted to save their changes only when exiting the layout.
Answer: B

certification FileMaker   FM0-301   FM0-301   FM0-301   FM0-301

NO.20 A number field in FileMaker Pro 7 called AmountPaid is set to auto-enter the following formula:.
The Do not replace existing value of field (if any) option is unchecked.
Which statement is true?
A. The calculation will only be evaluated the first time a value is entered into AmountPaid .
B. A user will not be able to manually edit the field once the calculation has been evaluated.
C. If the value in the AmountDue field is changed, the AmountPaid field will be re-evaluated.
D. The calculation will prevent a user from entering an incorrect value into the AmoundPaid field.
Answer: C

FileMaker examen   FM0-301   FM0-301   certification FM0-301

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel FileMaker FM0-301 peut vous assurer à réussir 100% le test FileMaker FM0-301. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Certification FileMaker de téléchargement gratuit pratique d'examen FM0-305, questions et réponses

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test FileMaker FM0-305 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test FileMaker FM0-305, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

On peut voir que beaucoup de candidats ratent le test FileMaker FM0-305 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test FileMaker FM0-305 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test FileMaker FM0-305, Pass4Test peut offrir les Q&As des autres test Certification IT.

Pass4Test est un seul site web qui peut offrir toutes les documentations de test FileMaker FM0-305. Ce ne sera pas un problème à réussir le test FileMaker FM0-305 si vous préparez le test avec notre guide d'étude.

Beaucoup de gens trouvent difficile à passer le test FileMaker FM0-305, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test FileMaker FM0-305 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test FileMaker FM0-305 juste avec la Q&A de FileMaker FM0-305 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Pass4Test a de formations plus nouvelles pour le test FileMaker FM0-305. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test FileMaker FM0-305 à tous les candidats qui nous choisissent. L'importance de Certification FileMaker FM0-305 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Code d'Examen: FM0-305
Nom d'Examen: FileMaker (Developer Essentials for FileMaker 11)
Questions et réponses: 115 Q&As

FM0-305 Démo gratuit à télécharger: http://www.pass4test.fr/FM0-305.html

NO.1 Given a text field myText that contains "<color>blue</color>", which formula extracts the word "blue"
from the field?
A. Filter (myText ; "color")
B. MiddleWords (myText ; 2)
C. PatternMatch (myText ; "blue")
D. Middle ( myText ; Position ( myText ; "blue" ; 1 ; 1 ) ;4)
Answer: D

FileMaker   certification FM0-305   certification FM0-305

NO.2 Consider a FileMaker Pro 11 database with the following tables and fields:
Assuming only the above relationships between table occurrences, using sorting if necessary, which two
actions can be performed? (Choose two.)
A. create a value list that shows all Invoices for a chosen Customer
B. create a value list on a Product layout which displays all Customers
C. find all of the Customers who have ever ordered a specific Product
D. create a portal to display each Product that has been ordered by a Customer
E. display all records from the Customer table in a portal on a layout for an Invoice Item record
Answer: BE

FileMaker   certification FM0-305   FM0-305

NO.3 Which statement is true about supplemental fields added to a table occurrence based on an External
ODBC Data Source that uses MySQL?
A. These fields may be indexed.
B. All non-text data types are converted to text.
C. These fields may only be of type Summary or Calculation.
D. These fields will be added to the table definitions within MySQL.
E. These fields will be lost if the schema of the MySQL table is changed and then the Sync button in the
FileMaker Pro Manage Database dialog is used.
Answer: C

FileMaker examen   FM0-305   FM0-305

NO.4 Which three FileMaker Pro 11 objects will display data contents even when unrelated to the current
layout's table occurrence? (Choose three.)
A. Merge variable
B. Indexed Timestamp field
C. A Text field from a shadow table
D. Globally stored Calculation field
E. Globally stored Number field placed in a portal
F. A Container field defined with the Store as reference only option enabled
Answer: ADE

FileMaker   FM0-305 examen   FM0-305 examen   certification FM0-305   FM0-305 examen

NO.5 Given the following relationship graph:
Without inspecting the data, what can be assumed about this database?
A. In the Event table, the Event ID has no index.
B. For each Task record there will be exactly one related Volunteer record.
C. Each record in the Task table will represent a unique combination of Volunteer ID and Event ID.
D. The relationship between Task and Event will not allow the Allow creation of records... nor the Delete
related records... settings to be enabled for the Event table.
Answer: A

FileMaker   FM0-305 examen   FM0-305 examen   certification FM0-305   FM0-305 examen   certification FM0-305

NO.6 Which three are directly selectable options in the Validation tab of the field options dialog in FileMaker
Pro 11? (Choose three.)
A. Existing value
B. Member of value list
C. Strict data type: Integer
D. Strict data type: Time of Day
E. Strict data type: Alphanumeric
F. Minimum number of characters
Answer: ABD

FileMaker   FM0-305 examen   certification FM0-305   FM0-305

NO.7 A table in a FileMaker Pro 11 database has a field CompanyName of type Text. The following field
validation options are set for this field:
Validate data in this field only during data entry
Allow user to override during data entry
Require not empty
Display custom message if validation fails
A user imports a set of records into this table. Some records have no value in the CompanyName field.
What will occur?
A. All of the records will be imported. No error message will be displayed.
B. The user will see the custom error message, but the import will continue if the user overrides the error.
C. All records with a value for CompanyName will be imported. The user will also see the specified
custom error message.
D. The user will see the custom error message, but in the case of an import, overriding the error is not
allowed and no records are imported.
E. All records with a value for CompanyName will be imported. The user will see an error dialog from the
FileMaker Pro application stating that some records could not be imported due to errors, along with a
count of those records.
Answer: A

FileMaker   FM0-305   certification FM0-305   FM0-305

NO.8 Consider two FileMaker files, Collection and Item, where tables from Item are included in the
Relationships Graph of Collection.
Which method will preserve all functionality in the Relationships Graph of Collection after renaming the
Item file to Artifact?
A. delete referenced Item table occurrences in the Relationships Graph for Collection and recreate them
for Artifact
B. click the Repair Reference button in the Relationships Graph for Collection and reset the file path
C. choose File > Manage > External Data Sources... for Collection and reset the file path
D. select referenced Item table occurrences in the Relationships Graph for Collection and right-click to
choose Rename File Source...
E. choose the File > Recover... menu in FileMaker Pro 11 Advanced, select the Collection file, then
choose Repair References under Advanced Recover Options
Answer: C

FileMaker examen   certification FM0-305   FM0-305 examen   FM0-305

NO.9 Which two features require indexing in order to work? (Choose two.)
A. List function
B. Dynamic subsummary reports
C. Auto-complete using existing values
D. Dynamic value lists based on FileMaker tables
E. Add Leading Group by <field name> in Table View
Answer: CD

certification FileMaker   FM0-305 examen   certification FM0-305   certification FM0-305

NO.10 What is the theoretical maximum record count in a FileMaker Pro 11 file?
A. 100 million records
B. 4 billion records
C. 8 trillion records
D. 64 quadrillion records
E. 128 quadrillion records
Answer: D

FileMaker examen   FM0-305   certification FM0-305   certification FM0-305   certification FM0-305

NO.11 What is the maximum number of recursive calls that can be made utilizing a custom function in
FileMaker Pro 11 Advanced?
A. 10,000
B. 32,000
C. 50,000
D. 64,000
Answer: C

FileMaker   FM0-305   FM0-305   FM0-305   FM0-305 examen

NO.12 What is the maximum number of files that can be hosted on FileMaker Server 11 Advanced?
A. 100
B. 125
C. 250
D. 999
Answer: B

certification FileMaker   certification FM0-305   FM0-305   FM0-305

NO.13 Which two statements are true about FileMaker Pro 11 relationships? (Choose two.)
A. A relationship defined with an X (cross product) will only include records with non-matching match field
values.
B. Valid relationships can include unindexed match fields.
C. The % (contains) operator can be used for join criteria that include one unindexed match field.
D. When editing match fields for a relationship, no more than 16 pairs of join criteria can be used.
E. A relationship defined with an X (cross product) match will allow the Delete related records in this table
when a record is deleted in the other table option.
Answer: BE

FileMaker   FM0-305 examen   FM0-305 examen

NO.14 Which two statements are true about field indexing in FileMaker Pro 11? (Choose two.)
A. Calculation fields cannot be indexed.
B. Indexing improves the speed at which sorts are performed.
C. To establish a relationship between two fields, both fields are required to be indexed.
D. A field must be indexed in order for Auto-complete using previously entered values to function.
E. Minimal indexing indicates that either the value index or the word index has been created, but not both.
Answer: DE

FileMaker   FM0-305 examen   FM0-305   certification FM0-305   FM0-305   FM0-305 examen

NO.15 A Text field called FirstLast in FileMaker Pro 11 is set to auto-enter the following formula:
FirstName & LastName.
FirstName and LastName are Text fields in the same table. The option Do not evaluate if all referenced
fields are empty is unchecked. The option Do not replace existing value of field (if any) is checked.
Under which two circumstances will the value of the calculation be inserted into the FirstLast field?
(Choose two.)
A. a record is first created
B. a user selects the menu item Records > Relookup Field Contents
C. each time the value of the FirstName or LastName field is modified
D. any field value on the record is modified and the FirstLast field is empty
E. the FirstName or LastName field is modified and the FirstLast field is empty
Answer: AE

FileMaker examen   FM0-305 examen   FM0-305   FM0-305   FM0-305

NO.16 Which script trigger could provide the functionality to prevent invalid data from being committed while
allowing the ability to revert the record?
A. OnObjectSave
B. OnObjectExit
C. OnObjectModify
D. OnObjectValidate
Answer: D

FileMaker examen   FM0-305 examen   certification FM0-305   FM0-305

NO.17 Given the following Relationships Graph for a FileMaker 11 database, where Employee, Manager, and
Trainer are all table occurrences sharing the same source table:
Assuming the relevant fields also exist in these tables, which two sets of data can be shown in portals
without modifying the graph? (Choose two.)
A. a portal of trainers that have taught their own manager
B. a portal of students that have not enrolled in a class
C. a portal showing a non-repeating list of courseware titles taught by a trainer
D. a portal of the classes that have been attended by a trainer's direct reports
E. a portal of classes in which a manager enrolled with one or more of the manager's direct reports
Answer: CD

FileMaker   FM0-305 examen   FM0-305   certification FM0-305

NO.18 Given a text field Full Name, Auto-Enter by Calculated value has been selected in field options, using
the following formula:
name First & " " & Name Last
The developer then disables (unchecks) the option Do not replace existing value of field (if any).
for which two cases will the results of the specified formula be inserted into the field Full Name? (Choose
two.)
A. when the record is first created
B. when the field Full Name itself is modified
C. only when the field Full Name was previously empty
D. when either of the fields Name First or Name Last are modified
E. when the field Full Name itself is modified and the record is committed
Answer: AD

certification FileMaker   FM0-305   FM0-305   certification FM0-305   certification FM0-305   FM0-305 examen

NO.19 Given the following relationship graph:
Without inspecting the data, what is known about this database?
A. There are no records in the Event table at this time.
B. The Event table occurrence references a table from an external ODBC data source.
C. There can be zero or one, but no more than one, Event record related to any Task record.
D. The corner arrows indicate all three table occurrences reference tables from external data sources.
E. From a layout based on the Event table occurrence, a portal could be drawn showing both related Task
and Volunteer data.
Answer: E

FileMaker   certification FM0-305   FM0-305   FM0-305

NO.20 A new database is created with two tables, Client and Contracts. The only modification made on the
Relationships Graph is to establish a relationship between them which is set to delete related records in
Contracts when a record in Client is deleted.
What happens when the Client table occurrence is deleted from the Relationships Graph?
A. Since it is the only occurrence of the Client table on the graph, it can not be deleted.
B. Any records in the Contracts table that were related to matching Client records are deleted.
C. The formula in the calculation field Name Full (defined as Name First & " " & Name Last) will be broken.
D. Any records in the Contracts table that were related to matching Client records will have values in the
Client ID field deleted.
Answer: C

FileMaker examen   FM0-305   FM0-305   certification FM0-305   certification FM0-305   certification FM0-305

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de FileMaker FM0-305 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

FileMaker FM1-306 examen pratique questions et réponses

Si vous vous inscriez le test FileMaker FM1-306, vous devez choisir une bonne Q&A. Le test FileMaker FM1-306 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Pass4Test peut offrir la facilité aux candidats qui préparent le test FileMaker FM1-306. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A FileMaker FM1-306 selon le résumé de test réel FileMaker FM1-306. Vous pouvez réussir le test à la première fois sans aucune doute.

Le test FileMaker FM1-306 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test FileMaker FM1-306. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Code d'Examen: FM1-306
Nom d'Examen: FileMaker (Developer Essentials for FileMaker 12 Beta Exam)
Questions et réponses: 198 Q&As

Pass4Test est un catalyseur de votre succès de test FileMaker FM1-306. En visant la Certification de FileMaker, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test FileMaker FM1-306, la Q&A FileMaker FM1-306 est un bon choix pour vous.

L'équipe de Pass4Test rehcerche la Q&A de test certification FileMaker FM1-306 en visant le test FileMaker FM1-306. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test FileMaker FM1-306 sans aucune doute.

Le programme de formation FileMaker FM1-306 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Selon les anciens test FileMaker FM1-306, la Q&A offerte par Pass4Test est bien liée avec le test réel.

FM1-306 Démo gratuit à télécharger: http://www.pass4test.fr/FM1-306.html

NO.1 Which statement is true given two FileMaker Pro 12 files, Vendors and Products, if a table
from Products appears on the Vendors Relationships Graph?
A. Scripts in Vendors can reference data from global variables defined in Products.
B. Layouts from Products can be displayed in the same window as layouts from Vendors.
C. Vendors can contain multiple valid external FileMaker Data Sources referencing Products.
D. A table occurrence from Products is required on the Vendors Relationships Graph in order to
call a script in Products from Vendors
Answer: C

certification FileMaker   FM1-306   FM1-306 examen

NO.2 Which extended privilege is required to connect to a hosted database from a FileMaker Go 12
client?
A. fmphp
B. fmapp
C. fmxml
D. fmios
E. fmiwp
F. fmxdbc
G. fmreauthenticate (n)
Answer: B

certification FileMaker   FM1-306 examen   FM1-306   FM1-306 examen

NO.3 A table in a FileMaker Pro 12 database has a text field CompanyName. The following field
validation options are set for this field:
-Validate data in this field only during data entry
-Allow user to override during data entry
-Require not empty
-Display custom message if validation fails
A user imports a set of records into this table. Some records have no value in the CompanyName
field. What will occur?
A. All of the records will be imported. No error message will be displayed.
B. The user will see the custom error message, but the import will continue if the user overrides
the error.
C. All records with a value for CompanyName will be imported. The user will see the specified
custom message.
D. All records with a value for CompanyName will be imported. The user will see an error dialog
from the FileMaker Pro application stating that some records could not be imported due to errors,
along with a count of those records.
Answer: A

FileMaker   FM1-306   certification FM1-306

NO.4 Which statement is true regarding resizing layout parts and objects in FileMaker Pro 12?
A. If no Autosizing anchors are set for any object in a layout part, the layout part will expand to fill
the window as it is resized, but all objects will maintain a constant distance from the center of the
layout part.
B. A body part with the top and bottom Autosizing anchors checked in the Inspector will expand or
contract its height in List View as the window is resized instead of changing the number of rows
displayed.
C. If a field in a tab panel has all four of its Autosizing anchors checked in the Inspector, and the
tab control has none, then the field can expand maximally to the edges of the tab panel as the
window is resized.
D. To set the layout part styles to expand or contract horizontally with window resizing, the gray
line defining the right edge of the layout can be selected enabling the Autosizing anchors to be set
in the Inspector.
E. If multiple fields in a portal and the portal itself all have their left and right Autosizing anchors
checked in the Inspector, then the fields will expand proportionally within the portal as the window
is resized horizontally.
Answer: A

certification FileMaker   FM1-306 examen   FM1-306 examen   certification FM1-306   FM1-306

NO.5 What is the minimal requirement to add an external FileMaker Data Source table occurrence
of
Inventory from a file called DEPT to the Relationships Graph of a file called PROD?
A. an active account associated with the [Full Access] privilege set in both PROD and DEPT
B. an active account associated with a privilege set that has the Manage External Data Sources
option checked in both PROD and DEPT
C. an active account associated with any privilege set in PROD, and an active account associated
with a privilege set that has view record access for the Inventory table
D. an active account in DEPT associated with a privilege set that has the Manage External Data
Sources option checked, and an active account with the [Full Access] privilege set in PROD
E. an active account associated with the [Full Access] privilege set in PROD and an active account
in DEPT associated with a privilege set that has view record access for the Inventory table
Answer: E

certification FileMaker   certification FM1-306   FM1-306   FM1-306

NO.6 Which two statements are true about overriding the default behavior of the Quick Find box
available in the Status Toolbar? (Choose two.)
A. The Perform Quick Find custom menu item must be installed.
B. The Show/Hide Quick Find script step will allow the user to hide the Ouick Find box.
C. The Get (QuickFindText) function will return the text entered into the Quick Find box.
D. The OnModeExit script trigger can be used to override a find request issued from the Ouick
Find box.
Answer: A,C

certification FileMaker   FM1-306 examen   FM1-306 examen

NO.7 Which statement is true about supplemental fields added to a table occurrence based on an
External ODBC Data Source that uses MySQL?
A. These fields may only be of type Summary or Calculation
B. These fields may be indexed unless they are of type Summary.
C. These fields will be added to the table definitions within MySQL when the Sync button in the
FileMaker Pro 12 Manage Database dialog is used.
D. These fields will be lost if the schema of the MySQL table is changed and then the Sync button
in the FileMaker Pro 12 Manage Database dialog is used.
Answer: A

FileMaker   FM1-306 examen   FM1-306   FM1-306

NO.8 A file has the following script specified for OnLastWindowClose:
Allow User Abort [Off]
Exit Script [Result; False]
Commit Records/Requests [No dialog]
Assume the Layout Setup dialog for the current layout is set to Save record changes
automatically. When a user attempts to close the file, what will be the result?
A. The file will close and the current record will be committed.
B. The file will close and the current record will not be committed.
C. The file will remain open and the current record will be committed.
D. The file will remain open and the current record will not be committed
Answer: C

certification FileMaker   FM1-306 examen   FM1-306 examen   FM1-306   certification FM1-306

NO.9 Which two statements are true about scripts in a hosted FileMaker Pro 12 file? (Choose two.)
A. Two users may not edit the same script simultaneously using the Manage Scripts dialog.
B. Scripts in the hosted file can only be scheduled for server-side execution if Run script with full
access privileges has been enabled.
C. If a script opens and edits a record, and does not commit the record, scripts run by other users
will be unable to edit data in that record until the record is committed.
D. A script can use Get (RecordAccess) before continuing execution to determine whether or not
the current record in the hosted file has been locked by another user.
Answer: A,C

FileMaker   FM1-306   FM1-306   FM1-306   FM1-306

Vous pouvez tout d'abord télécharger le démo FileMaker FM1-306 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Le meilleur matériel de formation examen FileMaker FM0-305

Pour réussir le test FileMaker FM0-305 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test FileMaker FM0-305. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test FileMaker FM0-305 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Pass4Test peut offrir nombreux de documentations aux candidats de test FileMaker FM0-305, et aider les candidats à réussir le test. Les marétiaux visés au test FileMaker FM0-305 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test FileMaker FM0-305 100%.

Vous n'avez besoin que de faire les exercices à propos du test FileMaker FM0-305 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Code d'Examen: FM0-305
Nom d'Examen: FileMaker (Developer Essentials for FileMaker 11)
Questions et réponses: 115 Q&As

Le programme de formation FileMaker FM0-305 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A FileMaker FM0-305 comme votre guide d'étude.

FM0-305 Démo gratuit à télécharger: http://www.pass4test.fr/FM0-305.html

NO.1 Given the following relationship graph:
Without inspecting the data, what is known about this database?
A. There are no records in the Event table at this time.
B. The Event table occurrence references a table from an external ODBC data source.
C. There can be zero or one, but no more than one, Event record related to any Task record.
D. The corner arrows indicate all three table occurrences reference tables from external data sources.
E. From a layout based on the Event table occurrence, a portal could be drawn showing both related Task
and Volunteer data.
Answer: E

certification FileMaker   FM0-305 examen   FM0-305   FM0-305   FM0-305 examen

NO.2 Given a text field myText that contains "<color>blue</color>", which formula extracts the word "blue"
from the field?
A. Filter (myText ; "color")
B. MiddleWords (myText ; 2)
C. PatternMatch (myText ; "blue")
D. Middle ( myText ; Position ( myText ; "blue" ; 1 ; 1 ) ;4)
Answer: D

FileMaker examen   certification FM0-305   FM0-305

NO.3 Consider a FileMaker Pro 11 database with the following tables and fields:
Assuming only the above relationships between table occurrences, using sorting if necessary, which two
actions can be performed? (Choose two.)
A. create a value list that shows all Invoices for a chosen Customer
B. create a value list on a Product layout which displays all Customers
C. find all of the Customers who have ever ordered a specific Product
D. create a portal to display each Product that has been ordered by a Customer
E. display all records from the Customer table in a portal on a layout for an Invoice Item record
Answer: BE

FileMaker examen   FM0-305   certification FM0-305

NO.4 Which two statements are true about FileMaker Pro 11 relationships? (Choose two.)
A. A relationship defined with an X (cross product) will only include records with non-matching match field
values.
B. Valid relationships can include unindexed match fields.
C. The % (contains) operator can be used for join criteria that include one unindexed match field.
D. When editing match fields for a relationship, no more than 16 pairs of join criteria can be used.
E. A relationship defined with an X (cross product) match will allow the Delete related records in this table
when a record is deleted in the other table option.
Answer: BE

FileMaker   FM0-305 examen   FM0-305   FM0-305 examen

NO.5 A new database is created with two tables, Client and Contracts. The only modification made on the
Relationships Graph is to establish a relationship between them which is set to delete related records in
Contracts when a record in Client is deleted.
What happens when the Client table occurrence is deleted from the Relationships Graph?
A. Since it is the only occurrence of the Client table on the graph, it can not be deleted.
B. Any records in the Contracts table that were related to matching Client records are deleted.
C. The formula in the calculation field Name Full (defined as Name First & " " & Name Last) will be broken.
D. Any records in the Contracts table that were related to matching Client records will have values in the
Client ID field deleted.
Answer: C

FileMaker examen   FM0-305   FM0-305   certification FM0-305

NO.6 A table in a FileMaker Pro 11 database has a field CompanyName of type Text. The following field
validation options are set for this field:
Validate data in this field only during data entry
Allow user to override during data entry
Require not empty
Display custom message if validation fails
A user imports a set of records into this table. Some records have no value in the CompanyName field.
What will occur?
A. All of the records will be imported. No error message will be displayed.
B. The user will see the custom error message, but the import will continue if the user overrides the error.
C. All records with a value for CompanyName will be imported. The user will also see the specified
custom error message.
D. The user will see the custom error message, but in the case of an import, overriding the error is not
allowed and no records are imported.
E. All records with a value for CompanyName will be imported. The user will see an error dialog from the
FileMaker Pro application stating that some records could not be imported due to errors, along with a
count of those records.
Answer: A

FileMaker   FM0-305 examen   certification FM0-305   FM0-305   FM0-305

NO.7 What is the theoretical maximum record count in a FileMaker Pro 11 file?
A. 100 million records
B. 4 billion records
C. 8 trillion records
D. 64 quadrillion records
E. 128 quadrillion records
Answer: D

FileMaker examen   FM0-305   FM0-305 examen

NO.8 Which script trigger could provide the functionality to prevent invalid data from being committed while
allowing the ability to revert the record?
A. OnObjectSave
B. OnObjectExit
C. OnObjectModify
D. OnObjectValidate
Answer: D

FileMaker   certification FM0-305   certification FM0-305   certification FM0-305   FM0-305 examen

NO.9 Given the following relationship graph:
Without inspecting the data, what can be assumed about this database?
A. In the Event table, the Event ID has no index.
B. For each Task record there will be exactly one related Volunteer record.
C. Each record in the Task table will represent a unique combination of Volunteer ID and Event ID.
D. The relationship between Task and Event will not allow the Allow creation of records... nor the Delete
related records... settings to be enabled for the Event table.
Answer: A

FileMaker   FM0-305 examen   certification FM0-305   FM0-305

NO.10 Given the following Relationships Graph for a FileMaker 11 database, where Employee, Manager, and
Trainer are all table occurrences sharing the same source table:
Assuming the relevant fields also exist in these tables, which two sets of data can be shown in portals
without modifying the graph? (Choose two.)
A. a portal of trainers that have taught their own manager
B. a portal of students that have not enrolled in a class
C. a portal showing a non-repeating list of courseware titles taught by a trainer
D. a portal of the classes that have been attended by a trainer's direct reports
E. a portal of classes in which a manager enrolled with one or more of the manager's direct reports
Answer: CD

FileMaker   FM0-305   FM0-305

NO.11 What is the maximum number of files that can be hosted on FileMaker Server 11 Advanced?
A. 100
B. 125
C. 250
D. 999
Answer: B

FileMaker   FM0-305 examen   FM0-305   FM0-305

NO.12 Consider two FileMaker files, Collection and Item, where tables from Item are included in the
Relationships Graph of Collection.
Which method will preserve all functionality in the Relationships Graph of Collection after renaming the
Item file to Artifact?
A. delete referenced Item table occurrences in the Relationships Graph for Collection and recreate them
for Artifact
B. click the Repair Reference button in the Relationships Graph for Collection and reset the file path
C. choose File > Manage > External Data Sources... for Collection and reset the file path
D. select referenced Item table occurrences in the Relationships Graph for Collection and right-click to
choose Rename File Source...
E. choose the File > Recover... menu in FileMaker Pro 11 Advanced, select the Collection file, then
choose Repair References under Advanced Recover Options
Answer: C

certification FileMaker   FM0-305 examen   FM0-305

NO.13 A Text field called FirstLast in FileMaker Pro 11 is set to auto-enter the following formula:
FirstName & LastName.
FirstName and LastName are Text fields in the same table. The option Do not evaluate if all referenced
fields are empty is unchecked. The option Do not replace existing value of field (if any) is checked.
Under which two circumstances will the value of the calculation be inserted into the FirstLast field?
(Choose two.)
A. a record is first created
B. a user selects the menu item Records > Relookup Field Contents
C. each time the value of the FirstName or LastName field is modified
D. any field value on the record is modified and the FirstLast field is empty
E. the FirstName or LastName field is modified and the FirstLast field is empty
Answer: AE

FileMaker   FM0-305 examen   certification FM0-305

NO.14 Given a text field Full Name, Auto-Enter by Calculated value has been selected in field options, using
the following formula:
name First & " " & Name Last
The developer then disables (unchecks) the option Do not replace existing value of field (if any).
for which two cases will the results of the specified formula be inserted into the field Full Name? (Choose
two.)
A. when the record is first created
B. when the field Full Name itself is modified
C. only when the field Full Name was previously empty
D. when either of the fields Name First or Name Last are modified
E. when the field Full Name itself is modified and the record is committed
Answer: AD

certification FileMaker   certification FM0-305   FM0-305   FM0-305 examen

NO.15 What is the maximum number of recursive calls that can be made utilizing a custom function in
FileMaker Pro 11 Advanced?
A. 10,000
B. 32,000
C. 50,000
D. 64,000
Answer: C

FileMaker   FM0-305   FM0-305 examen   FM0-305

NO.16 Which statement is true about supplemental fields added to a table occurrence based on an External
ODBC Data Source that uses MySQL?
A. These fields may be indexed.
B. All non-text data types are converted to text.
C. These fields may only be of type Summary or Calculation.
D. These fields will be added to the table definitions within MySQL.
E. These fields will be lost if the schema of the MySQL table is changed and then the Sync button in the
FileMaker Pro Manage Database dialog is used.
Answer: C

FileMaker   FM0-305   certification FM0-305

NO.17 Which three are directly selectable options in the Validation tab of the field options dialog in FileMaker
Pro 11? (Choose three.)
A. Existing value
B. Member of value list
C. Strict data type: Integer
D. Strict data type: Time of Day
E. Strict data type: Alphanumeric
F. Minimum number of characters
Answer: ABD

FileMaker examen   FM0-305 examen   FM0-305 examen   FM0-305 examen

NO.18 Which two features require indexing in order to work? (Choose two.)
A. List function
B. Dynamic subsummary reports
C. Auto-complete using existing values
D. Dynamic value lists based on FileMaker tables
E. Add Leading Group by <field name> in Table View
Answer: CD

FileMaker   FM0-305   FM0-305   FM0-305

NO.19 Which three FileMaker Pro 11 objects will display data contents even when unrelated to the current
layout's table occurrence? (Choose three.)
A. Merge variable
B. Indexed Timestamp field
C. A Text field from a shadow table
D. Globally stored Calculation field
E. Globally stored Number field placed in a portal
F. A Container field defined with the Store as reference only option enabled
Answer: ADE

FileMaker   certification FM0-305   FM0-305

NO.20 Which two statements are true about field indexing in FileMaker Pro 11? (Choose two.)
A. Calculation fields cannot be indexed.
B. Indexing improves the speed at which sorts are performed.
C. To establish a relationship between two fields, both fields are required to be indexed.
D. A field must be indexed in order for Auto-complete using previously entered values to function.
E. Minimal indexing indicates that either the value index or the word index has been created, but not both.
Answer: DE

FileMaker examen   FM0-305 examen   FM0-305 examen   FM0-305 examen

Pass4Test est un site à offrir particulièrement la Q&A FileMaker FM0-305, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification FileMaker FM0-305, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test FileMaker FM0-305 et même se renforcer vos connaissances professionnelles IT.