显示标签为“CTAL-TM_Syll2012”的博文。显示所有博文
显示标签为“CTAL-TM_Syll2012”的博文。显示所有博文

2014年8月5日星期二

Certification ISQI de téléchargement gratuit pratique d'examen CTAL-TM_UK CTAL-TTA_001 CTAL-TM_Syll2012, questions et réponses

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test ISQI CTAL-TM_UK est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification ISQI CTAL-TM_UK.

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test ISQI CTAL-TTA_001. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel ISQI CTAL-TTA_001 peut vous assurer à réussir 100% le test ISQI CTAL-TTA_001. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Code d'Examen: CTAL-TM_UK
Nom d'Examen: ISQI (ISTQB Certified Tester Advanced Level - Test Manager (CTAL-TM_UK))
Questions et réponses: 65 Q&As

Code d'Examen: CTAL-TTA_001
Nom d'Examen: ISQI (ISTQB Certified Tester Advanced Level - Technical Test Analyst (CTAL-TTA_001))
Questions et réponses: 65 Q&As

Code d'Examen: CTAL-TM_Syll2012
Nom d'Examen: ISQI (ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012])
Questions et réponses: 64 Q&As

Pass4Test est un catalyseur de votre succès de test ISQI CTAL-TM_UK. En visant la Certification de ISQI, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test ISQI CTAL-TM_UK, la Q&A ISQI CTAL-TM_UK est un bon choix pour vous.

Un bon choix de l'outil à se former est le point essentiel à passer le test ISQI CTAL-TM_UK, et les documentations à propos de rechercher le test ISQI CTAL-TM_UK est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

CTAL-TTA_001 Démo gratuit à télécharger: http://www.pass4test.fr/CTAL-TTA_001.html

NO.1 The application of multiple condition testing is also being considered.
Which specification-based technique is largely based on the principle of multiple condition testing?
1 credit [K2]
A. Equivalence Partitioning
B. State Transition Testing
C. Decision Table Testing
D. Use Cases
Answer: C

certification ISQI   CTAL-TTA_001 examen   certification CTAL-TTA_001

NO.2 Which TWO additional structure-based test design techniques could be used to dynamically
test the code? 1 credit [K2]
A. Condition testing
B. Multiple condition testing
C. Equivalence partitioning
D. Cause/effect graphing
E. Code reviews
Answer: A,B

ISQI   certification CTAL-TTA_001   CTAL-TTA_001 examen   CTAL-TTA_001 examen

NO.3 You have tested the program and have found that with "bonus" a boundary value has not
been implemented according to design. You have written an incident report. Which of the following
is the incident report of the highest quality? 2 credits [K3]
A. Description: Boundary value not correctly implemented Priority: High Repeatability: Yes Tester:
WVU Test case: 35 (test specification "bonus program"), V1.2
B. Description: Boundary value not correctly implemented for bonus Priority: Medium Tester: WVU
Test case: 35 (test specification "bonus program")
C. Description: Boundary value not correctly implemented for bonus (line 26: 10 according to design,
now 5 implemented) Priority: High Repeatability: Yes Tester: WVU Test case: 35 (test specification
"bonus program"), V1.2
D. Description: Boundary value not correctly implemented for bonus Priority: High Repeatability: Yes
Tester: WVU Test case: 35 (test specification "bonus program"), V1.2
Answer: C

ISQI examen   certification CTAL-TTA_001   certification CTAL-TTA_001

NO.4 What is the value of statement coverage achieved by test case 1 from test set A? 2 credits [K3]
A. ? 75% (21 / 28)
B. ? 78% (22 / 28)
C. ? 85% (24 / 28)
D. ? 90% (25 / 28)
Answer: A

certification ISQI   certification CTAL-TTA_001   certification CTAL-TTA_001   CTAL-TTA_001

NO.5 Which additional set of test cases is needed to achieve both 100% statement coverage and
100% decision coverage? 3 credits [K3]
A)
B)
C)
D)
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

ISQI   CTAL-TTA_001   CTAL-TTA_001   CTAL-TTA_001 examen

NO.6 How many test cases are needed to test code fragment lines 26 - 32 to achieve 100% condition
determination coverage? 2 credits [K3]
A. 2
B. 3
C. 4
D. 5
Answer: B

ISQI examen   CTAL-TTA_001 examen   certification CTAL-TTA_001   certification CTAL-TTA_001   CTAL-TTA_001 examen

NO.7 How many test cases are needed to test code fragment lines 26 - 32 to achieve 100% multiple
condition coverage? 2 credits [K3]
A. 2
B. 3
C. 4
D. 8
Answer: D

ISQI   certification CTAL-TTA_001   certification CTAL-TTA_001   certification CTAL-TTA_001

NO.8 The Bonus Program is perceived by management to be critical. Defects in the program would
almost immediately lead to financial loss. In the past an improvement program has been run to
implement review based on IEEE 1028. Knowledge and skills on both formal and informal reviews
are available. There is also an existing pool of review leaders. Which of the following review types
would you choose to review the program? 2 credits [K4]
A. Informal review
B. Inspection
C. Walkthrough
D. Management review
Answer: B

certification ISQI   CTAL-TTA_001   certification CTAL-TTA_001   certification CTAL-TTA_001

2013年12月10日星期二

Meilleur ISQI CTAL-TM_Syll2012 test formation guide

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test ISQI CTAL-TM_Syll2012. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Le Certificat ISQI CTAL-TM_Syll2012 est un passport rêvé par beaucoup de professionnels IT. Le test ISQI CTAL-TM_Syll2012 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test ISQI CTAL-TM_Syll2012. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test ISQI CTAL-TM_Syll2012 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A ISQI CTAL-TM_Syll2012 pour prendre un essai.

Dépenser assez de temps et d'argent pour réussir le test ISQI CTAL-TM_Syll2012 ne peut pas vous assurer à passer le test ISQI CTAL-TM_Syll2012 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification ISQI CTAL-TM_Syll2012. Les documentations particulièrement visée au test ISQI CTAL-TM_Syll2012 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test ISQI CTAL-TM_Syll2012.

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test ISQI CTAL-TM_Syll2012 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A ISQI CTAL-TM_Syll2012 comme votre guide d'étude.

Code d'Examen: CTAL-TM_Syll2012
Nom d'Examen: ISQI (ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012])
Questions et réponses: 64 Q&As

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification ISQI CTAL-TM_Syll2012, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test ISQI CTAL-TM_Syll2012.

CTAL-TM_Syll2012 Démo gratuit à télécharger: http://www.pass4test.fr/CTAL-TM_Syll2012.html

NO.1 The following are the exit criteria described in the test plan of a software product:
EX1. The test suite for the product must ensure that at least each quality risk item is covered by at
least one test case (a quality risk item can be covered by more test cases).
EX2. All test cases in the test suite must be run during the execution phase.
EX3. Defects are classified into two categories: "C" (critical defect) and "NC" (non-critical defect). No
known C defects shall exist in the product at the end of the test execution phase.
Which of the following information is useless when the specified exit criteria is evaluated?
K2 1 credit
A. A traceability matrix showing the relationships between the product risk items and the test cases
B. A list of all the open defects with the associated classification information extracted from the
defect tracking system
C. A chart, showing the trend in the lag time from defect reporting to resolution, extracted from the
defect tracking system
D. The execution status of all the test cases extracted from the test management tool
Answer: C

ISQI examen   CTAL-TM_Syll2012   CTAL-TM_Syll2012 examen

NO.2 Consider an information system of a Pay-Tv company based on a SOA architecture.
The integrated system currently consists of three core systems:
-a CRM (Customer Relationship Management) system
-a BRM (Billing and Revenue Management) system
-a CAS (Conditional Access System) system all of them communicating with SOA Middleware.
You have been asked to manage the testing activities for the integration of two additional
off-theshelf systems from two different vendors: a SMS (Short Message Service) server and an IVR
(Interactive Voice Response) system.
Assume that there is a high likelihood that the two off-the-shelf systems will be low-quality and that
you have a clear proof that the testing performed by the two vendors on their systems has been
unsystematic and unprofessional. This obviously leads to higher quality risk for the overall
integrated system.
You are the Test Manager of this project. Your main goal is to plan for testing activities to mitigate
this risk.
Which of the following answers best describes the test activities (assuming it is possible to perform
all of them) you should plan for?
K4 3 credits
A. You should plan for an informal and minimal acceptance test of the two off-the-shelf systems and
then a single end-to-end test of the overall integrated system
B. You should directly plan for a single end-to-end test focused on end-to-end tests of the overall
integrated system without an acceptance test of the two off-the-shelf systems
C. You should plan for two levels: a system integration test and an end-to-end test of the overall
integrated system
D. You should plan for adequate re-testing of both the systems followed by a system integration test
and an end-to-end test of the overall integrated system
Answer: D

ISQI   CTAL-TM_Syll2012   CTAL-TM_Syll2012   CTAL-TM_Syll2012 examen   certification CTAL-TM_Syll2012   CTAL-TM_Syll2012

NO.3 Assume you are the Test Manager for a new software release of an e-commerce application.
The server farm consists of six servers providing different capabilities. Each capability is provided
through a set of web services.
The requirements specification document contains several SLAs
(Service Level Agreements) like the following:
SLA-001: 99.5 percent of all transactions shall have a response time less than five seconds under a
load of up-to 5000 concurrent users
The main objective is to assure that all the SLAs specified in the requirements specification
document will be met before system release. You decide to apply a risk-based testing strategy and
an early risk analysis confirms that performance is high risk. You can count on a well-written
requirements specification and on a model of the system behavior under various load levels
produced by the system architect.
Which of the following test activities would you expect to be the less important ones to achieve the
test objectives in this scenario?
K4 3 credits
A. Perform unit performance testing for each single web service
B. Monitor the SLAs after the system has been released into the production environment
C. Perform system performance testing, consisting of several performance testing sessions, to verify
if all the SLAs have been met
D. Perform static performance testing by reviewing the architectural model of the system under
various load levels
Answer: B

certification ISQI   CTAL-TM_Syll2012   CTAL-TM_Syll2012 examen   CTAL-TM_Syll2012

NO.4 Which of the following is an example of the test closure activity indicated as "lessons learned"?
K2 1 credit
A. Archive all the test results of the acceptance testing phase
B. Deliver a list of the open defects of a software product released into production to the service
desk team
C. Participate in a meeting at the end of a project aimed at better managing the events and
problems of future projects
D. Deliver an automated regression test suite, used during the system test phase of a software
product released into production, to the team responsible for maintenance testing
Answer: C

ISQI examen   certification CTAL-TM_Syll2012   certification CTAL-TM_Syll2012   CTAL-TM_Syll2012

NO.5 The following are the requirements identified as "critical":
REQ-SEL-001. The user shall be able to combine all the three products with all the four durations to
define an item to purchase
REQ-SEL-002. The user shall be able to add a maximum of six different items to the shopping cart
REQ-PUR-001. The user shall be able to purchase all the items in the shopping cart using a credit
voucher
REQ-PUR-002. The user shall be able to purchase all the items in the shopping cart using the
available credit already charged on the smartcard
REQ-PUR-003. The user shall be able to purchase all the items in the shopping cart using all the
accepted credit cards (Visa, MasterCard and Great Wall Card)
REG-LOGO-001. The user shall be able to logout (by clicking the logout button) from both the
"select" and "purchase" pages going back to the "browse" page (anonymous navigation)
Moreover the following quality risk item has been identified as "critical":
QR-P1. The web customer portal might not be able to provide the expected response time (less than
10 sec) for the purchase transactions under a load of up-to 1000 concurrent users
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-01. Test the combinations of products and durations to define an item to purchase
TC-SEL-02. Test the maximum number of items, which can be added to the shopping cart
TC-PUR-01. Test the purchase of an item
TC-PUR-02. Test the purchase of an item with the credit charged on the smartcard
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?
K3 2 credits
A. 1
B. 2
C. 3
D. 4
Answer: C

ISQI   CTAL-TM_Syll2012 examen   CTAL-TM_Syll2012 examen   certification CTAL-TM_Syll2012   CTAL-TM_Syll2012 examen

NO.6 Which of the following statements describing the consequences of specifying test conditions
at a detailed level is NOT true?
K2 1 credit
A. In an environment where the test basis is continuously changing, it is recommended to specify
test conditions at a detailed level in order to achieve a better maintainability
B. The specification of test conditions at a detailed level can be effective when no formal
requirements or other development work products are available
C. The specification of test conditions at a detailed level can require the implementation of an
adequate level of formality across the team
D. For system testing, the specification of test conditions at a detailed level, carried out early in the
project as soon as the test basis is established, can contribute to defect prevention
Answer: A

ISQI   certification CTAL-TM_Syll2012   CTAL-TM_Syll2012   CTAL-TM_Syll2012

NO.7 You are the Test Manager for a project to develop a client-server application that allows wine
vendors to order custom-assorted packages of wines of several winemakers to sell special packages
in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the
system testinG.
EXCR1- Each "critical" quality risk item must be covered by at least one test condition
EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2bottles,
6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and
no more bottles than the package size. No error messages shall be displayed if the user selects a
valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid
number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card
data are given by the user
The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed to
get the number of bottles from the user Test analysis for system testing has just begun and the
following test conditions have been identified.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles
from the user
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?
K3 2 credits
A. 4
B. 3
C. 2
D. 1
Answer: A

ISQI   certification CTAL-TM_Syll2012   certification CTAL-TM_Syll2012   CTAL-TM_Syll2012 examen

NO.8 You are the Test Manager for a project to develop a client-server application that allows wine
vendors to order custom-assorted packages of wines of several winemakers to sell special packages
in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the
system testinG. EXCR1- Each "critical" quality risk item must be covered by at least one test
condition EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2bottles,
6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and
no more bottles than the package size. No error messages shall be displayed if the user selects a
valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid
number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card
data are given by the user
QUSTION NO: 11 The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed
to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order TC-CR-RSK-1. Test the accepted values from
the input field designed to get the number of bottles from the user
Assume that you have used traceability to determine the logical test cases that cover all the
requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the
REQSEL-4 requirement?
K3 2 credits
A. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are
displayed
B. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are displayed
C. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of bottles"
message is displayed
D. Select a 6-bottles package, then try to insert 7 bottles
Answer: C

ISQI   CTAL-TM_Syll2012 examen   CTAL-TM_Syll2012 examen   certification CTAL-TM_Syll2012

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification ISQI CTAL-TM_Syll2012. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test ISQI CTAL-TM_Syll2012. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.