Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Juniper JN0-101, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Juniper JN0-101 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.
Il demande les connaissances professionnelles pour passer le test Juniper JN0-101. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Juniper JN0-101, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Juniper JN0-101. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Juniper JN0-101. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Juniper JN0-101. Choisir le produit de Pass4Test particulier pour le test Certification Juniper JN0-101 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Code d'Examen: JN0-101
Nom d'Examen: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)
Questions et réponses: 190 Q&As
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Juniper JN0-101 dans Pass4Test pour se former avant le test Juniper JN0-101.
Obtenez la Q&A de test Juniper JN0-101 de Pass4Test plus tôt, vous pouvez réussir le test Certification Juniper JN0-101 plus tôt.
JN0-101 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-101.html
NO.1 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C
Juniper examen JN0-101 examen JN0-101 examen
NO.2 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD
Juniper certification JN0-101 JN0-101 certification JN0-101 JN0-101 examen
NO.3 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC
certification Juniper certification JN0-101 JN0-101 JN0-101 JN0-101 examen
NO.4 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C
Juniper certification JN0-101 JN0-101 examen JN0-101 examen certification JN0-101
NO.5 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A
Juniper JN0-101 examen certification JN0-101 certification JN0-101 JN0-101 JN0-101
NO.6 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB
Juniper JN0-101 examen JN0-101
NO.7 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B
certification Juniper certification JN0-101 JN0-101
NO.8 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A
Juniper examen certification JN0-101 JN0-101 JN0-101 examen JN0-101
NO.9 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A
Juniper JN0-101 examen JN0-101 JN0-101
NO.10 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD
Juniper JN0-101 JN0-101 JN0-101
NO.11 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD
Juniper examen JN0-101 JN0-101 examen JN0-101 examen
NO.12 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C
Juniper JN0-101 certification JN0-101 certification JN0-101 JN0-101
NO.13 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC
certification Juniper JN0-101 certification JN0-101 JN0-101 examen
NO.14 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D
certification Juniper JN0-101 JN0-101 examen
NO.15 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A
Juniper JN0-101 JN0-101
NO.16 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D
certification Juniper certification JN0-101 certification JN0-101 certification JN0-101
NO.17 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD
certification Juniper certification JN0-101 certification JN0-101 certification JN0-101
NO.18 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D
Juniper JN0-101 examen certification JN0-101 JN0-101 certification JN0-101 certification JN0-101
NO.19 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A
Juniper JN0-101 JN0-101 examen JN0-101 certification JN0-101 JN0-101 examen
NO.20 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D
Juniper JN0-101 examen JN0-101 examen JN0-101 examen
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
没有评论:
发表评论