Vous avez aussi la possibilité à réussir le test ISEB BH0-010. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
Code d'Examen: BH0-010
Nom d'Examen: ISEB (BCS Certified Tester Foundation Level 2011 syllabus)
Questions et réponses: 120 Q&As
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test ISEB BH0-010 à la première fois.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test ISEB BH0-010, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test ISEB BH0-010 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat ISEB BH0-010 sans aucune doute.
BH0-010 Démo gratuit à télécharger: http://www.pass4test.fr/BH0-010.html
NO.1 Which one of the following is true of software development models?
A. There are always four test levels in the V-model.
B. In a Rapid Application Development (RAD) project, there are four test levels for each iteration.
C. In Agile development models, the number of test levels for an iteration can vary depending on the
project.
D. There must be at least four test levels for any software development model.
Answer: C
ISEB BH0-010 certification BH0-010
NO.2 Which of the following is an example of a product risk?
A. Software that does not perform its intended functions
B. Failure of a third party
C. Problems in defining the right requirements
D. Skill and staff shortages
Answer: A
ISEB BH0-010 examen BH0-010 BH0-010
NO.3 Given the following decision table:
Which of the following test cases and expected results is VALID?
A. 23 year old in insurance class A Premium is 90 and excess is 2,500.
B. 51 year old in insurance class C Premium is 70 and excess is 500.
C. 31 year old in insurance class B Premium is 90 and excess is 2,500.
D. 43 year old in insurance class C Premium is 70 and excess is 1,000
Answer: A
ISEB BH0-010 BH0-010 examen
NO.4 Given the following state table:
Which of the following represents an INVALID transition (N)?
A. Off fromisplay Channel 1?
B. Channel 2 from Display Channel 1?
C. Stby from Live?
D. Channel 2 from Live?
Answer: A
ISEB BH0-010 certification BH0-010
NO.5 Which of the following statements are true in relation to component testing?
a) Stubs may be used.
b) May cover resource behaviour (e.g. memory leaks).
c) Tests the interactions between software components.
d) Defects are typically fixed without formally managing these defects.
A. a, c and d
B. a, b and d
C. b, c and d
D. a, b and c
Answer: B
ISEB certification BH0-010 certification BH0-010 BH0-010 BH0-010 examen
NO.6 Which of the following are structure-based techniques?
a) Decision table testing
b) Boundary value analysis
c) Multiple condition coverage
d) Use case testing
e) Decision testing
A. a and c.
B. b and d.
C. b and e.
D. c and e.
Answer: D
ISEB examen BH0-010 certification BH0-010 BH0-010 examen BH0-010 examen certification BH0-010
NO.7 A system specification states that a particular field should accept alphabetical characters in either upper
or lower case.
Which of the following test cases is from an INVALID equivalence partition?
A. Feeds
B. F33ds
C. FEEDS
D. fEEDs
Answer: B
ISEB BH0-010 examen BH0-010 certification BH0-010
NO.8 Which one of the following is a characteristic of good testing in any lifecycle model?
A. Each test level has the same test objective.
B. There should be more testing activities than development activities.
C. Test design can only begin when development is complete.
D. Testers should begin to review documents as soon as drafts are available.
Answer: D
ISEB BH0-010 BH0-010 examen BH0-010 BH0-010
NO.9 Which statement about combinations of inputs and preconditions is true for a large system?
A. It is easy to test them all in a short time
B. It is not practically possible to test them all
C. It is not possible to test any of them
D. It is essential to test them all in order to do good testing
Answer: B
ISEB certification BH0-010 certification BH0-010 BH0-010
NO.10 Given the following flow chart diagram:
What is the minimum number of test cases required for 100% statement coverage and 100% decision
coverage, respectively?
A. Statement Coverage = 1, Decision Coverage = 3.
B. Statement Coverage = 2, Decision Coverage = 3.
C. Statement Coverage = 2, Decision Coverage = 2.
D. Statement Coverage = 3, Decision Coverage = 3
Answer: C
ISEB BH0-010 examen certification BH0-010 BH0-010 examen certification BH0-010
NO.11 The flow graph below shows the logic of a program for which 100% statement coverage and 100%
decision coverage is required on exit from component testing.
The following test cases have been run:
* Test Case 1 covering path A, B, D, G
* Test Case 2 covering path A, B, D, E, F, E, F, E, F, E, G
* Test Case 3 covering path A, C, D, E, F, E, G
Which of the following statements related to coverage is correct?
A. Statement coverage is 100%; decision coverage is 100%.
B. Statement coverage is less than 100%; decision coverage is 100%.B.Statement coverage is less than
100%; decision coverage is 100%.
C. Statement coverage is 100%; decision coverage is less than 100%.C.Statement coverage is 100%;
decision coverage is less than 100%.
D. Statement coverage and decision coverage are both less than 100%.D.Statement coverage and
decision coverage are both less than 100%.
Answer: A
ISEB examen BH0-010 BH0-010 examen BH0-010
NO.12 Which tasks would USUALLY be performed by a test leader and which by the tester?
a) Adapt planning based on test results.
b) Create test specifications.
c) Plan tests.
d) Write or review a test strategy
A. c and d by the test leader; a and b by the tester
B. a and b by the test leader; c and d by the tester.
C. a and d by the test leader; b and c by the tester
D. a, c and d by the test leader; b by the tester.
Answer: D
ISEB BH0-010 BH0-010 examen BH0-010 BH0-010
NO.13 Which of the following activities should be performed during the selection and implementation of a
testing tool?
A. Determine whether the organisation existing test process needs to change.
B. Conduct a proof of concept.
C. Implement the selected tool on a project behind schedule to save time. d) Identify coaching and
mentoring requirements for the use of the selected tool
D. a, b and c.
Answer: D
certification ISEB BH0-010 BH0-010 examen BH0-010 BH0-010 examen certification BH0-010
NO.14 Which of the following is a purpose of the review kick off activity?
A. Explain the objectives
B. Select the personnel group
C. Document results
D. Define entry and exit criteria
Answer: A
ISEB certification BH0-010 BH0-010 examen
NO.15 Which of the following are characteristic of test management tools?
a) They support traceability of tests to source documents.
b) They provide an interface to test execution tools.
c) They help to enforce coding standards.
d) They manipulate databases and files to set up test data.
A. a and c
B. b and c
C. a and b
D. b and d
Answer: C
ISEB BH0-010 BH0-010 examen BH0-010 examen
NO.16 Pair the correct test design techniques (i to v) with the category of techniques (x, y and z):
i) Exploratory Testing
ii) Equivalence Partitioning
iii)Decision Testing
iv)Use Case Testing
v) Condition coverage
x) Specification-based
y) Structure-based
z) Experienced-based
A. x =i and ii; y = iii and v; z = iv.
B. x =i, ii and iv; y = v; z = iii
C. x = ii and iv; y = iii and v; z = i.
D. x = iii and iv; y = v; z = i and ii.
Answer: C
ISEB examen BH0-010 BH0-010
NO.17 A system under development contains complex calculations and decision logic, and it is assessed as
high risk because of the relative inexperience of the development team in the application domain. Which
of the following would be the MOST appropriate choice of test design technique for component testing?
A. Decision testing.
B. Statement testing
C. State transition testing
D. Equivalence partitioning
Answer: A
ISEB examen BH0-010 BH0-010 BH0-010 examen
NO.18 Four testers have each submitted an incident report in which each reported a problem with the User
log-on process. User log-on is a critical component of the system. The table below describes the four
defect reports submitted.
Which Tester has reported the incident MOST effectively, considering the information and priority they
have supplied?
A. Tester 3
B. Tester 1
C. Tester 2
D. Tester 4
Answer: D
ISEB BH0-010 examen BH0-010 BH0-010
NO.19 In which activity of the Fundamental Test Process is the test environment set up.
A. Test implementation and execution.
B. Test planning and control
C. Test analysis and design
D. Evaluating exit criteria and reporting
Answer: A
ISEB examen BH0-010 BH0-010 examen BH0-010 examen BH0-010
NO.20 Given the following sample of pseudo code:
01.Input number of male rabbits
02 Input number of female rabbits
03 If male rabbits > 0 and female rabbits > 0 then
04 Input Do you want to breed (Yes / No)
05 If breed = No
06 Print deep male and female rabbits apart
07 End if
08 End If.
Which of the following test cases will ensure that statement 6 is executed?
A. male rabbits = 1, female rabbits = 1, breed = Yes
B. male rabbits = 1, female rabbits = 1, breed = No
C. male rabbits = 1, female rabbits = 2, breed = Yes
D. male rabbits = 1, female rabbits = 0, breed = No
Answer: B
certification ISEB BH0-010 examen BH0-010 BH0-010 certification BH0-010
Est-ce que vous vous souciez encore pour passer le test ISEB BH0-010? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test ISEB BH0-010, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test ISEB BH0-010. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.
没有评论:
发表评论