Pass4Test offre une formation sur Microsoft 070-503 matériaux examen

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Microsoft 070-503 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Pass4Test a de formations plus nouvelles pour le test Microsoft 070-503. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Microsoft 070-503 à tous les candidats qui nous choisissent. L'importance de Certification Microsoft 070-503 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Microsoft 070-503. Cet outil de formation est convenable pour les candidats de test Microsoft 070-503. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Vous avez aussi la possibilité à réussir le test Microsoft 070-503. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Code d'Examen: 070-503

Nom d'Examen: Microsoft (TS: Microsoft .NET Framework 3.5 C Windows Communication Foundation)

Questions et réponses: 158 Q&As

070-503 Démo gratuit à télécharger: http://www.pass4test.fr/070-503.html

NO.1 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C

Microsoft   070-503   070-503   certification 070-503   070-503   070-503 examen

NO.2 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
<DataContract()> _
Public Class Person
...
End Class
<DataContract()> _
Public Class Customer
Inherits Person
...
End Class
You need to create a service contract that meets the following requirements:
The service contract must have an operation contract named GetPerson that returns an object of type
Person.
The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. <ServiceContract()> _
<ServiceKnownType("GetPerson")> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
B. <ServiceContract()> _
Public Interface IMyService
<OperationContract()> _
<ServiceKnownType("Customer")> _
Function GetPerson() As Person
End Interface
C. <ServiceContract()> _
<ServiceKnownType(GetType(Customer))> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
D. <ServiceContract()> _
<ServiceKnownType("GetPerson", GetType(Customer))> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
Answer: C

Microsoft   070-503   070-503

NO.3 You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
<ServiceContract(Name:="SvcOrder", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyService
<OperationContract()> _
Sub DoSomething()
End Interface
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. <ServiceContract(Namespace:="http: //contoso.com/services/V1")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
B. <ServiceContract(Name:="SvcOrder")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
C. <ServiceContract(Name:="SvcOrderV1", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
D. <ServiceContract(Name:="SvcOrder", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
Answer: D

Microsoft   070-503   certification 070-503

NO.4 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will contain an enumeration named OrderState.
The OrderState enumeration will contain the following four values:
Processing
Cancelled
Confirmed
Closed
The client application must be able to set the state of an Order entity to only the following two values:
Cancelled
Closed
You need to create the data contract for OrderState.
Which code segment should you use?
A. <DataContract()> _
Public Enum OrderState
Processing = 1
<DataMember()> _
Cancelled = 2
<DataMember()> _
Confirmed = 3
Closed = 4
End Enum
B. <DataContract()> _
Public Enum OrderState
Processing = 1
<EnumMember()> _
Cancelled = 2
Confirmed = 3
<EnumMember()> _
Closed = 4
End Enum
C. <DataContract()> _
Public Enum OrderState
<EnumMember(Value:="False")> _
Processing = 1
<EnumMember(Value:="True")> _
Cancelled = 2
<EnumMember(Value:="True")> _
Confirmed = 3
<EnumMember(Value:="False")> _
Closed = 4
End Enum
D. <DataContract()> _
Public Enum OrderState
<DataMember()> _
Processing = 1
<DataMember(IsRequired:=True)> _
Cancelled = 2
<DataMember()> _
Confirmed = 3
<DataMember(IsRequired:=True)> _
Closed = 4
End Enum
Answer: B

Microsoft   certification 070-503   070-503   070-503

NO.5 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process?name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process?name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process?name={name}")]
Answer: C

Microsoft   certification 070-503   certification 070-503   070-503   070-503   070-503

NO.6 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. Dim baseAddress As String = "http: //localhost:8000/ExamService"
Dim binding1 As New BasicHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
B. Dim baseAddress As String = _ "http: //localhost:8000/ExamService/service"
Dim binding1 As New BasicHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
C. Dim baseAddress As String = "http: //localhost:8000/ExamService"
Dim binding1 As New WSHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
D. Dim baseAddress As String = _
"http: //localhost:8000/ExamService/service"
Dim binding1 As New NetTcpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
Answer: B

Microsoft   certification 070-503   070-503 examen   070-503   070-503 examen   070-503

NO.7 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C

certification Microsoft   070-503   070-503 examen   070-503

NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will contain an enumeration named OrderState.
The OrderState enumeration will contain the following four values:
Processing
Cancelled
Confirmed
Closed
The client application must be able to set the state of an Order entity to only the following two values:
Cancelled
Closed
You need to create the data contract for OrderState.
Which code segment should you use?
A. [DataContract]
public enum OrderState
{
Processing=1,
[DataMember]
Cancelled=2,
[DataMember]
Confirmed=3,
Closed=4
}
B. [DataContract]
public enum OrderState
{
Processing=1,
[EnumMember]
Cancelled=2,
Confirmed=3,
[EnumMember]
Closed=4
}
C. [DataContract]
public enum OrderState
{
[EnumMember(Value="False")]
Processing=1,
[EnumMember(Value="True")]
Cancelled=2,
[EnumMember(Value="True")]
Confirmed=3,
[EnumMember(Value="False")]
Closed=4
}
D. [DataContract]
public enum OrderState
{
[DataMember]
Processing=1,
[DataMember(IsRequired=true)]
Cancelled=2,
[DataMember]
Confirmed=3,
[DataMember(IsRequired=true)]
Closed=4
}
Answer: B

Microsoft   070-503   070-503   070-503   070-503

NO.9 5. You have successfully defined a service contract named IManageOrders.
You write the following code segment.
Public Class OrderImpl
Implements IManageOrders
Public Sub MarkOrderClosed(ByVal orderId As Integer) _
Implements IManageOrders.MarkOrderClosed
Try
...
Catch ex As SqlException
Throw New FaultException(Of DataFault)( _
New DataFault())
End Try
End Sub
End Class
<DataContract()> _
Public Class DataFault
End Class
You need to create a fault contract for the MarkOrderClosed method on the IManageOrders service
contract.
Which code segment should you add?
A. <FaultContract(GetType(DataFault))>
B. <FaultContract(GetType(Exception))>
C. <FaultContract(GetType(SqlException))>
D. <FaultContract(GetType(FaultException))>
Answer: A

certification Microsoft   070-503   certification 070-503   070-503   070-503   certification 070-503
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder",
?Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D

Microsoft   certification 070-503   070-503   070-503   certification 070-503

NO.10 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service contains the following code segment.
<ServiceContract()> _
Public Interface IMyService
<OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.None)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
End Interface
You need to ensure that the DoSomething operation can participate in transactions.
Which code segment should you use to replace the existing operation contract?
A. <OperationContract( _
ProtectionLevel:=ProtectionLevel.None)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
B. <OperationContract( _
ProtectionLevel:=ProtectionLevel.EncryptAndSign)> _
<TransactionFlow(TransactionFlowOption.NotAllowed)> _
Sub DoSomething()
C. <OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.EncryptAndSign)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
D. <OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.Sign)> _
<TransactionFlow(TransactionFlowOption.Mandatory)> _
Sub DoSomething()
Answer: A

Microsoft   070-503 examen   070-503

NO.11 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B

Microsoft   070-503 examen   070-503   070-503   070-503   certification 070-503

NO.12 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B

Microsoft   070-503 examen   070-503   070-503

NO.13 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Public Interface IMyService
02
03 Function ProcessString(ByVal name As String) As String
04 End Interface
You create a host for the WCF service. You also create a service endpoint at http: //localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http: //localhost:8080/service/process?name=value
Which code segment should you insert at line 02?
A. <OperationContract(Name:="process", Action:="Get")> _
B. <OperationContract(Name:="process", Action:="Post")> _
C. <OperationContract()> _
<HttpTransferContract(Path:="process", Method:="Get")> _
D. <OperationContract()> _
<HttpTransferContract(Path:="process", Method:="Post")> _
Answer: C

Microsoft   070-503   certification 070-503

NO.14 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A

Microsoft   070-503   certification 070-503

NO.15 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework

NO.16 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. <OperationContract()> _
Sub UploadFile(ByVal xmlData As Stream)
B. <OperationContract()> _
Sub UploadFile(ByVal xmlData As XmlWriter)
C. <OperationContract()> _
Sub UploadFile(ByVal xmlData As StreamWriter)
D. <OperationContract()> _
Sub UploadFile(ByVal xmlData As Byte())
Answer: A

Microsoft examen   070-503   070-503

NO.17 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B

Microsoft examen   certification 070-503   certification 070-503   070-503   070-503   certification 070-503

NO.18 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. <ServiceContract()> _
Public Interface IOrderManager
<OperationContract(Action:="*")> _
Sub ProcessSimpleOrder()
<OperationContract()> _
Sub ProcessComplexOrder()
End Interface
B. <ServiceContract()> _
Public Interface IOrderManager
<OperationContract(Name:="http: //contoso.com/Simple")> _
Sub ProcessSimpleOrder()
<OperationContract(Name:="http: //contoso.com/Complex")> _
Sub ProcessComplexOrder()
End Interface
C. <ServiceContract()> _
Public Interface ISimpleOrderManager
<OperationContract()> _
Sub ProcessSimpleOrder()
End Interface
<ServiceContract()> _
Public Interface IComplexOrderManager
Inherits ISimpleOrderManager
<OperationContract()> _
Sub ProcessComplexOrder()
End Interface
D. <ServiceContract()> _
Public Interface ISimpleOrderManager
<OperationContract(Name:="http: //contoso.com/Simple")> _
Sub ProcessSimpleOrder()
End Interface
Public Interface IComplexOrderManager
Inherits ISimpleOrderManager
<OperationContract(Name:="http: //contoso.com/Complex")> _
Sub ProcessComplexOrder()
End Interface
Answer: C

Microsoft   070-503   070-503

NO.19 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. You have successfully defined a service contract named IManageOrders.
You write the following code segment.
public class OrderImpl : IManageOrders {
public void MarkOrderClosed(int orderId){
try {
...
}
catch (SqlException exc){
throw new FaultException<DataFault>(new DataFault());
}
}
}
[DataContract]
public class DataFault {
}
You need to create a fault contract for the MarkOrderClosed method on the IManageOrders service
contract.
Which code segment should you add?
A. [FaultContract(typeof(DataFault))]
B. [FaultContract(typeof(Exception))]
C. [FaultContract(typeof(SqlException))]
D. [FaultContract(typeof(FaultException))]
Answer: A

Microsoft   certification 070-503   070-503   070-503   070-503

NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 <ServiceContract(Namespace:="http://uri.contoso.com")> _
02 Public Interface IMyService
03 <OperationBehavior()> _
04 Function ProcessDetails(ByVal s As String) As String
05 <OperationContract(Action:="UpdateStatus")> _
06 Sub UpdateStatus()
07
08 End Interface
If the existing operation contract is unable to process a request made to the service, a generic operation
contract must attempt to process the request.
You need to create the generic operation contract.
Which code segment should you insert at line 07?
A. <OperationContract(Action:="*")> _
Sub ProcessOthers(ByVal msg As Message)
B. <OperationContract(Action:="*")> _
Sub ProcessOthers()
C. <OperationContract(Action:="Default")> _
Sub ProcessOthers(ByVal msg As Message)
D. <OperationContract(Action:="Default")> _
Sub ProcessOthers()
Answer: A

Microsoft   070-503   070-503 examen   certification 070-503

NO.21 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A

Microsoft   certification 070-503   certification 070-503   070-503

NO.22 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B

certification Microsoft   070-503   070-503   certification 070-503

NO.23 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. <Serializable()> _
Public Class Account
<XmlAttribute()> _
Public Id As String
<XmlElement()> _
Public Name As String
<XmlAttribute()> _
Public Currency As String
<XmlElement()> _
Public Balance As Double
End Class
B. <DataContract()> _
Public Class Account
<DataMember(Order:=0)> _
Public Id As String
<DataMember(Order:=1)> _
Public Name As String
<DataMember(Order:=0)> _
Public Balance As Double
<DataMember(Order:=1)> _
Public Currency As String
End Class
C. <Serializable()> _
Public Class Account
<XmlAttribute()> _
Public Id As String
Public Name As String
<XmlElement("Balance")> _
Public Balance As BalanceVal
End Class
<Serializable()> _
Public Class BalanceVal
<XmlText()> _
Public Amount As Double
<XmlAttribute()> _
Public Currency As String
End Class
D. <DataContract()> _
Public Class Account
<DataMember(Order:=0)> _
Public Id As String
<DataMember(Order:=1)> _
Public Name As String
<DataMember(Name:="Balance", Order:=2)> _
Public Balance As BalanceVal
End Class
<DataContract()> _
Public Structure BalanceVal
<DataMember(Order:=0)> _
Public Amount As Double
<DataMember(Order:=1)> _
Public Currency As String
End Structure
Answer: C

Microsoft   070-503 examen   certification 070-503   070-503   certification 070-503

NO.24 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
<ServiceContract()> _
Public Interface IMathService
<OperationContract()> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
End Interface
You have not deployed the IMathService service.
You need to expose the AddNumbers (a As Double, b As Double) As Double operation to the
IMathService service contract.
Which code segment should you use?
A. <OperationContract()> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract()> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
B. <OperationContract(Name:="AddInt")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Name:="AddDouble")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
C. <OperationContract(Action:="IMathService/AddInt")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Action:="IMathService/AddDouble")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
D. <OperationContract(Action:="AddInt/*")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Action:="AddDouble/*")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
Answer: B

certification Microsoft   070-503   070-503 examen   070-503 examen

NO.25 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Overrides Sub InitializeRuntime()
'Load configuration here
End Sub
End Class
B. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Overrides Sub ApplyConfiguration()
'Load configuration here
End Sub
End Class
C. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Shadows Sub InitializeDescription( _
ByVal serviceType As Type, _
ByVal baseAddresses As UriSchemeKeyedCollection)
'Load configuration here
End Sub
End Class
D. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Shadows Sub AddBaseAddresses(ByVal baseAddress As Uri)
'Load configuration here
End Sub
End Class
Answer: B

Microsoft   070-503   070-503 examen   certification 070-503   certification 070-503

NO.26 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. <MessageContract()> _
Public Class MyMessage
<MessageHeader()> _
Public Data() As String
End Class
B. <MessageContract()> _
Public Class MyMessage
<MessageHeaderArray()> _
Public Data() As String
End Class
C. <MessageContract()> _
Public Class MyMessage
<MessageProperty()> _
Public Data() As String
End Class
D. <MessageContract()> _
Public Class MyMessage
<MessageBodyMember(Order:=0)> _
Public Data() As String
End Class
Answer: A

certification Microsoft   070-503 examen   070-503 examen   070-503   070-503

NO.27 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service contains the following code segment.
[ServiceContract]
public interface IMyService
{
[OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.None)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
}
You need to ensure that the DoSomething operation can participate in transactions.
Which code segment should you use to replace the existing operation contract?
A. [OperationContract(ProtectionLevel=ProtectionLevel.None)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
B. [OperationContract(ProtectionLevel=
ProtectionLevel.EncryptAndSign)]
[TransactionFlow(TransactionFlowOption.NotAllowed)]
void DoSomething();
C. [OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.EncryptAndSign)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
D. [OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.Sign)]
[TransactionFlow(TransactionFlowOption.Mandatory)]
void DoSomething();
Answer: A

Microsoft   070-503 examen   070-503

NO.28 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(Namespace="http://uri.contoso.com")]
02 public interface IMyService
03 {
04 [OperationContract]
05 string ProcessDetails(string s);
06 [OperationContract(Action="UpdateStatus")]
07 void UpdateStatus();
08
09 }
If the existing operation contract is unable to process a request made to the service, a generic operation
contract must attempt to process the request.
You need to create the generic operation contract.
Which code segment should you insert at line 08?
A. [OperationContract(Action="*")]
void ProcessOthers(Message msg);
B. [OperationContract(Action="*")]
void ProcessOthers();
C. [OperationContract(Action="Default")]
void ProcessOthers(Message msg);
D. [OperationContract(Action="Default")]
void ProcessOthers();
Answer: A

Microsoft examen   070-503   070-503   certification 070-503

NO.29 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
The service contract must have an operation contract named GetPerson that returns an object of type
Person.
The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C

certification Microsoft   070-503 examen   certification 070-503

NO.30 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 <ServiceContract(SessionMode:=SessionMode.Required)> _
02 Public Interface IOrderManager
03
04 Sub CloseOrder()
05 End Interface
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 03?
A. <OperationContract(IsInitiating:=False)> _
B. <OperationContract(IsTerminating:=True)> _
C. <OperationContract()> _
<OperationBehavior( _
ReleaseInstanceMode:=ReleaseInstanceMode.AfterCall)> _
D. <OperationContract(IsTerminating:=False)> _
<OperationBehavior( _
ReleaseInstanceMode:=ReleaseInstanceMode.AfterCall)> _
Answer: B

Microsoft   070-503   070-503 examen

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Microsoft 070-503 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Meilleur Microsoft 70-576 test formation guide

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 70-576 juste avec la Q&A de Microsoft 70-576 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Vous n'avez besoin que de faire les exercices à propos du test Microsoft 70-576 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Le test Microsoft 70-576 est l'un très improtant dans tous les tests de Certification Microsoft, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Après une longue attente, les documentations de test Microsoft 70-576 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 70-576 à la première fois.

Code d'Examen: 70-576

Nom d'Examen: Microsoft (Designing and Developing Microsoft SharePoint 2010 Applications)

Questions et réponses: 172 Q&As

70-576 Démo gratuit à télécharger: http://www.pass4test.fr/70-576.html

NO.1 You are designing a SharePoint 2010 feature. The feature includes a feature receiver that executes
code on activation and deactivation. The feature receiver code interacts with a Web service, which could
cause errors beyond your control. You need to ensure that the feature does not activate or deactivate if
the Web service causes an error.
Which approach should you recommend.?
A. Wrap your code in a try-catch block. Log the error and issue another request to the Web service in the
catch block.
B. Wrap your code in a try-catch block. Log the error and throw an exception in the catch block.
C. Wrap your code in a try-catch block. Only catch exceptions of type SPException.
D. Wrap your code in a try-finally block. Log any issues your code encounters in the finally block.
Answer: B

Microsoft   70-576 examen   certification 70-576   70-576

NO.2 You are designing an asset management solution using SharePoint 2010. You need to design a
solution that meets the following requirements:
Binary large objects (BLOBs) cannot be stored in Microsoft SQL Server.
.There can be no custom development or third-party products.
Which approach should you recommend?
A. Install and configure Remote BLOB Storage and enable the content databases to use Remote BLOB
Storage.
B. Install and configure Remote BLOB Storage and enable the configuration databases to use Remote
BLOB Storage.
C. Install and configure an external BLOB store provider and enable the content databases to use the
external BLOB store provider.
D. Install and configure an external BLOB store provider and enable the configuration databases to use
the external BLOB store provider.
Answer: A

certification Microsoft   certification 70-576   70-576

NO.3 You are designing a SharePoint 2010 application to store 50 GB of digital assets, including audio and
video files that are up to 20 MB in size. You have the following requirements:
The disk storage system must use standard hard drives and must be configured to optimize read
performance.
.The SharePoint 2010 database uses Microsoft SQL Server Express 2008.
.The application must leverage standard SharePoint 2010 components to limit the requirement for custom
development.
You need to design a storage solution that meets all of these requirements. Which approach should you
recommend?
A. Enable FILESTREAM storage for a Microsoft SQL Server Express 2008 database on a RAID 0 disk
system.
Then install and configure remote Binary Large Object (BLOB) storage in SharePoint 2010.
B. Store the assets directly in Microsoft SQL Server Express 2008 and create multiple content databases
on a RAID 0 disk system.
C. Install and configure support for external BLOB storage for SharePoint 2010 and use the
ISPExternalBinaryProvider interface to manage files on a RAID 0 disk system.
D. Install and configure support for external BLOB storage for SharePoint 2010 and configure a Microsoft
SQL
Server Express 2008 database to store BLOBs on a RAID 5 disk system.
Answer: A

certification Microsoft   70-576   70-576   70-576

NO.4 You are designing a SharePoint 2010 site. You need to design the site to meet all the following
requirements:
Your business requires a consistent structure to manage sales proposal documents across all account
teams.
.The sales director must ensure that all sales documents conform to the same template.
.All sales proposals must be reviewed and approved by the sales manager.
.Every site must be created with a document library, a list of the account team members, and the account
status.
Which approach should you recommend?
A. Design a site template with a standard list of account team members and a shared document library to
hold the proposal documents.
B. Design a proposal content type to store proposal document metadata and a shared document library to
hold the proposal documents.
C. Design a proposal content type to include required metadata information about the proposal
documents. Also design a site template with a standard document library and account team members list
for consistency across all account teams.
D. Design a content type that uses a Microsoft Word template for proposal documents. The content type
includes required metadata. Also design a site template with a customized document library and list for
consistency across all account teams.
Answer: D

certification Microsoft   70-576 examen   70-576   70-576

NO.5 You are designing a solution that includes a custom list on a SharePoint 2010 site. You need to design
the solution to meet the following requirements:
The solution needs to add customized files to the site as part of the list provisioning.
.The list should only be provisioned in the sites of the site collection where it is specifically needed.
.The files must no longer remain provisioned in the site if the custom list is removed.
Which approach should you take?
A. Design a custom list. Implement list event receivers to add the custom files to the bin directory of the
Web application.
B. Design a custom feature solution. Implement feature event receivers on the Activate action to add files
to the site.
C. Design a custom feature solution. Implement feature event receivers on these two actions:
Install action to add files
Uninstall action to delete the files that were added during installation of the feature
D. Design a custom feature solution. Implement feature event receivers on these two actions:
Activate action to add the files
Deactivate action to delete the files that were added during activation of the feature
Answer: D

Microsoft   70-576 examen   70-576 examen

NO.6 You are designing a SharePoint 2010 application. You need to ensure that a custom list named Phone
Numbers is automatically created and added to the site whenever a new Team Site is created. Which
approach should you recommend?
A. Create a feature that defines a Phone Numbers list template. Then activate the feature on the team
site.
B. Create a feature that defines a Phone Numbers list template. Then use feature stapling to associate
the feature with the site definition of the team site.
C. Create the custom Phone Numbers List Template element and add the List Template element to the
onet.xml file of the team site.
D. Create the custom fields, views, and other specifications for the Phone Numbers list definition and add
them to the schema.xml file.
Answer: B

Microsoft examen   70-576   70-576   70-576 examen   70-576

NO.7 You are designing a SharePoint 2010 information architecture plan for a client that specifies the
mechanics of implementing content type change control. The requirements for the change control plan
specify that:
Site managers can create site-specific content types based on the content types in the parent site.
.Content types must not be overwritten when changes are made to parent site content types.
.Site managers can change child site content types.
You need to specify a content type change control plan that meets all these requirements. Which
approach should you recommend?
A. Direct the site manager to explicitly set the read-only property of the content type to true. Direct the site
collection manager to make the specified change required in the child site to the content type at the site
collection level.
B. Direct the site manager to explicitly set the read-only property of the content type to true. Perform a
push-down operation from the parent site to overwrite the required changes to the read-only content types
in all the child sites.
C. Define the content type as read-only at the child site level. Direct the site manager to explicitly set the
readonly property of the content type to false to make changes to the content type. Then change the
read-only property to true.
D. Define the content type as sealed. Direct the site manager to explicitly set the sealed property of the
content type to false to make changes to the content type. Then change the sealed property of the
content type to true.
Answer: C

Microsoft   70-576   70-576 examen   70-576   70-576   70-576

NO.8 You need to specify the correct artifacts to use in a SharePoint 2010 application for a school district.
The school district ¯ s ad m i n i s tr a t o r needs t o be ab l e t o sea r ch f o
student information on an intranet
SharePoint 2010 portal.
Student information is currently available in another database, which supports an Open Database
Connectivity(ODBC) driver. You need to design the solution to meet the following requirements:
Provide a user interface to search for a student based on name.
.Enable the administrator to select the correct student name from the search results.
.Provide a student header section that displays the primary student identity information, which will enable
the administrator to correlate any new information with the correct student.
.Provide additional data entry pages to add or update additional student information.
Which approach should you recommend?
A. Design HTML Web pages to render the student details. Install these pages under the
/templates/_layouts/1033 folder and load these pages in Web Parts.
B. Design connected Web Parts to share information among search data entry, student header
information, and new data entry information Web Parts.
C. Design a user control and load this control in a Web Part to search for a student. Then render the
student details in a SharePoint page.
D. Design a Web Part to search for a student. Then render the student record details in a SharePoint
page.
Answer: B

Microsoft   70-576   70-576

NO.9 You are designing a SharePoint 2010 application that includes a Task list. You have the following
requirements:
For each task, allow users to specify one of three values for an item named Phase using a drop-down
menu.
.Allow contributors to add new values for the Phase item. You need to design this application without
using custom code. Which approach should you recommend?
A. Create a Multiple lines of text field type on the Task list.
B. Create a Single line of text field type on the Task list.
C. Create a Choice field type on the Task list that gets values from a custom list.
D. Create a Lookup field type on the Task list that gets values from a custom list.
Answer: D

Microsoft   70-576 examen   70-576   70-576 examen   70-576 examen   70-576

NO.10 You are designing a SharePoint 2010 solution to manage statements of work. You need to design the
solution according to the following requirements:
Store the customer ID, purchase order number, estimated completion date, and other fields associated
with specific documents as they are uploaded.
.The information must be created so that it can be set within the Microsoft Word document information
panel.
.Programmatically execute a series of tasks, including assigning tasks to validate the information and
creating team sites, based on information related to each document.
.These tasks must run to completion, even if the server is rebooted.
Which approach should you recommend?
A. Create a document library for a custom content type that contains site columns for the document
information.
Develop a SharePoint workflow for the document library to execute the document tasks.
B. Create a document library for a custom content type that contains site columns for the document
information.
Develop an event receiver for the document library to execute the document tasks.
C. Create a custom list with fields to store the additional items and an attached document. Develop a
SharePoint workflow for the custom list to execute the additional tasks.
D. Create a custom list with fields to store the additional items and an attached document. Develop an
event receiver for the custom list to execute the additional tasks.
Answer: A

Microsoft   70-576 examen   70-576   certification 70-576

NO.11 You are helping an organization ¯ s execu ti ve t ea m t o des i gn an au t o m a t d approval process to
standardize certain documents. You have the following requirements:
The documents must be reviewed and approved by multiple teams in the approval chain.
.Each reviewer must provide feedback as part of completing a review.
.Each reviewer must either approve or reject the documents.
.After review, the document status must be changed; an e-mail must be generated to the document author
and the next reviewer in the approval chain; and a task should be created for the next reviewer in the
approval chain.
You must design a custom workflow solution for the document approval process on a SharePoint 2010
site. What should the solution include?
A. An initiation form to collect the reviewer ¯ s f eedback and a S i m p l e ac ti v it y t o app r ove and r e j ec t t e
document
B. An association form to collect the reviewer ¯ s f eedback and a C o m pos it e ac ti v it y t o suppo rt cond iti ona l
activities such as approval and rejection
C. A task form to collect the reviewer ¯ s f eedback and a C o m pos it e ac ti v it y t o suppo rt cond iti ona
activities
such as approval and rejection
D. A task form to collect the reviewer ¯ s f eedback and a S i m p l e ac ti v it y t o app r ove and r e j ec t t he docu m en
Answer: C

Microsoft   70-576   70-576 examen   certification 70-576   70-576   70-576 examen

NO.12 You are designing a SharePoint 2010 solution that allows users to enter address information for
contacts into a list named Address. You have the following requirements:
Ensure that users enter full nine-digit zip codes for the address information.
.Display a custom message indicating that a zip code is invalid if the entered zip code does not match the
full nine-digit requirements. You need to ensure that the application is designed to meet these
requirements.
Which approach should you recommend?
A. Create a custom command.
B. Create a Datasheet view on the Address list.
C. Use the Form Options of the Address list.
D. Create a formula on the column.
Answer: D

Microsoft   70-576   70-576

NO.13 You are designing an external binary large object (BLOB) store provider by implementing the ISP
External Binary Provider interface. The farm has existing sites that contain content. Your implementation
has been verified to be working correctly. You need to ensure that content within existing sites is moved
using the external BLOB store provider.
You also must ensure that the solution does not require further custom coding. Which approach should
you recommend?
A. Perform a backup and restore on each site.
B. Perform a backup and restore of each content database.
C. Perform a backup and restore on each site collection.
D. Perform a backup and restore of the configuration database.
Answer: C

Microsoft   70-576   70-576 examen   70-576 examen

NO.14 You are designing a custom SharePoint 2010 solution package. It will include a feature that contains a
Web Part,which requires a custom assembly for its functionality. You need to design the feature based on
the following requirements:
The Web Part must be a partial trust application and support a custom Code Access Security (CAS)
policy.
.The solution package must be deployed without the need of farm-level administrator permissions.
Which approach should you recommend?
A. Create the Web Part feature and deploy the required assembly to the bin directory of only the Web
applications that require it. Then delegate administration to the site administrator. Lastly, create a custom
CAS policy file and point to it the web.config file of the application.
B. Create the Web Part feature assembly with a strong name and deploy it using a .wsp file to the
_app_bin directory of all Web applications where it is needed. Then activate it using delegated
administration.
C. Create an assembly with a strong name and deploy it to the global assembly cache at the farm level.
Activate the feature at the site collection level with delegated administration.
D. Create the Web Part feature as a sandboxed solution.
Answer: D

certification Microsoft   certification 70-576   70-576   70-576 examen

NO.15 You are designing a SharePoint 2010 solution. You need to design the solution to meet the following
requirements:
All sites must have a consistent structure when initially created.
.All sites must include a document library that contains Word documents with searchable properties.
.Site users must be able to generate a spreadsheet detailing the properties of the document library
contents.
Which approach should you recommend?
A. Create a feature to create the required site structure programmatically. Create a content type for the
document library. Create a custom workflow for the document library to allow users to generate the
spreadsheet.
B. Create a feature to create the required site structure programmatically. Use feature stapling to
associate the feature with all site definitions. Create a custom action for the standard document library to
allow users to generate the spreadsheet.
C. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom action for the document library to allow users to
generate the spreadsheet.
D. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom event receiver to allow users to generate the
spreadsheet.
Answer: C

Microsoft   70-576   70-576   70-576

NO.16 A SharePoint 2010 server farm has a custom feature installed that provides specialized business logic
for a SharePoint solution package. The solution package is being updated to include additional
functionality. Your job is to specify a deployment method for the updates that will:
Add the additional application business logic to the solution package.
.Provide the least downtime for the application.
.Automate the application upgrade a much as possible.
You need to update the solution package with additional business logic and meet all these requirements.
Which
approach should you recommend?
A. Create a new feature containing the new business logic. Use the feature upgrade process to deploy the
solution package by incrementing the version number of the feature in the Feature.xml file.
B. Add the new business logic to the existing feature. Use the feature upgrade process to deploy the
solution package by incrementing the version number of the feature in the Feature.xml file.
C. Use Visual Studio 2010 to add the new business logic to the existing code in the .wsp package for the
feature.
Create two timer jobs - one to retract the current solution package and one to deploy the solution package
with the updated feature.
D. Use the object model to create a custom feature receiver to increment the version property of the
SPFeatureDefinition class. Increment the version number of the current solution in the Feature.xml file.
Answer: B

Microsoft   70-576 examen   70-576   70-576   70-576

NO.17 You are designing a SharePoint 2010 solution that stores employee information in a list named
Employees and company information in a list named Company. Each company has one or more
employees. You need to recommend that a developer add a new column so that a one-to-many
relationship is created between the Company list and Employees list. Which approach should you
recommend?
A. Add an External Data column on the Employees list.
B. Add a Lookup column on the Employees list.
C. Add a Managed Metadata column on the Company list.
D. Add a Lookup column on the Company list.
Answer: B

Microsoft examen   70-576 examen   certification 70-576   70-576 examen   certification 70-576

NO.18 You are designing a SharePoint 2010 solution for a large sales force. You have the following
requirements:
Each sales region must have its own site within the solution with lists to track the current sales data of the
sales executives.
.These lists must contain information about the status of sales opportunities, the estimated price, the
expected close date, and contact information for the potential sale.
.The welcome page for the root site must display a current summary for all regions, including the
percentage of sales expected to close within the next month and total expected revenue over time. You
need to design the solution to meet all these requirements. What approach should you recommend?
A. Create site columns from the Managed Metadata Services feature within Central Administration to
specify and display the sales information on the root site.
B. Create an event receiver for each list to copy the list data when an item is inserted into a list on the root
site.
Create a List View Web Part to display the sales information on the root site.
C. Create a content type for the metadata to be tracked. Use a Content Query Web Part to display the
sales information on the root site.
D. Create a custom workflow to manage the list item data and update properties on the Web Part to
display the sales information on the root site.
Answer: C

Microsoft examen   70-576   certification 70-576   70-576

NO.19 You are designing a SharePoint 2010 application that stores information about each machine in a
factory. This information includes an inventory of parts, the machine ¯ s m a i n t enance h i s t o ry , and a
document library of repair manuals for each machine in Microsoft Word format. The application must:
Establish links between the factory machine data, the machine part inventory, the maintenance history,
and the repair manuals to allow the display of additional fields from the other lists.
.Enforce relational integrity between the data to create custom views for various business users.
.Allow nontechnical users to update the individual list data and views, as well as to update the manuals.
.Enforce relationships that allow cascade deletes of items from the machine parts list when items are
deleted from the machine list, but prevent data in the machine parts list from being orphaned. You need to
design a data access plan that meets all these requirements and allows all data to be managed within the
SharePoint 2010 system.
Which plan should you recommend?
A. Create tables in Microsoft SQL Server for each set of inventories. Create relationships with primary and
foreign keys linking the tables. Use Business Connectivity Services (BCS) to connect SharePoint 2010
lists to these tables to manage the data.
B. Create tables in Microsoft SQL Server for each set of inventories. Create relationships with primary and
foreign keys linking the tables. Store machine part manuals in a Share Point document library and use
event receivers to synchronize data in the lists and libraries.
C. Use SharePoint 2010 lists and document libraries to store data. Create relationships using lookup
fields and relationship joins between the lists and document libraries.
D. Use SharePoint 2010 lists and document libraries to store data. Create a custom workflow to update
information in the lists and document libraries.
Answer: C

Microsoft examen   70-576   70-576   70-576 examen   70-576 examen

NO.20 You are using Business Connectivity Services to design a SharePoint 2010 application that connects to
an external database.The database users have accounts for authentication that are different from their
Active Directory accounts. You have a requirement to allow users to connect to the external database
without prompting
the user for credentials. You need to store user credentials and use these credentials when connecting to
the external database. Which approach should you recommend?
A. Create a target application that uses the Microsoft Single Sign-On Service. Select the Connect with
Impersonated Custom Identity option when creating the connection to the database.
B. Create a target application that uses the Secure Store Service. Select the Connect with Impersonated
Custom Identity option when creating the connection to the database.
C. Create a target application that uses the Single Sign-On Service. Select the Connect with User ¯ s
Identity option when creating the connection to the database.
D. Create a target application that uses the Secure Store Service. Select the Connect with User ¯ s I den tit y
option when creating the connection to the database.
Answer: B

certification Microsoft   certification 70-576   70-576

Le test de Certification Microsoft 70-576 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Certification Microsoft de téléchargement gratuit pratique d'examen MB7-849, questions et réponses

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Microsoft MB7-849. Pass4Test a une expérience riche pour répondre les demandes des candidats.

La Q&A Microsoft MB7-849 de Pass4Test est liée bien avec le test réel de Microsoft MB7-849. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Microsoft MB7-849 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Pass4Test est un catalyseur de votre succès de test Microsoft MB7-849. En visant la Certification de Microsoft, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Microsoft MB7-849, la Q&A Microsoft MB7-849 est un bon choix pour vous.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Code d'Examen: MB7-849

Nom d'Examen: Microsoft (NAV 2009 Manufacturing)

Questions et réponses: 65 Q&As

MB7-849 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-849.html

NO.1 You are the consultant on a Microsoft Dynamics NAV 2009 implementation.
Your client is setting up Item Cards. In the Flushing Method field, the available options are Manual,
Forward, and Backward. Your client asks you to explain how material is consumed when forward flushing
is selected and routing link codes are not used.
What explanation do you provide to your client?
A. The Consumption Journal is used to specify how much material is consumed for a production order.
B. The actual quantity of material is automatically consumed at the finish of a production order.
C. The expected quantity of material is automatically consumed at the release of a production order.
D. The expected quantity of material is automatically consumed when the Output Journal is posted.
Answer: C

certification Microsoft   MB7-849   certification MB7-849   MB7-849

NO.2 When the Location Mandatory check box is selected in Inventory Setup, what other setup is necessary
for planning to be accurate?
A. A stockkeeping unit must be set up for each location where an item is planned.
B. The planning worksheet must be set up for processing on a location basis.
C. Item Cards must have the Location Code field populated.
D. The Planning check box must be selected for the appropriate posting groups in Inventory Posting
Setup.
Answer: A

Microsoft examen   MB7-849   MB7-849   MB7-849

NO.3 You are the consultant on a Microsoft Dynamics NAV 2009 implementation.
You are reviewing Manufacturing Setup, explaining the purpose of the various fields to your client.
What explanation do you provide for the use of the Dampener (Time) and Dampener (% of Lot Size)
fields?
A. They limit Move suggestions for routing a Released Production Order.
B. They limit Setup Time on a Released Production Order when the Refresh function is executed.
C. They limit Action Messages when a plan is executed in Microsoft Dynamics NAV.
D. They limit the production orders to include when a plan is executed in Microsoft Dynamics NAV.
Answer: C

certification Microsoft   MB7-849   MB7-849 examen

NO.4 A planner is running a regenerative plan for MPS only. What type of demand will influence the output?
A. Sales orders, forecast entries, and blanket orders
B. Customer orders and components needed
C. Sales orders only
D. Forecast, sales orders, and components needed
Answer: A

Microsoft examen   MB7-849   MB7-849   MB7-849

NO.5 What status codes are available for production orders?
A. Simulated, Planned, Released, Finished
B. Planned, Firm Planned, Released, Finished
C. Simulated, Planned, Firm Planned, Released, Finished
D. Simulated, Planned, Firm Planned, Released, Completed
Answer: C

Microsoft   certification MB7-849   MB7-849 examen   MB7-849

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

Dernières Microsoft 70-512 de la pratique de l'examen questions et réponses téléchargement gratuit

La Q&A Microsoft 70-512 de Pass4Test est liée bien avec le test réel de Microsoft 70-512. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Microsoft 70-512 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

On doit faire un bon choix pour passer le test Microsoft 70-512. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft 70-512 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

L'équipe de Pass4Test rehcerche la Q&A de test certification Microsoft 70-512 en visant le test Microsoft 70-512. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Microsoft 70-512 sans aucune doute.

C'est sûr que le Certificat Microsoft 70-512 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft 70-512, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft 70-512 peut bien tester la professionnalité de IT.

Le test Microsoft 70-512 est l'un très improtant dans tous les tests de Certification Microsoft, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Pass4Test a de formations plus nouvelles pour le test Microsoft 70-512. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Microsoft 70-512 à tous les candidats qui nous choisissent. L'importance de Certification Microsoft 70-512 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Le programme de formation Microsoft 70-512 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Code d'Examen: 70-512

Nom d'Examen: Microsoft (TS Visual Studio Team Foundation Server 2010)

Questions et réponses: 72 Q&As

70-512 Démo gratuit à télécharger: http://www.pass4test.fr/70-512.html

NO.1 You plan to install a dual-tier Visual Studio Team Foundation Server 2010 environment using two
servers named Server1 and Server2.
You install and configure Microsoft SQL Server 2008 and SQL Server 2008 Analysis Services on Server1.
You install and configure IIS 7.5, SQL Server Reporting Services, and Windows SharePoint Services 3.0
on Server2.
You need to install and configure Team Foundation Server using the two servers.
What should you do?
A. Install Team Foundation Server on Server2 and run the configuration wizard on Server2 using the
Basic option.
B. Install Team Foundation Server on Server2 and run the configuration wizard on Server2 using the
Advanced option.
C. Install Team Foundation Server on Server1 and Server2. Run the configuration wizard on Server1
using the Basic option. Run the configuration wizard on Server2 using the Application-Tier Only option.
D. Install Team Foundation Server on Server1 and Server2. Run the configuration wizard on Server1
using the Advanced option. Run the configuration wizard on Server2 using the Application-Tier Only
option.
Answer: B

certification Microsoft   70-512 examen   certification 70-512

NO.2 You install Visual Studio Team Foundation Server 2010. You have an existing Microsoft Office
SharePoint Server (MOSS) 2007 server that uses Microsoft SQL Server 2008.
You need to configure Team Foundation Server to use the existing SQL Server and SharePoint servers.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install and configure the Team Foundation Server Extensions for SharePoint Products on the MOSS
2007 server.
B. Install and configure the Team Foundation Server 2010 SharePoint Package (.wsp) files on the MOSS
2007 server.
C. Run the configuration wizard on an application tier server, using the Advanced option.
D. Run the configuration wizard on an application tier server, using the Application-Tier Only option.
Answer: AC

Microsoft   certification 70-512   certification 70-512   70-512 examen   certification 70-512   70-512 examen

NO.3 You are setting up a Visual Studio Team Foundation Server 2010 environment. The environment
includes a Microsoft SQL Server 2008 cluster.
You need to ensure high availability and redundancy for the front-end Web servers in the Team
Foundation Server environment.
What should you do?
A. Install a virtual application tier server and create a snapshot.
B. Install two application tier servers. Use one as a cold-standby.
C. Install two application tier servers. Use one as a warm-standby.
D. Install multiple application tier servers with network load balancing.
Answer: D

certification Microsoft   70-512   70-512

NO.4 Your company has a main office and a branch office. You are installing Visual Studio Team Foundation
Server 2010 at the main office.
You need to minimize the bandwidth required to access version-controlled files from the branch office.
What should you do?
A. Install Team Foundation Server Proxy at the main office. Configure the Team Explorer client
applications at the branch office to connect to the proxy server.
B. Install Team Foundation Server Proxy at the branch office. Configure the Team Explorer client
applications at the branch office to connect to the proxy server.
C. Create a team project collection for the branch office. Configure the Team Explorer client applications
at the branch office to connect to the application tier at the main office.
D. Install an application tier server at the branch office and configure it to connect to Team Foundation
Server. Configure the Team Explorer client applications at the branch office to connect to the application
tier server at the branch office.
Answer: B

Microsoft examen   70-512   70-512

NO.5 You have a dual-tier Visual Studio Team Foundation Server 2010 environment. You run Windows
SharePoint Services 3.0 on the application tier server.
You configure Team Foundation Server to support an existing SharePoint Web application. When you
attempt to create a new team project portal in the existing SharePoint Web application, you receive the
following error:
TF218017: A SharePoint site could not be created for use as the team project portal. The following error
occurred: TF250034: An access grant could not be found between Team Foundation Server and the
SharePoint Web application that you specified.
You need to ensure that Team Foundation Server integrates with the SharePoint Web application.
What should you do in the Team Foundation Server Administration Console?
A. In the Extensions for SharePoint Products node, grant access to Team Foundation Server.
B. In the Extensions for SharePoint Products node, modify access to the SharePoint Web application.
C. In the SharePoint Web Applications node, add the SharePoint Web application to Team Foundation
Server.
D. In the SharePoint Web Applications node, remove the SharePoint Web application from Team
Foundation Server.
Answer: A

Microsoft   certification 70-512   70-512

En quelques années, le test de certification de Microsoft 70-512 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Microsoft 70-512? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 70-512. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 70-512, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Le matériel de formation de l'examen de meilleur Microsoft 77-600

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Microsoft 77-600 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

Le test de Certification Microsoft 77-600 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Microsoft 77-600, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Microsoft 77-600.

Code d'Examen: 77-600

Nom d'Examen: Microsoft (MCAS: Windows Vista for the Business Worker)

Questions et réponses: 105 Q&As

77-600 Démo gratuit à télécharger: http://www.pass4test.fr/77-600.html

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Microsoft 77-600 à la première fois.

Guide de formation plus récente de Microsoft 70-536-Cplusplus

Le Certificat de Microsoft 70-536-Cplusplus signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Microsoft 70-536-Cplusplus, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 70-536-Cplusplus sans aucun éffort, en même temps, le test de Microsoft 70-536-Cplusplus demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Microsoft 70-536-Cplusplus et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Pass4Test vous promet de vous aider à passer le test Microsoft 70-536-Cplusplus, vous pouvez télécharger maintenant les Q&As partielles de test Microsoft 70-536-Cplusplus en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Microsoft 70-536-Cplusplus. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Code d'Examen: 70-536-Cplusplus

Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)

Questions et réponses: 84 Q&As

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Microsoft 70-536-Cplusplus. Les documentations particulièrement visée au test Microsoft 70-536-Cplusplus aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Microsoft 70-536-Cplusplus.

70-536-Cplusplus Démo gratuit à télécharger: http://www.pass4test.fr/70-536-Cplusplus.html

NO.1 You are creating an undo buffer that stores data modifications.
You need to ensure that the undo functionality undoes the most recent data modifications first. You also
need to ensure that the undo buffer permits the storage of strings only.
Which code segment should you use?
A. Stack<String