L'avènement de la certification Novell pratique d'examen 050-730 questions et réponses

Le Certificat Novell 050-730 est un passport rêvé par beaucoup de professionnels IT. Le test Novell 050-730 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Novell 050-730. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Novell 050-730 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Novell 050-730 pour prendre un essai.

C'est pas facile à passer le test Certification Novell 050-730, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Novell 050-730 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Novell 050-730, vous allez passer le test Novell 050-730 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

La partie plus nouvelle de test Certification Novell 050-730 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Novell 050-730. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Le test Novell 050-730 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Novell 050-730 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Novell 050-730 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Novell 050-730 avec l'aide de Pass4Test.

Code d'Examen: 050-730
Nom d'Examen: Novell (Certified Novell Identity Manager Administrator)
Questions et réponses: 117 Q&As

050-730 Démo gratuit à télécharger: http://www.pass4test.fr/050-730.html

NO.1 Which installation mode is supported by the integrated installer?
A. Silent mode
B. Non-root mode
C. Console mode
D. AutoYaST mode
E. Standalone mode
Answer: A

certification Novell   050-730   050-730 examen

NO.2 When data changes in the Identity Vault or a connected application, which processes the changes?
A. Drivers
B. Remote Loader
C. Identity Vault
D. Metadirectory Engine
E. Connected application
Answer: D

certification Novell   050-730   050-730   certification 050-730

NO.3 What does a Driver object contain? (Choose 2.)
A. Packages
B. Driver Set
C. Policy Objects
D. Application driver shim
E. Subscriber and Publisher objects
Answer: C,E

Novell examen   050-730   050-730   050-730

NO.4 An Identity Manager Job can only interact with which driver channel?
A. Input
B. Sender
C. Output
D. Receiver
E. Publisher
F. Placement
G. Subscriber
Answer: G

certification Novell   certification 050-730   050-730 examen   050-730

NO.5 When you start Designer for the first time or start Designer without a project listed, which should you
first do?
A. Make sure that the Debug perspective is selected.
B. Make sure that the Plug-in perspective is selected.
C. Make sure that the Designer perspective is selected.
D. Make sure that the Java/Java Browsing perspective is selected.
E. Make sure that the Java Type Hierarchy perspective is selected.
Answer: C

Novell examen   050-730 examen   050-730   050-730

NO.6 Which view do you use to access Policy Simulator? (Choose 2.)
A. The Tasks view
B. The Outline view
C. The Project view
D. The Navigator view
E. The Policy Flow view
Answer: B,E

certification Novell   050-730   certification 050-730   certification 050-730

NO.7 Which statements about the Integrated Installer are true? (Choose 2.)
A. It automatically handles dependencies
B. It automatically installs all of the drivers
C. The iManager plug-in needs to be manually installed
D. It exists only for the Windows operating system family
Answer: A,B

certification Novell   050-730 examen   certification 050-730   050-730

NO.8 Identity Manager uses a MetaDirectory Engine to process Identity Vault data and events. What
component assures changes in the Identity Vault are not lost if a connected system goes offline?
A. Partition
B. Obit flag
C. Change Log
D. Event Cache
Answer: D

Novell   050-730   050-730   050-730 examen   certification 050-730

NO.9 When using Designer, which modeling mode is used to do all low-level operations with driver sets,
drivers, policies and applications?
A. Table Mode
B. System Mode
C. DataFlow Mode
D. Architect Mode
E. Developer Mode
Answer: E

certification Novell   050-730   050-730 examen   certification 050-730   050-730   050-730 examen

NO.10 Which statement is true.?
A. When an event occurs in the Identity Vault, Identity Manager creates an XML document that describes
the Identity Vault event and submits it through the Publisher channel to a driver shim.
B. When an event occurs in the Identity Vault, Identity Manager creates an XML document that describes
the Identity Vault event and submits it through the Subscriber channel to a driver shim.
C. When an event occurs in a connected system, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to a driver shim.
D. When an event occurs in the Identity Vault, a driver shim creates an XML document that describes the
Identity Vault event and submits it through the Subscriber channel to Identity Manager.
E. When an event occurs in a connected system, a Driver Shim creates an XML document that describes
the Identity Vault event and submits it through the Subscriber channel to Identity Manager.
Answer: B

Novell examen   050-730 examen   certification 050-730   050-730   050-730 examen

NO.11 Which view enables you to view the filters that allow the data to flow between all of the systems and
the Identity Vaults as well as view how passwords flow through the different systems?
A. Project view
B. Outline view
C. Dataflow view
D. Navigator view
E. Policy Set view
Answer: C

Novell   050-730 examen   050-730 examen   050-730 examen   050-730

NO.12 What is the minimum RAM system requirement for Designer?
A. 128 MB
B. 256 MB
C. 512 MB
D. 1024 MB
E. 2048 MB
Answer: D

Novell   050-730   certification 050-730   050-730   050-730

NO.13 Which statements are true? (Choose 2.)
A. When an event is being sent to a driver, it is a notification.
B. When an event is being sent to a driver, it is a command.
C. When an event is being sent to Identity Manager, it is a command.
D. When an event is being sent to Identity Manager, it is a notification.
E. Events and commands are handled the same way within an IDM 4 environment.
Answer: B,D

Novell examen   050-730   050-730

NO.14 Which task within Novell iManager allows administrators to view all objects that are associated with a
particular Novell IDM driver?
A. Object Inspector
B. Driver Inspector
C. DriverSet Inspector
D. Driver Cache Inspector
Answer: B

Novell   050-730   050-730   certification 050-730   050-730

NO.15 When using Designer, a perspective is a collection of related views and editors. Which perspective
should be open the first time you run the application?
A. Debug perspective
B. Designer perspective
C. Java/Java Browsing perspective
D. Java Type Hierarchy perspective
E. Plug-in Development perspective
Answer: B

certification Novell   050-730   050-730

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Novell 050-730 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Novell 050-730 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Novell 050-730.

920-172 dernières questions d'examen certification Nortel et réponses publiés

Le test Nortel 920-172 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Nortel 920-172. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Nortel 920-172. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Nortel 920-172. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Est-ce que vous vous souciez encore de réussir le test Nortel 920-172? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: 920-172
Nom d'Examen: Nortel (NCSS-Nortel Communication Control Toolkit Ris.6.0)
Questions et réponses: 58 Q&As

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

920-172 Démo gratuit à télécharger: http://www.pass4test.fr/920-172.html

NO.1 You have been instructed to restore the current NCCT database schema. What is the file that you need
to use to restore the current database schema?
A. EmptyDB.zip
B. NCCT_Empty.zip
C. NCCT_Empty.bak
D. NNCCT_Empty.bak
Answer: D

certification Nortel   920-172   920-172   920-172   920-172

NO.2 You must configure the Bindings order of the network interface cards using Network Connections from
the Control Panel or My Network Places Properties. What order do the NIC have to be in?
A. The order does not matter.
B. ELAN Subnet first then the Nortel Server Subnet (CLAN) second
C. Nortel Server Subnet (CLAN) first then the ELAN Subnet second
D. Depends on the connection rate of each: the higher rate is listed first.
Answer: C

Nortel   920-172   920-172 examen   920-172   920-172 examen   certification 920-172

NO.3 You are upgrading to Nortel Communication Control Toolkit Rls. 6.0. You have a Communications
Server 1000/Meridian 1 with Symposium Call Center with Nortel IVR. Which two of the following Service
Provider Software is installed? (Choose two.)
A. TAPI 3.0
B. TAPI 3.1
C. IPML 2.1
D. IPML 4.0
Answer: BC

Nortel   920-172   920-172 examen

NO.4 You are upgrading to Nortel Communication Control Toolkit Rls. 6.0. TAPI 3.0 is currently running. To
what version of TAPI will you have to upgrade?
A. TAPI 4.1
B. TAPI 4.0
C. TAPI 3.1
D. an upgrade in not needed
Answer: C

Nortel   certification 920-172   certification 920-172   920-172

NO.5 You have just completed a new install of NCCT Rls. 6.0 and have verified that it is configured properly
and operational. You have just finished backing up the NCCT Database and wish to backup the
Symposium TAPI Database. Which of the following would you do perform the backup?
A. Make copy of the spdb.mdb file located in "C:\\Program Files\\Nortel\\CCT\\TAPI"
B. Make copy of the m1spdb.mdb file located in "C:\\Program Files\\Nortel\\Communication Control
Toolkit\\TAPI"
C. Run NCCT Database Administrator and Select the TAPI Database from the Database Drop Down
Menu then Click Backup.
D. Run NCCT Database Administrator and Browse to the TAPI Database location "C:\\Program
Files\\Nortel\\CCT\\TAPI" then Click Backup.
Answer: B

Nortel examen   920-172   920-172 examen   920-172   920-172   920-172 examen

NO.6 You are doing a backup of the NCCT Database after making substantial changes. You are asked to
name your backup. What should you always include in the name of your backups?
A. The version of TAPI.
B. The version of NCCT.
C. The date the backup was made.
D. The name NCCT backup somewhere in the name.
Answer: B

certification Nortel   920-172 examen   920-172   certification 920-172

NO.7 The Embedded Local Area Network (ELAN Subnet) is a dedicated Ethernet TCP/IP Local Area
Network (LAN). The Customer Local Area Network (Nortel Server Subnet/CLAN) is the LAN to which
corporate services and resources connect. Which is not a rule for configuring the ELAN Subnet and
Nortel Server Subnet (CLAN)?
A. Configure the ELAN Subnet in the same subnet as the ELNK.
B. Configure the ELAN Subnet in a separate subnet from the Nortel Server Subnet.
C. The ELAN Subnet MAC address must be added before the Nortel Server Subnet MAC address.
D. Configure the ELAN Subnet and Nortel Server Subnet network as either completely separate or
integrated using a router.
Answer: C

Nortel examen   920-172   920-172 examen   920-172

NO.8 When you install the Communication Control Toolkit server, you must ensure that you have enough
space allocated for the CCT database. What is the minimum and maximum directory size on the default
drive needed to install the NCCT database?
A. minimum of 1 GBytes and maximum size of 2.0 GBytes
B. minimum of 150 MBytes and maximum size of 1.0 GBytes
C. minimum of 68.1 MBytes and maximum size of 2.0 GBytes
D. minimum of 50.7 MBytes and maximum size of 2.1 GBytes
Answer: C

Nortel examen   920-172   920-172

NO.9 After you have restored the Symposium TAPI Database. What is the order in which the following
services need to be started?
A. NCCT Data Access Layer Service, NCCT TAPI Connector, NCCT Server Service Telephony Service,
ACDProxy Service
B. NCCT Data Access Layer Service, NCCT TAPI Connector, ACDProxy Service, Telephony
Service,NCCT Server Service
C. Telephony Service, ACDProxy Service, NCCT Data Access Layer Service, NCCT TAPI Connector,
NCCT Server Service.
D. NCCT Server Service, Telephony Service, ACDProxy Service, NCCT Data Access Layer Service,
NCCT TAPI Connector.
Answer: C

Nortel examen   920-172   certification 920-172   certification 920-172   920-172 examen

NO.10 Of the following Third Party software which two does Nortel approve to be installed on a Nortel
Communication Control Toolkit server? (Choose two.)
A. AntiVirus
B. FTP Server
C. pcAnywhere
D. Microsoft Office
Answer: AC

Nortel examen   920-172 examen   certification 920-172   certification 920-172   920-172

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Nortel 920-172 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Nortel 920-172. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Nortel 920-172, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Guide de formation plus récente de Nortel 920-159

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Nortel 920-159. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Selon les anciens test Nortel 920-159, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Code d'Examen: 920-159
Nom d'Examen: Nortel (Ncss callpilot 2.x/3.0)
Questions et réponses: 140 Q&As

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Nortel 920-159 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Nortel 920-159 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Nortel 920-159.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Nortel 920-159. Votre argent sera tout rendu si vous échouez le test.

920-159 Démo gratuit à télécharger: http://www.pass4test.fr/920-159.html

NO.1 .XXXX .com has a CallPilot 3.0 configuration connected to a Meridian 1. the CallPilot
platform connect to the network loops in the IPE shelf through MGate cards. The MGate
cards plug into the Meridian 1 IPE shelf. Which three platform types connect using the
Mgate card? (Choose three.0?
A. 200i
B. 201i
C. 702t
D. 1001ro
E. 1002rp
Answer: A.B.C

NO.2 A site has a CallPilot 3.0 server. Which two administrative functions support the
web-based CallPilot Manager administrative application? (Choose two.)
A. Managing system configuration and backups
B. Creating application with Application Builder
C. Managing mailbox Users, groups, and permissions
D. Managing CallPilot Simple network Maintenance Protocol (SNMP) traps
Answer: A.C

NO.3 .When provisioning the Embedded Local Area Network (ELAN) on a CS 1000 system for a
site with a CallPilot 3.0 system with 96 DSO channels, what number should you set the
maximum number of call registers for CSL input (CSQI in LD 17)?
A. 20
B. 96
C. 192
D. 255
Answer: C

certification Nortel   certification 920-159   certification 920-159   certification 920-159   920-159

NO.4 You are installing a CallPilot 3.0 system with 32 Voice channels, 8 Fax channels, and 4
ASR (automated speech recognition) Cannels using a CallPilot 702t server and a Meridian
1 IP Enable (IE) Option 61C switch. How many NTRB18CA MGate cards must be
installed in the switch to support this configuration?
A. 1
B. 2
C. 3
D. 4
Answer: B

Nortel examen   certification 920-159   920-159   920-159

NO.5 When installing a 96-chabbel 3.0 system using a 1003rp server and a CS 1000 system, how
would you install the Nortel Network software feature key adapter?
A. The Nortel Networks software feature Key adapter is installed in its bracket on the
motherboard in the 102rp server.
B. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
C. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
D. The Nortel Networks software feature Key adapter is installed in the Parallel port connector
LPT1 on the rear of the 1002rp server.
Answer: D

Nortel examen   certification 920-159   certification 920-159   920-159

NO.6 .Exhibit
Prior to installing a CallPilot 3.0 system, you review, the Configuration Wizard worksheet.
The customer has provided category 5 cable connections to their corporate LAN for the
Switch Ethernet connection, the CallPilot Server Customer LAN (CLAN) Ethernet
connection, and the CallPilot Server Embedded LAN (ELAN) Ethernet connection. The
network address information (shown in the exhibit) for the Switch IP address, the CallPilot
server ELAN IP address, and the CallPilot Server CLAN IP address integrate with the
customer's internal network. What action would you take?
A. Proceed with the installation using the category 5 cable connections, IP addresses and Subnet
mask provided by the customer.
B. Proceed with the installation but do not use the category 5 cable connections provided by the
customer for the Switch Ethernet connection and the CallPilot server ELAN Ethernet
connection. Use a separate category 5 cable that connects directly from the switch to the ELAN
network interface connector on the server.
C. Inform the customer that IP address beginning with 192.168 are private address and if used
the ELAN will not be able to be connected to the internet.
D. Inform the customer that the ELAN must be on a separate IP network isolated from the
CLAN. Recommend that they use a dedicated hub that can either be supplied by Nortel Network
or a third party for the ELAN and recommend different IP addresses for switch and the ELAN
NIC.
Answer: D

Nortel   920-159   certification 920-159   920-159

NO.7 When installing a 40-channel 3.0 system using a 201i server and a Meridian 1 Option 11C
mini switch, how should you set the SCSI ID on the Tandberg SLR5 tape drive
(NTRH9038)?
A. Rotate the dial on the SCIS ID rotary switch unit the arrow points to 3.
B. Use the blade of a screwdriver to press either the plus (+) or minus (? Button the SCSI ID
switch to set the SCIS ID to 5.
C. Use the blade of a screwdriver to set DIP switches as follows.
1=ON, 2=off, 3=Off, 4=Off, 5=Off
D. The SCSI ID for the Tandberg SLR5 tape drive (NTRH9038) is set when you run the
Configuration Wizard after you install the CallPilot system.
Answer: B

certification Nortel   920-159   920-159

NO.8 A site has a CallPilot server interworking with a Symposium server. Where are the
applications (announcement service, menus, etc.) stored to support Symposium to CallPilot
integration?
A. in a folder
B. in a mailbox
C. on the C drive
D. by a backup file
Answer: A

certification Nortel   920-159   certification 920-159

NO.9 Which three CallPilot features are supported by Business Communication Manager
(BCM) 3.0? (Choose three.)
A. ability to annotate faxes
B. ability to save voice messages
C. ability to reject passwords (such as 888888)
D. ability to set message sensitivity to urgent or Normal
Answer: A.B.D

NO.10 .When installing a 40-channel CallPilot 3.0 system using a 201i server and a CS 1000
system, how do you connect the SCSI connection to the server?
A. The SCSI connection to the 201i server is made with the low profiles right-angle SCIS
connector on the SCIS connector on the 201i server faceplate.
B. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made with the
CD-ROM drive SCSI cable NTRH1408 attached from the SCIS connector on the 201i server
faceplate to the SCSI adapter A0763912 on the CD-ROM drive
C. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made via the
backplane connector in the Media Gateway or Media Gateway Expansion with the multi I/O
cable (NTRH0912) to the next drive in the SCIS chain.
D. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is madewith the
intermediate SCIS cable NTRH1408 that connect from the SCIS connector on the 201i server
faceplate to the I/O panel connector and the NTRH410 SCSIcable that connect from the I/O
panel connector to the next device in the SCSI chain.
Answer: A

Nortel examen   920-159   920-159   920-159   920-159

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Nortel 920-159 et passer le test à la première fois.

Nortel 920-338 examen pratique questions et réponses

Après une longue attente, les documentations de test Nortel 920-338 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Nortel 920-338 à la première fois.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Nortel 920-338 dans Pass4Test pour se former avant le test Nortel 920-338.

Il demande les connaissances professionnelles pour passer le test Nortel 920-338. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Nortel 920-338, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Nortel 920-338. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Nortel 920-338 sans aucune doute.

Code d'Examen: 920-338
Nom d'Examen: Nortel (BCM50 Rls.3.0 BCM200/400 Rls 4.0 and BCM450 Rls. 1.0 Instal Con)
Questions et réponses: 70 Q&As

Vous n'avez besoin que de faire les exercices à propos du test Nortel 920-338 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Pass4Test est un site à offrir particulièrement la Q&A Nortel 920-338, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Nortel 920-338, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Nortel 920-338 et même se renforcer vos connaissances professionnelles IT.

920-338 Démo gratuit à télécharger: http://www.pass4test.fr/920-338.html

NO.1 On a Nortel Business Communications Manager 50 (BCM50), how do you program several special
features at once for CallPilot mailboxes?
A.Enable networking in the Class of Service.
B.Assign express messaging lines in mailbox properties.
C.Assign features by selecting a Class of Service.
D.Purchase additional authorization codes.
Answer: C

Nortel examen   certification 920-338   920-338   920-338 examen

NO.2 On a company's default system, six buses of DS30 channel blocks are assigned to Media Bay Modules
(MBM) (2/6 channel split). The DS30 allocation needs to be changed to a 3/5 split to accommodate
increased IP telephony requirements.
How is this change accomplished?
A.The BCM 200/400 assigns bus 6 to the system bus resource.
B.The BCM 200/400 assigns bus 6 to the system bus resource through the MBM dip switches.
C.The BCM 200/400 assigns bus 7 to the system bus resource.
D.The BCM 200/400 assigns bus 7 to the system bus resource, although all telephony programming will
be defaulted.
Answer: C

Nortel   certification 920-338   920-338   certification 920-338

NO.3 The Nortel Business Communications Manager 50 (BCM50) expansion unit is designed to support
Media Bay Modules (MBMs). These modules are available in many configurations.
What is the maximum number of MBMs that the system can support?
A.one
B.two
C.four
D.six
Answer: B

Nortel   certification 920-338   920-338   920-338   920-338 examen   920-338 examen

NO.4 You require a Nortel Business Communications Manager 50 (BCM50) system with an Ethernet router.
Which main unit must you choose?
A.BCM50
B.BCM50a
C.BCM50b
D.BCM50e
Answer: D

certification Nortel   920-338   certification 920-338   920-338   920-338

NO.5 You are configuring a BCM50 VoIP network using SIP trunks. You want to ensure callers from remote
systems are authorized to place calls to the local system.
How do you do this?
A.Enable Remote Authentication, and enter each DN to be verified in the Local Accounts table.
B.Enable Local Authentication, and enter User ID/Password combinations in the Local Accounts table.
C.Enable Remote Authentication, and enter User ID/Password combinations in the Local Accounts table.
D.Enable Local Authentication, and enter each DN to be verified in the Local Accounts table.
Answer: B

Nortel examen   920-338   920-338 examen

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Nortel 920-338. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Le plus récent matériel de formation examen Nortel 922-109 de certification

Obtenez la Q&A de test Nortel 922-109 de Pass4Test plus tôt, vous pouvez réussir le test Certification Nortel 922-109 plus tôt.

Le test Nortel 922-109 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Nortel 922-109. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Nortel 922-109. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Code d'Examen: 922-109
Nom d'Examen: Nortel (Communications Server 1000 Rls.6.0 BARS/NARS)
Questions et réponses: 34 Q&As

Le test simulation Nortel 922-109 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Nortel 922-109 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Vous aurez une assurance 100% à réussir le test Nortel 922-109 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Pass4Test peut offrir la facilité aux candidats qui préparent le test Nortel 922-109. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Nortel 922-109 selon le résumé de test réel Nortel 922-109. Vous pouvez réussir le test à la première fois sans aucune doute.

922-109 Démo gratuit à télécharger: http://www.pass4test.fr/922-109.html

NO.1 544-3333 not complete?
A.AC1 Access Code was not dialed
B.NXX 544 is not provisioned in the customer's database
C.3333 is Denied under the SDRR programming
D.AC2 Access Code was not dialed
Answer:B

Nortel   certification 922-109   922-109   922-109

NO.2 Click on the Exhibit button. Consider a customer's dialing plan and programming shown in the exhibit.
Assuming all required Route List Indexes have been programmed, why will the station user's dialed call of

NO.3 With Communication Server 1000 Rls. 6.0, Zone Based Dialing is supported for both public and private
dial and numbering plans for on-net calls. Which statements best describe Zone Based Dialing? (Choose
two.)
A.For outgoing trunk calls, CLID is converted to E.164 format when DIALPLAN is configured as PUB, for
PRV type - CLID remains as is.
B.On-net Calls are routed using each CS 1000 site dial plan database and are routed to the remote
system to process.
C.Private and Public (E.164) dial plans and features are not retained. Zone Based Dialing uses the
Flexible Dial Plan information to route network-wide.
D.A new Zone type, Numbering Zones, provides a user interface to configure the parameters for:
Zone-based Parameters, Flexible Dial Plan, and Direct Inward Dial number.
Answer:A D

Nortel examen   922-109   922-109   922-109 examen   922-109

NO.4 Click on the Exhibit buttons. Given the customer's programmed database shown in the exhibits and
where AC1 = 9, which RLI will the call complete when a station user dials 9-814-666-3434?
A.RLI 2
B.RLI 3
C.RLI 4
D.RLI 9
E.call will not complete as dialed
Answer:E

Nortel   922-109 examen   922-109   922-109

NO.5 Click on the Exhibit button. A customer's dialing requirements, listed below, require that all station users
assigned an NCOS of 3 and Class of Service of Conditionally Toll Denied (CTD) be able to place toll calls
from the United States to Australia. Australia Country Code: 61 NCOS of 3 has an FRL of 3 Expensive
Routers are not being used With reference to the exhibit, which table will allow all station users to be able
to place these toll calls?
A.Provisioning Table A
B.Provisioning Table B
C.Provisioning Table C
D.Provisioning Table D
Answer:B

Nortel   certification 922-109   922-109 examen

NO.6 Click on the Exhibit button. Given the SDRR programming options shown in the exhibit, which SDRR
programming would allow a user at to be able to dial 1-900-867-3333, but not successfully dial any other
1-900 based number?
A.Table 1
B.Table 2
C.Table 3
D.Table 4
Answer:A

Nortel examen   922-109   922-109

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Meilleur Network Appliance NS0-153 test formation guide

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Network Appliance NS0-153 dans Pass4Test pour se former avant le test Network Appliance NS0-153.

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Network Appliance NS0-153 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Network Appliance NS0-153, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

Le test Network Appliance NS0-153 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Network Appliance NS0-153 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Network Appliance NS0-153 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Network Appliance NS0-153 qui vous amenera le succès du test Network Appliance NS0-153, au lieu de traivailler avec peine et sans résultat.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Network Appliance NS0-153 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Code d'Examen: NS0-153
Nom d'Examen: Network Appliance (Network Appliance Storege Networking)
Questions et réponses: 184 Q&As

Vous aurez une assurance 100% à réussir le test Network Appliance NS0-153 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

NS0-153 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-153.html

NO.1 Applications, such as databases, running on NAS or iSCSI or FC SAN must be
__________________.
A.prepared for snapshots by flushing buffers to disk and momentarily suspending activity.
B.disconnected from their storage resources during the snapshot.
C.using dynamic multipathing during a backup.
D.mirrored with a host-based volume manager to be backed-up.
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.2 To view per client NFS statistics on the storage appliance, options nfs.per_client_stats.enable
must be turned on.
A.True
B.False
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.3 What is the definition of the cifs setup command?
A.It displays the mount point of all shared directories.
B.It displays the names of all mounted directories on the storage system.
C.It displays the prompts for CIFS configuration information.
D.It displays a list of the users on the storage system.
Correct:C

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.4 Which command would you use to verify that the iSCSI service is running?
A.license add iSCSI
B.iscsi service
C.iscsi status
D.iscsi protocol
Correct:C

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.5 To export volumes and directories automatically on reboot, include them in the /etc/exports file.
A.True
B.False
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.6 Which one of the following will enable "symlink_strict_security"?
A.options cifs.symlink_strict_security on
B.cifs shares -change -symlink_strict_security
C.options symlink_strict_security=true
D.options symlink_strict_security=on
Correct:B

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.7 What is the outcome of this command? lun create -b /vol/vol2/.snapshot/testsnap/lun0
/vol/vol2/lun0.clone
A.It creates a duplicate of the clone process of lun0.
B.It creates a clone of the writeable snapshot of lun0.
C.It creates a writeable snapshot of lun0.
D.It creates a snapshot "testsnap" of vol2.
Correct:C

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.8 A quota target can be defined as _______________.
A.the maximum amount of disk space in a volume.
B.the maximum number of files in a disk.
C.a user, group, or qtree to which a quota is applied.
D.a specific disk space threshold.
Correct:C

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.9 The writeable snapshot that is created for a LUN clone depends on ___________.
A.mirroring.
B.the snapshot taken at the time the clone was created.
C.exclusive access to the volume.
D.the data in the original LUN not changing.
Correct:B

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.10 ____________ is the default cfmode for new installations of Data ONTAP 7.2.
A.single image
B.mixed
C.partner
D.dual fabric
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.11 Three methods of creating a LUN are: *lun setup *lun map *FilerView
A.True
B.False
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.12 If the client is a CIFS client, locks are __________.
A.advisory
B.mandatory
C.ordered
D.optional
Correct:B

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.13 Using the output below, a co-worker determined that these are type "Solaris" LUNs. What would
your determination be? lun show -m LUN pathMapped to LUN ID
--------------------------------------------------- /vol/vol1/lun0 solaris-igroup0 0 /vol/vol1/lun1 solaris-igroup1
0 /vol/vol1/qtree1/lun2 solaris-igroup2 0 /vol/vol1/qtree1/lun3 solaris-igroup3 0
A.These are type "Solaris" LUNs.
B.These are NFS LUNs, but the exact OS cannot be determined.
C.Not enough information is given here. Run the lun show -v command to get the information requested.
D.Not enough information is given here. Run the lun map command to get the information requested.
Correct:C

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.14 Which command is the most appropriate for troubleshooting a multiprotocol authentication
problem?
A.wcc
B.rdfile /etc/rc
C.priv set advanced
D.sysstat 1
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.15 UNIX allow file access based on __________.
A.GID or UID and UNIX permissions.
B.NT ACLs and UNIX permissions.
C.NT ACLs and SID.
D.GID or UID and ACLs.
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.16 Which security method encrypts the data?
A.IPSec
B.CHAP
C.LUN masking
D.Header and Data Digests
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.17 If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the
storage appliance and do a restart for the changes to take effect.
A.True
B.False
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.18 To configure a storage system as a member of an active directory, the time on the storage
system must be synchronized with the time on the Domain Controller.
A.True
B.False
Correct:A

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.19 If you believe you have a FC SAN performance problem, which NetApp utility or command
would gather both your Solaris host and storage appliance data for analysis?
A.poststat
B.perfstat
C.prestat
D.sio_ntap.exe
Correct:B

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

NO.20 Which three are used for creating LUNs on the storage appliance? (Choose 3)
A.lun create
B.lun setup
C.FilerView
D.lun config
Correct:A B C

Network Appliance   NS0-153   NS0-153 examen   NS0-153 examen

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Network Appliance NS0-153. Les documentations particulièrement visée au test Network Appliance NS0-153 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Network Appliance NS0-153.

L'avènement de la certification Network Appliance pratique d'examen NS0-504 questions et réponses

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Network Appliance NS0-504 dans Pass4Test pour se former avant le test Network Appliance NS0-504.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Network Appliance NS0-504. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de NS0-504, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Code d'Examen: NS0-504
Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer - SAN, Cluster-Mode)
Questions et réponses: 398 Q&As

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Obtenez la Q&A de test Network Appliance NS0-504 de Pass4Test plus tôt, vous pouvez réussir le test Certification Network Appliance NS0-504 plus tôt.

NS0-504 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-504.html

NO.1 Which command do you use on a Cisco switch to view the currently active zoneset?
A. show zone analysis
B. show zoneset active
C. show running-config
D. show config active
Answer: B

certification Network Appliance   NS0-504 examen   certification NS0-504   NS0-504   NS0-504

NO.2 When running diagnostic tests after an initial installation of a NetApp FAS3000 storage system,
which command is used to run a comprehensive set of diagnostic tests on the entire system?
A. all
B. comprehensive
C. full
D. stress
Answer: A

certification Network Appliance   NS0-504   NS0-504 examen   NS0-504   certification NS0-504

NO.3 Which two Data ONTAP Cluster-Mode clone technology can clone an individual LUN inside a
volume without cloning the entire volume?
A. FlexClone
B. LUN Clone
C. Snap Clone
D. Vol Clone
E. Aggr Clone
Answer: B

Network Appliance examen   NS0-504   NS0-504

NO.4 You can avoid data corruption when you issue the cf forcetakeover -d command if the remote
node is ________.
A. in a giveback mode
B. fenced off manually
C. powered on and accessible
D. powered off and inaccessible
Answer: D

certification Network Appliance   certification NS0-504   certification NS0-504   NS0-504   certification NS0-504   NS0-504 examen

NO.5 These are three methods of creating a LUN:
* lun create
* lun map
* lun setup
A. True
B. False
Answer: B

certification Network Appliance   NS0-504   NS0-504 examen   NS0-504   NS0-504 examen   NS0-504 examen

NO.6 Which commands allow you to enable NetApp deduplication and verify space savings?
A. sis on <vol>, sis start <vol>, df s <vol>
B. asis on <vol>, asis start <vol>, df s <vol>
C. sis on <vol>, sis start <vol>, df r <vol>
D. sis on, sis start, df p <vol>
Answer: A

Network Appliance   NS0-504 examen   NS0-504 examen

NO.7 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that
reflects
the state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance   NS0-504   NS0-504   NS0-504   certification NS0-504

NO.8 A company wants to use jumbo frames in their Ethernet network. They should set the packet
size
to which industry conventional value?
A. 1200
B. 1500
C. 9000
D. 12000
Answer: C

Network Appliance   NS0-504   NS0-504   certification NS0-504   certification NS0-504

NO.9 When assessing a current storage solution, it is critical to document the current NetApp
storage
system configuration.
Which factor should NOT be considered when documenting this existing configuration?
A. Data ONTAP version
B. current data layout (RAID groups, aggregates, volumes, etc...)
C. storage system name and IP
D. host power cables and power usage
Answer: D

Network Appliance   NS0-504   NS0-504   NS0-504

NO.10 Which feature makes it possible for a storage administrator to add more than two storage
systems
to a cluster?
A. Scale horizontal
B. Scale out
C. Scale up
D. Scale vertical
Answer: B

Network Appliance   NS0-504 examen   certification NS0-504

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Network Appliance NS0-504 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Pass4Test offre de Microsoft MB6-826 matériaux d'essai

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft MB6-826. Le guide d'étude de Pass4Test comprend les excercices de Microsoft MB6-826 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft MB6-826. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft MB6-826.

Code d'Examen: MB6-826
Nom d'Examen: Microsoft (AX 2009 Product Builder)
Questions et réponses: 50 Q&As

Le test Microsoft MB6-826 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft MB6-826 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft MB6-826.

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Microsoft MB6-826 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

MB6-826 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-826.html

NO.1 You are a Product Designer in the Contoso Company. You create a product model for a home theater.
The theater has the following options:
Television: CRT, LCD, Plasma
Number of speakers: 2, 3, 5
Speaker height: 30.5, 45.5, 50.5
Which type of variables do you use to make each option available in the Product Builder configuration
form?
A.Enumerated text variable for the first option, Integer for the second, and Real for the third
B.Enumerated text variable for the first option, Real for the second, and Integer for the third
C.Enumerated text variables for the first and third options, and Real for the second
D.Enumerated text variable for the first, second, and third options WCalibriTahomaZ
Answer: D

Microsoft   MB6-826   MB6-826   MB6-826

NO.2 You are a Product Designer responsible for creating product models. Your task is to create a model for
a home theater. The home theater dimension calculation you plan to implement in the modeling tree is
rather complex and depends on a number of factors. If this calculation fails, you want the user to view an
error message and to abort the configuration. What must you implement to abort the configuration if the
calculation fails?
A.Create an Action rule.
B.Create a Constraint rule.
C.Create a Message node of the error type. It automatically aborts the configuration.
D.It is not necessary to implement anything. In case some calculation fails the configuration is always
aborted and a standard error message is displayed. WCalibriTahomaZ
Answer: C

Microsoft   MB6-826   certification MB6-826   MB6-826

NO.3 For what purpose do you create global rules?
A.To use them as templates when creating rules for the model.
B.To make them available for all the users, regardless of user profiles.
C.To be able to attach them to several product models.
D.To be able to automatically apply them to all the models created. WCalibriTahomaZ
Answer: C

Microsoft   MB6-826 examen   MB6-826 examen

NO.4 You are a Product Designer in the Contoso Company responsible for creating product models. Among
the customers of the company, the most popular configuration of a home theater item is the one with LCD
television and five speakers. You are asked by the Order Processor to make the "LCD" and "five" values
default for the Television and Speakers variables. You added these variables to the Default values form
and now must fill the Valid for (Customer relation) and Valid for (Item relation) fields for each variable.
What must you select in these two fields for each variable?
A.Table and All
B.All and Table
C.All and All
D.Table and Table WCalibriTahomaZ
Answer: B

Microsoft   certification MB6-826   MB6-826   MB6-826

NO.5 For which of the following options can you set up default values in a product model?
A.all modeling variables
B.all modeling variables and all calculation variables
C.all variable groups
D.only item groups WCalibriTahomaZ
Answer: A

Microsoft examen   certification MB6-826   MB6-826

NO.6 You are a Product Designer in the Contoso Company responsible for creating a model for a
configurable projector. You want projector options to display on two separate tabs in the Product Builder
configuration form. General projector options must be displayed on the General tab, and options for the
projector lamp - on the Lamp tab. How can you achieve this?
A.Create two variable groups, name them accordingly and then add them to the model.
B.Use the template variable groups and name them General and Lamp when adding them to the model.
C.Open the Product Builder configuration form in the AOT, create and name tabs there.
D.Click Test model and edit the form that opens. WCalibriTahomaZ
Answer: A

Microsoft examen   MB6-826   MB6-826   MB6-826

NO.7 You are a Product Designer responsible for creating a table constraint. Now it is time to add it to the
product model. How can you accomplish this?
A.Add the table constraint to the model as one of the validation rules.
B.Attach the table constraint to the model from the Table constraints form.
C.Add the table constraint to the Table constraints tab and then add related modeling variables to the
Modeling variables tab.
D.Add the table constraint to the Table constraints tab. Related Table variables are added to the model
automatically. WCalibriTahomaZ
Answer: D

Microsoft examen   certification MB6-826   MB6-826   MB6-826

NO.8 For which of the following purposes can you use the Description field in the Variable groups form?
A.To have its content displayed as a tab name in the Product Builder configuration form.
B.To have its content displayed as a help text in the Product Builder configuration form.
C.To hold product model designer's comments about the modeling variable.
D.To hold notes to the Production Department about how the item is to be produced. WCalibriTahomaZ
Answer: A

Microsoft examen   MB6-826 examen   MB6-826

NO.9 You are a Product Designer in the Contoso Company. The company opens a new subsidiary in Russia.
The Product Builder configuration forms must be translated to Russian to be used by local employees.
How can you make the Product Builder configuration forms available in Russian?
Choose the 2 that apply.
A.Add Russian to the Available languages in the Product Builder parameters form.
B.Type the translation in the form that opens after clicking Language texts in the Modeling variables form.
C.Type the translation in the Translation table located under Product Builder > Setup.
D.Type the translation in the form that opens after clicking Language texts in the Variable group form.
WCalibriTahomaZ
Answer: BD

certification Microsoft   certification MB6-826   certification MB6-826   MB6-826

NO.10 What are the mandatory steps to take to make the user profiles functional?
Choose the 2 that apply.
A.Attach user profiles to employees.
B.Assign user profiles to variables.
C.Attach user profiles to Microsoft Dynamics AX users.
D.Activate user profiles in the Product Builder parameters form. WCalibriTahomaZ
Answer: AB

Microsoft   MB6-826   MB6-826 examen

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft MB6-826. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Certification Microsoft de téléchargement gratuit pratique d'examen 70-294, questions et réponses

Si vous traviallez dur encore pour préparer le test de Microsoft 70-294 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Microsoft 70-294.

L'équipe de Pass4Test rehcerche la Q&A de test certification Microsoft 70-294 en visant le test Microsoft 70-294. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Microsoft 70-294 sans aucune doute.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Microsoft 70-294. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Pass4Test est un seul site de provider le guide d'étude Microsoft 70-294 de qualité. Peut-être que vous voyiez aussi les Q&A Microsoft 70-294 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Microsoft 70-294. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: 70-294
Nom d'Examen: Microsoft (Planning, Implementing, and Maintaining a Microsoft Windows Server 2003 AD Infrastructure)
Questions et réponses: 220 Q&As

70-294 Démo gratuit à télécharger: http://www.pass4test.fr/70-294.html

NO.1 Your company has a main office and a single branch office. The two offices are connected through a
WAN link. You have Active Directory directory service site objects for each office. Domain controllers are
associated with the appropriate site objects.
Users in the main office are currently authenticated by domain controllers in the branch office.
You need to ensure that users in the main office are authenticated by the domain controllers in the main
office.
What should you do?
A. Clear the Bridge all site links option.
B. Configure a preferred bridgehead server for the site for the main office.
C. Associate the subnets for the main office with the site for the main office.
D. Associate the subnets for the branch office with the site for the branch office.
Answer: C

Microsoft   70-294 examen   70-294   70-294 examen   certification 70-294

NO.2 Your company has a single Active Directory directory service forest with four domains. The domains
are named contoso.com, corp.contoso.com, fabrikam.com, and corp.fabrikam.com.
Users in the corp.contoso.com domain frequently access resources that are located in the
corp.fabrikam.com domain.
You need to improve user logon times from the corp.contoso.com domain to the corp.fabrikam.com
domain.
What should you do?
A. Enable universal group caching in sites where corp.contoso.com domain controllers are located.
B. Enable universal group caching in sites where corp.fabrikam.com domain controllers are located.
C. Create a shortcut trust from the corp.fabrikam.com domain to the corp.contoso.com domain.
D. Create a shortcut trust from the corp.contoso.com domain to the corp.fabrikam.com domain.
Answer: C

Microsoft   70-294   certification 70-294   70-294   70-294 examen

NO.3 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain.
The company has a high rate of employee turnover, and administrators create several hundred user
accounts per week.
A domain controller in the child domain fails. Within several hours of the failure, administrators are unable
to create new user accounts within the child domain.
You need to ensure that administrators can create user accounts in the child domain.
What should you do?
A. Seize the PDC Emulator role in the child domain.
B. Seize the RID Master role in the child domain.
C. Seize the Infrastructure Master role in the child domain.
D. Create a new domain controller in the child domain, and configure it as a global catalog server.
Answer: B

certification Microsoft   70-294 examen   70-294 examen   70-294 examen

NO.4 Your company has a single Active Directory directory service domain. The company has five Active
Directory sites on the West coast and five Active Directory sites on the East coast. The West coast sites
and the East coast sites are in two separate hub-and-spoke configurations that are separated by a firewall.
All Active Directory replication between the West coast and East coast occurs between a single West
coast domain controller named WestDC1 and a single East coast domain controller named EastDC1.
You need to ensure that if WestDC1 fails, other West coast domain controllers continue to replicate with
each other, but not with East coast domain controllers.
What should you do?
A. Create site links between the West coast hub site and the West coast spoke sites.
B. Create a site link bridge between the West coast hub site and the East coast hub site.
C. Clear the Bridge all site links option and create a site link bridge for all the East coast sites.
D. Clear the Bridge all site links option and create a site link bridge for all the West coast sites.
Answer: D

Microsoft   certification 70-294   70-294

NO.5 Your company s Windows Server 2003 environment consists of a single Active Directory directory
service forest. The forest has multiple domains and three sites named Site1, Site2, and Site3. Site1 is the
main office and has four domain controllers. Two of the domain controllers are global catalog servers.
Site2 is a branch office with two domain controllers. Site3 is a branch office with a slow and unreliable
WAN link and two domain controllers.
You need to improve user logon performance for users in Site2 and Site3.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Enable change notification between Site1 and Site2.
B. Enable change notification between Site1 and Site3.
C. Implement universal group membership caching in Site2.
D. Implement universal group membership caching in Site3.
Answer: CD

Microsoft   70-294   certification 70-294

NO.6 Your company has a single Active Directory directory service forest with three domains.
You plan to modify the Active Directory schema.
You need to identify the schema master for the forest.
What should you do?
A. Run the regsvr32 schmmgmt.dll command. Use the Active Directory Domains and Trusts snap-in.
B. Run the regsvr32 schmmgmt.dll command. Use the Active Directory Users and Computers snap-in.
C. Use the Dsget command-line tool.
D. Use the Dsquery command-line tool.
Answer: D

Microsoft   certification 70-294   70-294   70-294

NO.7 Your Windows Server 2003 environment consists of a single Active Directory directory service forest
with multiple domains. The forest functional level is set to Windows 2000 Server. Your company has a
main office and four branch offices. Each office has two domain controllers. The domain controllers in the
main office are global catalog servers.
In the branch offices, searches for some printers in Active Directory are slow.
You need to improve the performance of Active Directory printer searches in the four branch offices.
What should you do?
A. Enable universal group membership caching in each branch office.
B. Increase the number of domain controllers in each branch office.
C. Add global catalog services to each branch office.
D. Upgrade the forest functional level to Windows Server 2003.
Answer: C

Microsoft examen   70-294   70-294

NO.8 You have a single Active Directory directory service domain. There is a branch office that connects to
the main office through a low-bandwidth WAN link.
The first domain controller is named DC1 and is located in the main office. The branch office has a single
server named Server1. Server1 runs Windows Server 2003.
You are preparing to install Active Directory on Server1. You back up the system state of DC1, and you
send the backup to the administrator at the branch office.
You need to make Server1 an additional domain controller in your domain, while minimizing the
bandwidth usage between the two offices.
What should you do?
A. Restore the system state data from DC1 to an alternate location on Server1. Run the dcpromo
command with the /adv parameter, and select the From these restored backup files option.
B. Restore the system state data from DC1 to the original location on Server1. Run the dcpromo
command with the /adv parameter, and select the From these restored backup files option.
C. Create a new Active Directory site. Create an unattended installation file with the
CriticalReplicationOnly parameter. Run the dcpromo command with the /answer parameter.
D. Create a new Active Directory site. Create an unattended installation file with the SiteName parameter
to place Server1 into the new site. Run the dcpromo command with the /answer parameter.
Answer: A

Microsoft examen   70-294   70-294   70-294 examen   70-294

NO.9 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain. The company has a main office and several branch offices. You are planning to remove the
child domain.
All of the domain controllers in the forest root domain are located in the main office, and all FSMO roles
are on separate domain controllers. The last domain controller in the child domain is named DC1 and is
located in a branch office.
You attempt to remove Active Directory from DC1, but you receive an error message stating that the
operation could not be completed.
You need to remove Active Directory from DC1.
What should you do?
A. Restore connectivity to the domain controller that holds the Domain Naming Master role.
B. Restore connectivity to the domain controller that holds the Schema Master role.
C. Restore connectivity to the domain controller that holds the Infrastructure Master role.
D. Restore connectivity to the domain controller that holds the PDC Emulator role.
Answer: A

Microsoft   70-294   70-294   70-294

NO.10 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain. The child domain is set to the default domain functional level.
You install a second domain controller in the child domain by promoting a server named SVR1.
You need to rename SVR1 to DC2, and you must ensure that there will be no interruption in the ability of
client computers to authenticate to DC2, except during reboot.
What should you do?
A. Raise the domain functional level of the child domain to Windows 2000 native. Use System Properties
on SVR1 to rename SVR1 to DC2.
B. Raise the domain functional level of the child domain to Windows Server 2003. Run the netdom
command to rename SVR1 to DC2.
C. Raise the domain functional level of the child domain to Windows 2000 native. Run the dcpromo
command on SVR1 to remove Active Directory directory service. Use System Properties to rename SVR1
to DC2. Run the dcpromo command to re-install Active Directory.
D. Raise the domain functional level of the child domain to Windows Server 2003. Create a DNS CNAME
record for DC2.contoso.com that points to SVR1.contoso.com.
Answer: B

Microsoft examen   70-294   70-294   70-294

NO.11 Your company has a single Active Directory directory service forest with multiple domains. The
Schema FSMO role is held by one of the domain controllers in the forest root domain. The Domain
Naming Master FSMO role is held by one of the domain controllers in a child domain. All domain
controllers have Windows Server 2003 installed.
You need to upgrade all domain controllers to Windows Server 2003 R2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Run the adprep /forestprep command in the forest root domain.
B. Run the adprep /forestprep command in all the child domains.
C. Run the adprep /domainprep command in all the child domains only.
D. Run the adprep /domainprep command in all domains.
Answer: AD

Microsoft   70-294 examen   70-294 examen   70-294 examen

NO.12 Your company has a single Active Directory directory service forest with multiple domains. The
company has a main office with 1,000 users and a single branch office with 500 users. Each office is a
separate Active Directory site. The main office Active Directory site has two domain controllers with Global
Catalog services.
Company employees must be able to work in both offices.
You need to plan the placement and configuration of domain controllers.
What should you do?
A. Deploy two additional domain controllers in the main office Active Directory site.
B. Deploy global catalog servers in the branch office Active Directory site.
C. Enable change notification on the site link between the main office Active Directory site and the branch
office Active Directory site.
D. Disable change notification on the site link between the main office Active Directory site and the branch
office Active Directory site.
Answer: B

Microsoft   70-294   certification 70-294   70-294 examen   70-294

NO.13 You have a single Active Directory directory service domain. You are preparing to create a child
domain. Your user account is in a global security group named Server Administrators. The Server
Administrators group is in the local Administrators group on all servers.
You need to install Active Directory on a server named Server1 to create the new child domain.
What should you do?
A. Have your user account added to the Domain Admins group.
B. Have your user account added to the Schema Admins group.
C. Have your user account added to the Enterprise Admins group.
D. Have your user account added to the Incoming Forest Trust Builders group.
Answer: C

Microsoft   70-294 examen   certification 70-294   certification 70-294

NO.14 You have a single Active Directory directory service domain. Your domain controllers are configured as
shown in the following table.
Domain
controller
Site FSMO role or roles
Global catalog
server
DC1 Site1
Schema Master
Domain Naming Master
Yes
DC2 Site2 ? Yes
DC3 Site3 Infrastructure Master Yes
DC4 Site4 PDC Emulator No
File and print services are on servers in Site1. Microsoft Exchange Server is installed on servers in Site2.
The HR and user provisioning applications will be placed on servers in Site3.
You are planning placement of the RID Master FSMO role.
You need to ensure proper functionality of these applications within their sites during an extended WAN
outage.
On which domain controller should you place the RID Master role?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: C

certification Microsoft   70-294   70-294   70-294   70-294 examen

NO.15 Your company has an Active Directory directory service forest with a forest root domain and a child
domain. You have two Active Directory sites named Site1 and Site2. The two sites represent physical
locations that are connected by a WAN link.
All domain controllers are located in Site2. All users log on to the child domain. Several users in Site1 use
computers that run Windows NT 4.0 operating systems.
You configure a new domain controller for each domain, and you place the new domain controllers in
Site1.
You need to ensure that all users in Site1 can change their passwords in the event of a WAN link failure.
What should you do?
A. Transfer the root domain PDC Emulator role to a domain controller in Site1.
B. Transfer the child domain PDC Emulator role to a domain controller in Site1.
C. Transfer the root domain Infrastructure Master role to a domain controller in Site1.
D. Transfer the child domain Infrastructure Master role to a domain controller in Site1.
Answer: B

Microsoft   70-294   70-294 examen   70-294 examen   70-294 examen

NO.16 Your company has a single Active Directory directory service forest named contoso.com. A partner
organization has a forest named fabrikam.com. Both forests are set to the Windows 2000 forest functional
level. Domains named contoso.com and fabrikam.com are set to Windows 2000 Native Mode.
You plan to create a forest trust relationship between contoso.com and fabrikam.com.
You need to be able to configure selective authentication for the trust relationship.
What should you do?
A. Raise the forest functional level on contoso.com and fabrikam.com to Windows Server 2003.
B. Raise the domain functional level on contoso.com and fabrikam.com to Windows Server 2003.
C. Raise the domain functional level and the forest functional level on contoso.com to Windows Server
2003.
D. Raise the domain functional level and the forest functional level on fabrikam.com to Windows Server
2003.
Answer: A

Microsoft examen   70-294   70-294 examen   70-294 examen

NO.17 Your company has a Windows Server 2003 environment with a single Active Directory directory service
forest. The forest has multiple domains and two sites named Site1 and Site2. Site1 has six domain
controllers. Two of the domain controllers are global catalog servers. Site2 has three domain controllers.
The WAN link between Site1 and Site2 is slow.
You are preparing the environment for an Active Directory application that requires universal group
membership to make authorization decisions. Application servers will be located in Site1 and Site2.
You need to prepare the Active Directory environment for the introduction of the Active Directory
application.
What should you do?
A. Increase the number of domain controllers in Site2 to four.
B. Enable universal group membership caching in Site1.
C. Add additional global catalog servers to Site1.
D. Configure at least one of the domain controllers in Site2 to be a global catalog server.
Answer: D

certification Microsoft   70-294   70-294   70-294   70-294

NO.18 Your company has a single Active Directory directory service domain with three domain controllers.
You need to move domain-wide FSMO roles to a different domain controller.
Which tool should you use?
A. Active Directory Domains and Trusts snap-in
B. Active Directory Sites and Services snap-in
C. Active Directory Users and Computers snap-in
D. Active Directory Schema snap-in
Answer: C

Microsoft examen   certification 70-294   70-294

NO.19 You have a single Active Directory directory service domain. Your company has a main office and
multiple branch offices. Each office has an Active Directory site. The company s network is not fully
routed.
You need to ensure complete replication between the Active Directory sites.
What should you do?
A. Configure site links, and disable site link bridging.
B. Configure site links to use the SMTP transport, and enable site link bridging.
C. Configure a preferred bridgehead server for each branch office site.
D. Configure a preferred bridgehead server for the main office site.
Answer: A

Microsoft examen   70-294   70-294   70-294

NO.20 Your company has a single Active Directory directory service forest named contoso.com. A partner
organization has a forest named fabrikam.com. You create a forest trust relationship between
contoso.com and fabrikam.com.
You need to enable selective authentication between contoso.com and fabrikam.com.
Which tool should you use?
A. Netdom
B. Nltest
C. Dsacls
D. Ntdsutil
Answer: A

certification Microsoft   70-294   certification 70-294

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 70-294. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Microsoft 70-649, de formation et d'essai

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Microsoft 70-649. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Microsoft 70-649. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 70-649. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Code d'Examen: 70-649
Nom d'Examen: Microsoft (TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist)
Questions et réponses: 250 Q&As

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Microsoft 70-649 de Pass4Test.

Pass4Test possède un l'outil de formation particulier à propos de test Microsoft 70-649. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Microsoft 70-649 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

70-649 Démo gratuit à télécharger: http://www.pass4test.fr/70-649.html

NO.1 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B

Microsoft examen   certification 70-649   certification 70-649   certification 70-649   certification 70-649

NO.2 You have a test lab that contains 20 client computers and a server named Server1. The client
computers run Windows 7. Server1 runs Windows Server 2008 Service Pack 2 (SP2). You install the Key
Management Service (KMS) on Server1. You need to ensure that the client computers can successfully
activate by using Server1. What should you do?
A. Upgrade Server 1 to Windows Server 2008 R2.
B. Deploy five additional client computers that run Windows 7.
C. On each client computer, run slmgr.vbs /rearm.
D. On Server1, restart the Windows Activation Technologies service.
Answer: B

certification Microsoft   70-649   70-649   70-649 examen   70-649 examen   70-649

NO.3 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C

Microsoft   70-649   certification 70-649   certification 70-649   70-649

NO.4 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
following Remote Desktop Services (RDS) role services installed: Remote Desktop Session Host (RD
Session Host) Remote Desktop Web Access (RD Web Access) You publish 10 Remote App programs on
Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access
page, they see only the Remote App programs assigned to them.
What should you modify from Remote App Manager?
A. the properties of each Remote App program
B. the RD Gateway Settings
C. the RDP Settings
D. the RD Session Host Server Settings
Answer: A

Microsoft   certification 70-649   70-649   70-649 examen

NO.5 Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role
service installed. You need to increase the bandwidth that is allocated for printing and for file transfers
between the RD Session Host server and the Remote Desktop clients. What should you do?
A. On the server, modify the RDP-Tcp settings.
B. On the server, modify the Flow Control Channel Band width registry setting.
C. On the clients, modify the Flow Control Display Band width registry setting.
D. On the clients, modify the Local Resources settings of the Remote Desktop connections.
Answer: B

Microsoft examen   70-649   70-649   70-649 examen

NO.6 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B

Microsoft examen   certification 70-649   70-649 examen   70-649   70-649 examen   70-649 examen

NO.7 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Hyper-V server role installed. Server1 hosts a virtual machine (VM) named VM1. You take a snapshot of
VM1 at 05:00 and at 19:00. You use Hyper-V Manager to delete the snapshot taken at 05:00. You need to
ensure that the files created by the 05:00 snapshot are deleted from the hard disk on Server1. What
should you do?
A. At the command prompt, run the rmdir.exe command.
B. From Windows Power Shell, run the Remove-Item cmdlet.
C. From the Hyper-V Manager console, shut down VM1.
D. From the Hyper-V Manager console, right-click VM1 and click Revert.
Answer: C

Microsoft examen   70-649   70-649 examen

NO.8 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You
configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to
create DNS records to support RD Connection Broker load balancing. Which record or records should
you create for farm1.contoso.com?
A. one Alias (CNAME) record
B. one Host (AAAA) record
C. two Host (A) records
D. two service location (SRV) records
Answer: C

Microsoft   70-649   certification 70-649   70-649   certification 70-649

NO.9 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B

Microsoft   certification 70-649   certification 70-649   70-649   70-649

NO.10 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C

certification Microsoft   70-649 examen   70-649   70-649

NO.11 Your network contains two standalone servers named Server1 and Server2. Server1 has Microsoft
SQL Server 2008 Reporting Services installed. Server2 has the SMTP Server feature installed. You
configure the Reporting Services on Server1 to send reports by using Server2. You need to ensure that
Server2 sends the reports. What should you do on Server2?
A. Configure a smart host.
B. Configure TLS encryption.
C. Modify the Relay restrictions settings.
D. Modify the Connection control settings.
Answer: C

Microsoft examen   70-649   70-649   certification 70-649   70-649 examen

NO.12 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Session Host (RD Session Host) role service installed. You need to ensure that Remote
Desktop users can use the user interface elements of Windows Aero. What should you do on Server1?
A. Change the display settings.
B. Add the Desktop Experience feature.
C. Install a DirectX 10 compliant video adapter.
D. Add the Quality Windows Audio Video Experience feature.
Answer: B

Microsoft examen   70-649   70-649 examen   70-649   certification 70-649   certification 70-649

NO.13 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B

Microsoft   70-649 examen   70-649 examen   certification 70-649   70-649

NO.14 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C

Microsoft   70-649 examen   70-649   70-649

NO.15 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. You
deploy a new virtual machine (VM) named VM1 on Server1.You need to ensure that VM1 is available if
one of the Hyper-V servers fails. What should you do?
A. Install the Network Load Balancing (NLB) feature on VM1.
B. Install the Network Load Balancing (NLB) feature on Server1.
C. Install the Failover Clustering feature on VM1. From Failover Cluster Manager on VM1, click Configure
a Service or Application.
D. From Failover Cluster Manager on Server1, click Configure a Service or Application.
Answer: D

Microsoft examen   70-649   70-649   70-649 examen   certification 70-649

NO.16 Your network contains a server named Server1. Server1 has the Remote Desktop Session Host (RD
Session Host) role service installed. You need to ensure that when a user disconnects a Remote Desktop
connection, the connection is forcibly terminated after 30 minutes. Which RDP-Tcp settings should you
configure?
A. Client Settings
B. Environment
C. Log on Settings
D. Sessions
Answer: D

Microsoft   70-649   70-649 examen   70-649   70-649

NO.17 Your network contains two servers.
The servers are configured as shown in the following table.
You need to limit the display quality of Remote Desktop connections. What should you do?
A. Create a Remote Desktop resource allocation policy (RD RAP) on Server2.
B. Create a Windows System Resource Manager (WSRM) resource allocation policy on Server1.
C. Edit the properties of the RDP-Tcp connection on Server1.
D. Edit the properties of the Remote Desktop connection authorization policy (RD CAP) on Server2.
Answer: C

Microsoft   certification 70-649   certification 70-649

NO.18 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A

Microsoft   70-649 examen   70-649   70-649

NO.19 You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS)
server role installed. The Web server hosts a Web site named Intranet1. Only internal Active Directory
user accounts have access to the Web site. The authentication settings for Intranet1 are configured as
shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the Digest Authentication role service and the URL Authorization role service to the server.
B. Add the Windows Authentication roleserviceto IIS.Configure the Windows Authentication setting to
Enabled in the Intranet1 properties.
C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the
name of the Active Directory domain.
E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to
Enabled in the Intranet1 properties.
Answer: BC

Microsoft examen   70-649   70-649   70-649 examen   70-649 examen

NO.20 Your network contains a server named Server1 that has the Hyper-V server role installed. Server1 hosts
a virtual machine (VM) named VM1. You add an additional hard disk to Server1. The hard disk is
configured as a basic disk. You need to configure VM1 to use the new hard disk as a pass-through disk.
What should you do before you configure the pass-through disk?
A. Create a simple volume.
B. Take the new hard disk offline.
C. Convert the new hard disk to a GPT disk.
D. Convert the new hard disk to a dynamic disk.
Answer: B

Microsoft   certification 70-649   70-649   certification 70-649

Avec la version plus nouvelle de Q&A Microsoft 70-649, réussir le test Microsoft 70-649 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.